Airprint betatesting

@sailor

If you press the tab ´Supply levels´, does it show you any information on the ink level?

@mcleppa
Great!
Last tested version 0.35 now works with HP LaserJet MFP M130fn.


Tested from Notepad and AmiPdf.

Thank you very much for great job!
This printer driver is very valuable, because of compatibility with many many modern printers.

seems to work fine here with both my HP envy 5020 printers, thankyou for your hard work. I am always in awe of you guys finding ways to access modern hardware with such pleasing results.

@sailor
That was a relief, thank you for you patience and feedback,

@Swisso
Thanx for your feedback, happy to hear it is working and that is very valuable feedback as well !

@McFly

Looked into the grimreaper issue, think the next version I release should have fixed it.
Thanx again for your help!

@mcleppa

Will 0.35 be uploaded to OS4 Depot ?

@mcleppa

V3 still not working for me. It picks up my rpinter much quicker when I search though...sent you debug.txt before via emailbut no response so I'll copy mine here:

Start Receive message
HTTP/1.1 200 OK
Cache-Control: no-cache
Accept-Encoding: identity
Upgrade: TLS/1.2, TLS/1.1, TLS/1.0
Content-Length: 214
Content-Type: application/ipp
Content-Language: *
Connection: Keep-Alive
Pragma: no-cache

EOH status = 2
jobcreated content size = 0
chunked = FALSE
content_length > 0
received length = 214
success = 1, length = 0
Status code - 0x0000
0x47 - (null)
Value - utf-8
0x48 - attributes-charset
Value - en
0x21 - attributes-natural-language
0x21 - marker-levels
0x21 - marker-high-levels
0x42 - marker-low-levels
Value - BK
0x44 - marker-names
Value - toner
0x42 - marker-types
Value - #000000
Print Document
------ Start AirPrint Process ------
--- ProcSSL Init ---
Start Process
LOOP QUIT = 0
======= airprint proc message START ======
AirPrint Message PAGES PRINTED = 0
Airprint Proc Reply Contains
start = 1
receiving = 0
stop = 0
filetype = 6
file = T:Airprint_Spooler/spool_1/spool_1
spooldir = T:Airprint_Spooler/spool_1/
pagecount = 1
lastpage = 1
pages_printed = 0
printer_selected = 0
job_uri =
canceljob = 0
Pages Printed = 0
Get Printer Status
Start Receive message
HTTP/1.1 200 OK
Cache-Control: no-cache
Accept-Encoding: identity
Upgrade: TLS/1.2, TLS/1.1, TLS/1.0
Content-Length: 142
Content-Type: application/ipp
Content-Language: *
Connection: Keep-Alive
Pragma: no-cache

EOH status = 2
jobcreated content size = 0
chunked = FALSE
content_length > 0
received length = 142
success = 1, length = 0
Status code - 0x0000
0x47 - (null)
Value - utf-8
0x48 - attributes-charset
Value - en
0x23 - attributes-natural-language
Printer-State = 3
0x44 - printer-state
Value - opc-life-over-warning
printer-state-reasons = opc-life-over-warning
Validate Printjob
Start Receive message
HTTP/1.1 200 OK
Cache-Control: no-cache
Accept-Encoding: identity
Upgrade: TLS/1.2, TLS/1.1, TLS/1.0
Content-Length: 72
Content-Type: application/ipp
Content-Language: *
Connection: Keep-Alive
Pragma: no-cache

EOH status = 2
jobcreated content size = 0
chunked = FALSE
content_length > 0
received length = 72
success = 1, length = 0
Status code - 0x0000
0x47 - (null)
Value - utf-8
0x48 - attributes-charset
Value - en
Validate Success = 1
POST / HTTP/1.1
Host: 192.168.2.26:631
Transfer-Encoding: chunked
Content-Type: application/ipp
Connection: close

Printing Pagenum = 1
file = T:Airprint_Spooler/spool_1/text_1.rgb
Filetype = 6
------Printing Page Success = 1------
Start Receive message
HTTP/1.1 200 OK
Cache-Control: no-cache
Accept-Encoding: identity
Upgrade: TLS/1.2, TLS/1.1, TLS/1.0
Content-Length: 72
Content-Type: application/ipp
Content-Language: *
Connection: Keep-Alive
Pragma: no-cache

