Login
Username:

Password:

Remember me



Lost Password?

Register now!

Sections

Who's Online
36 user(s) are online (22 user(s) are browsing Forums)

Members: 1
Guests: 35

FlynnTheAvatar, more...

Headlines

 
  Register To Post  

(1) 2 »
Morphos 3.17 stopped booting on my AmigaOne X5000
Quite a regular
Quite a regular


See User information
Hi Amigans!!!

I am in a mess.My Morphos stopped working about some weeks,more than a month.And today and days ago I tried ro resurrect with the help of a USB stick and a CD-RW with latest Morphos burned on it but no luck.In fact it doesn't boot from this media at all.And I know Morphos is not dead bacause it show its Morphos logo,then a white screen with the Ambient word and the butterfly and itI musn't go any further

I like Morphos for the time being specially for the fact that I can login or use Facebook directly and in reality I have a lot to learn and improve on this Amiga system.But it feels great to me ,even unregistered.

Last weeks I did a similar post like this on AmigaWorld.net and the folks tried but not result at all.

So how can I boot and restore Morphos again?

I think that the problem came months ago when I leave Wayfarer open bacause I waited to close,but it didn't succeded.

What do you think about this Morphos problem? Is it restorable?

I hope someone can help me to boot Morphos again.

Thanks


Edited by MamePPCA1 on 2022/7/1 19:54:55
Edited by MamePPCA1 on 2022/11/21 11:09:47
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
Go to top
Re: Morphos 3.15 stopped booting on my AmigaOne X5000
Home away from home
Home away from home


See User information
@MamePPCA1

Quote:
Hi Amigans!!!


its Amigans, not Morphns maybe you should ask this on a MorphOS forum?

(NutsAboutAmiga)

Basilisk II for AmigaOS4
AmigaInputAnywhere
Excalibur
and other tools and apps.
Go to top
Re: Morphos 3.15 stopped booting on my AmigaOne X5000
Quite a regular
Quite a regular


See User information
@LiveForIt

OK I know is AmigaOS but I thinked people here could have desirable knowledge about the Morphos system.

I am not registered on any Morphos forum,neither I know of any.

Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
Go to top
Re: Morphos 3.15 stopped booting on my AmigaOne X5000
Home away from home
Home away from home


See User information
@MamePPCA1

Have you tried google?

I just want to be clear about this, this is like going to BMW and asking Volvo questions.

(NutsAboutAmiga)

Basilisk II for AmigaOS4
AmigaInputAnywhere
Excalibur
and other tools and apps.
Go to top
Re: Morphos 3.15 stopped booting on my AmigaOne X5000
Quite a regular
Quite a regular


See User information
@LiveForIt

Yes!!! And I found Morphzone.

I am registered on this page,but when I am logged in,I musn't find the option to post.

Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
Go to top
Re: Morphos 3.15 stopped booting on my AmigaOne X5000
Not too shy to talk
Not too shy to talk


See User information
@MamePPCA1

Seems like you have nothing but trouble with your X5000.
Have you built it yourself or bought a complete system from a dealer?

I built my own X5000 6,5 years ago and never had an issue, bought only premium parts for it. Still rollin hard as my main computer.

Had 2 automatic shutdowns in those 6,5 years, hot summer days and the MCU saves the CPU.

1989-> A500, A600, A3000, A4000, A1200, CD32, µA1, PegII, A1XE, CDTV, Amy/416D79, A1X5000, Vampire 500 V2+, Vampire 600 V2, Amy-ITX, Denise ITX <-2022
Go to top
Re: Morphos 3.15 stopped booting on my AmigaOne X5000
Quite a regular
Quite a regular


See User information
@khayoz

OK I understand how it goes your AmigaOne X5000.

I buyed the machine in late 2016 and received in February 2017 with the working hands of Amedia France.


Edited by MamePPCA1 on 2022/7/9 20:47:51
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
Go to top
Re: Morphos 3.15 stopped booting on my AmigaOne X5000
Quite a regular
Quite a regular


See User information
@MamePPCA1
Have you install the last version 3.17? Also there is a know problem for X5000 users and Radeon cards because MorphOS hasn't support ro these new cards while AmigaOS4 with Nova, yes, this problem has been comment in Morphzone.

Go to top
Re: Morphos 3.15 stopped booting on my AmigaOne X5000
Not too shy to talk
Not too shy to talk


See User information
@MamePPCA1 (newlight)

I have 4 questions for you ...

1) Did you upgrade your graphics card recently?

2) Do you share any files between OS4 and MorphOS?

