"the expression, 'atonal music,' is most unfortunate--it is on a par with calling flying 'the art of not falling,' or swimming 'the art of not drowning.'. A. Schoenberg
I don't mind linking to a thread which illustrates some of the issues: GX
A bit noisy there (as usual), but some relevant points can be filtered out.
Now back to waiting for the reply from ACube, working week starts tomorrow....
Thanks again, Jack
"the expression, 'atonal music,' is most unfortunate--it is on a par with calling flying 'the art of not falling,' or swimming 'the art of not drowning.'. A. Schoenberg
the chip runs @1.64 v @ 2ghz so would be cooler than my current 1ghz A1 CPU
Thanks for sharing this. It would be a nice upgrade, huh!!
Hi poweramiga,
Wait, a G4 running at 2.0 GHz? I thought the fastest, not overclocked they made was 1.7 GHz? So, do you know if this is overclocked or not?
Also, thought the voltage has to go up at higher clock speeds?
Support Amiga Fantasy cases!!! How to program: 1. Start with lots and lots of 0's. 10. Add 1's, liberally. "Details for OS 5 will be made public in the fourth quarter of 2007, ..." - Bill McEwen Whoah!!! He spoke, a bit late.
Please read my post on the pin-compatibility ,imho, we're limited to 745X chips.
Jack
Edit: I hate to spoil parties
"the expression, 'atonal music,' is most unfortunate--it is on a par with calling flying 'the art of not falling,' or swimming 'the art of not drowning.'. A. Schoenberg
I do know that ack had a couple of cpu modules working & he gave a lot of info on the design in irc. He had a 750GL G3 @ 1.2GHz that would have cost around $250US. I would jumped all over that it they ever become available. Adam seems to have gone into hiding as of late & the status of his cpu modules is un-known.
Look, only one leg, count em, one! X1000/PA6T@1800MHz/2Gb/Radeon 4850
Where is the clock frequency generated on the micro? I see 2 crystals on the board, but my docs don't mention any settings above 933MHZ. Will any A1 support a 1.7GHZ cpu? If so, what is the upper limit?
Look, only one leg, count em, one! X1000/PA6T@1800MHz/2Gb/Radeon 4850
I'd like to know as well what happened to those CPU modules Adam announced. He can't say that there are license issues with Amiga Inc. since you don't need a license for CPU modules.
I'd like to know as well what happened to those CPU modules Adam announced. He can't say that there are license issues with Amiga Inc. since you don't need a license for CPU modules.
The last thing that I heard was that he had problems to get them running stable. Another thing I could think of (speculation) are supply problems of parts/CPU's.
At the moment Max has found existing jumper combinations to run the 7457 at 1.1, 1.3 and 1.5 GHz although at 1.5 we are again talking about overclocking which is not recommended. This was on my module for my XEG4. I don't know what the situation will be for micros as I don't own one.
That would be overclocking btw. Maximum is 933 (GL).
Jack
"the expression, 'atonal music,' is most unfortunate--it is on a par with calling flying 'the art of not falling,' or swimming 'the art of not drowning.'. A. Schoenberg
Are you sure about 1.3GHz? According to the table here, there's no such number. And all the possible combinations are covered. There're 1067, 1133 and then 1533.
Jack
"the expression, 'atonal music,' is most unfortunate--it is on a par with calling flying 'the art of not falling,' or swimming 'the art of not drowning.'. A. Schoenberg
I have checked the manual, and my (?A1-C Mini-ITX PPC Board Documentation) tells me that multipliers are from 4x to 8x with step 0.5x. so its from 533 mhz up to 1066 mhz,
Of cource there might be more that manual doesnt tell..
?A1-C 750GX@933, 512mb, Onboard GFX, Multi DVD Burner. OS4 JulyUpd
multipliers are from 4x to 8x with step 0.5x. so its from 533 mhz up to 1066 mhz,
How many dip switches are there on your module? 4 switches on A1G4 module give 4^2=16 possible settings. Not evenly spaced multipliers though. And isn't your G3? I don't see the connection...
Jack
"the expression, 'atonal music,' is most unfortunate--it is on a par with calling flying 'the art of not falling,' or swimming 'the art of not drowning.'. A. Schoenberg
Another thing I could think of (speculation) are supply problems of parts/CPU's.
There's no such thing as G4/G3 shortage now. Other parts: I doubt (but that's my opinion only). The problem is that Adam is the only one known to have new modules design atm, and he's AWOL from the scene now. Luckily there are news on ACube repair service that seems to materialize soon (stil looking for that queue)
Jack
"the expression, 'atonal music,' is most unfortunate--it is on a par with calling flying 'the art of not falling,' or swimming 'the art of not drowning.'. A. Schoenberg
On my module (G3) has those multipliers 4 plus 1 (JP1 open or short)depends frequency i choose... But this is far as my manual tells...
And what comes into my last post regarding max frequency Quote:
sundown
Where is the clock frequency generated on the micro? I see 2 crystals on the board, but my docs don't mention any settings above 933MHZ. Will any A1 support a 1.7GHZ cpu? If so, what is the upper limit?
I might have misuderstunded what does he (sundown) mean....
Please correct me if i have done so...
?A1-C 750GX@933, 512mb, Onboard GFX, Multi DVD Burner. OS4 JulyUpd
News feed
OS4 Feedback forum
OS4Depot Feedback forum
Amigabounty forum
OpenAmiga forum
AmiCygnix forum
ABC shell forum
AmiKit forum
Cinnamon Writer forum
CodeBench forum
Digital Universe forum
Dopus 5 forum
E-UAE forum
Gnash forum
Ibrowse forum
JAmiga forum
Odyssey forum
OWB forum
Qt forum
SmartFileSystem forum
Timberwolf forum
TouchDevice forum
TuneNet forum
Unsatisfactory Software forum
)