EOH status = 2
jobcreated content size = 0
chunked = FALSE
content_length > 0
received length = 72
success = 1, length = 0
Status code - 0x0000
0x47 - (null)
Value - utf-8
0x48 - attributes-charset
Value - en
Start Receive message
HTTP/1.1 200 OK
Cache-Control: no-cache
Accept-Encoding: identity
Upgrade: TLS/1.2, TLS/1.1, TLS/1.0
Content-Length: 142
Content-Type: application/ipp
Content-Language: *
Connection: Keep-Alive
Pragma: no-cache

EOH status = 2
jobcreated content size = 0
chunked = FALSE
content_length > 0
received length = 142
success = 1, length = 0
Status code - 0x0000
0x47 - (null)
Value - utf-8
0x48 - attributes-charset
Value - en
0x23 - attributes-natural-language
Printer-State = 3
0x44 - printer-state
Value - opc-life-over-warning
printer-state-reasons = opc-life-over-warning
Statevalue = 3
func printer state = idle
LOOP QUIT = 0
======= airprint proc message START ======
AirPrint Message PAGES PRINTED = 1
Airprint Proc Reply Contains
start = 1
receiving = 0
stop = 0
filetype = 6
file = T:Airprint_Spooler/spool_1/spool_1
spooldir = T:Airprint_Spooler/spool_1/
pagecount = 1
lastpage = 1
pages_printed = 1
printer_selected = 0
job_uri =
canceljob = 0
======= airprint LAST PAGE = TRUE, Checking for printer is finished
Start Receive message
HTTP/1.1 200 OK
Cache-Control: no-cache
Accept-Encoding: identity
Upgrade: TLS/1.2, TLS/1.1, TLS/1.0
Content-Length: 142
Content-Type: application/ipp
Content-Language: *
Connection: Keep-Alive
Pragma: no-cache

EOH status = 2
jobcreated content size = 0
chunked = FALSE
content_length > 0
received length = 142
success = 1, length = 0
Status code - 0x0000
0x47 - (null)
Value - utf-8
0x48 - attributes-charset
Value - en
0x23 - attributes-natural-language
Printer-State = 3
0x44 - printer-state
Value - opc-life-over-warning
printer-state-reasons = opc-life-over-warning
AirPrint Message PAGES PRINTED = 0
Finished Printing Document
--- ProcSSL Cleanup ---
------ End AirPrint Process ------

@328gts

Sorry for late reply, but I have sent you a mail with some new versions you can test out.

@SinanSam460

Yes I will upload it shortly so you can all have a try.

I have uploaded a new version you can try, some bugfixes and changes.

Can confirm, just like AirScan, that AirPrint .30 works on my HP Smart Tank 7300 Series All-In-One for printing.

Limited test allowed me to print a text file saved in NotePad and a .PDF I copied over from my linux computer.

Great Work!

TJ

@mcleppa

AirPrint 0.36 seems to work very well with my Brother DCP-L2532DW printer. The installation and setup were straightforward. I've successfully printed a few plain text files directly from the AirPrint utility, and a page from a PDF via AmiPDF. Single-sided as well as duplex printing works, which is great.

Thanks, I'm impressed!

@AmigaSociety and @Trixie
Thanx for feedback, good to hear it is working for you guys.

Works well with Lexmark 410 cn printer
Thanks

@mcleppa

Thanks for your email reply. Great news in that now I can print using v0.352 on my Brother L2740DW

also v0.353 and v0.354 don't work.

Please let us know where we can send our donations

@328gts

Donations are very kind of you and appreciated, added link to my homepage at the original post. Thank you

@mcleppa

Along with making a small donation using the link at your homepage (not much but all I can afford at the moment), I also made a video in hopes of spreading the news about Airprint outside of these forums.

Thanks for a nifty application for the AmigaOS 4.1 systems.

TJ

@mcleppa
Just donated some for your excellent work! Thank you!

@mcleppa

Airprint seems not to find my HP color laserjet CP1515n printer on the network, whether in automatic or manual detection.

See reply from Network