3) Are OS4 and MorphOS on the same hard drive?

4) Can OS4 see the MorphOS system partition or Work partition?

---
redfox


Edited by redfox on 2022/7/2 21:40:02
Go to top
Re: Morphos 3.15 stopped booting on my AmigaOne X5000
Not too shy to talk
Not too shy to talk


See User information
@MamePPCA1

I am sorry to see on MorphZone that you had more difficulties.
Sounds like you have now lost MorphOS and OS4.

😵

Go to top
Re: Morphos 3.15 stopped booting on my AmigaOne X5000
Home away from home
Home away from home


See User information
@MamePPCA1

As was suggested on Morph-Zone maybe it’s time to send your HD to friend who can partition it correct, format it and reinstall AmigaOS4.1 (the correct version).

Dual booting is more hazel then its worth, and I remember dual booting windows and Linux. VIA was in the chipset industry and it was a new kid on the block, the chips were hugely popular due to low price, this forced me into using Linux as my main OS, but from time to time, my NTLoader was overwritten by the LILO bootloader. But as my friends Antique and Me and one of the swappers from Demo group Crusaders (before the Swedes took over), we used to play StarCraft in the summer, and I had to always reinstall windows, this did take about 1 hour or so, they never happy about that. I was huge Linux support for a while. I even got some games for Loki Entertainment, the writing was on the wall, too many developers, too few gamers, and too many wanted everything to be open and free.

The point is you always run risk of trashing your partition due to incompatible filesystems. and let’s be trueful you’re not good at following advice, and you should really understand the two OS well, to do this correct. when dual boot system you can’t just 100% follow simple guides, you need to make sure two operating system, do not overwrite etch other during boot, and during system updates.

One thing you can do, is use a swappable hd driver, to avoid that.
https://www.startech.com/en-eu/hdd/hsb220sat25b

(NutsAboutAmiga)

Basilisk II for AmigaOS4
AmigaInputAnywhere
Excalibur
and other tools and apps.
Go to top
Re: Morphos 3.15 stopped booting on my AmigaOne X5000
Just popping in
Just popping in


See User information
@MamePPCA1

I am also running AmigaOS and MorphOS on my X5000.
As my Ami knowledge is also not that good, i had some scary moments myself...but.. its running now..

Since AmigaOS and MorphOS by default both use a DH0, DH1 SYS: WORK: etc.. i did this... (if i recall correct)

I installed morphos on a seperate HD using the folowing..

DH0 => became DH0.1 and i labeled this MOSSYS:
DH1 => became DH1.1 and i labeled this MOSWORK:

Now both systems dont bite each other.

Hope this points you in the right direction.

AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 570 / ATI X1900 / M-Audio 5.1 -> AmigaOS 4.1 FE / Ubuntu Linux / MorphOS
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Go to top
Re: Morphos 3.15 stopped booting on my AmigaOne X5000
Just popping in
Just popping in


See User information
@SkatemanQuote:
Skateman wrote:
Since AmigaOS and MorphOS by default both use a DH0, DH1 SYS: WORK: etc.. i did this... (if i recall correct)

I installed morphos on a seperate HD using the folowing..

DH0 => became DH0.1 and i labeled this MOSSYS:
DH1 => became DH1.1 and i labeled this MOSWORK:

You probably remember wrong, because labeling to MOSSYS: will break things. MorphOS has the MOSSYS: assign which points to the SYS:MorphOS/ directory (MorphOS separates OS files from user files, and OS files reside in this assign). So, relabeling a drive would collide with it.

To avoid confusion I would change the device names of partitions manually to something more explanatory rather than letting OS name them as .1 etc. It's best to do this before or immediatelly after installing the OS, before any applications or configs start pointing with device names (which is a bad practise anyway, but some will do it anyway).


SYS: is always automatically assigned to the partition that system was booted from, so this works correctly always and no need to worry about it, and never try to change it in any case.

I probably would rename device names of MorphOS partitions, for example, to MDH0:, MDH1:, MDH2: etc.

By default the volume name for the system partition is Workbench: on AmigaOS and System: on MorphOS, so this doesn't clash and you can leave them on those names.

Other partitions like Work: can be relabeled as you wish. For example, MOSWork: would work :)

Go to top
Re: Morphos 3.15 stopped booting on my AmigaOne X5000
Just popping in
Just popping in


See User information
I made a typo ... sorry...my DH0.1 is named MOSYS: not MOSSYS:
DH1.1 is named MOSWORK:

All running fine as we speak.
Thanks!!


Edited by Skateman on 2022/7/4 10:36:33
Edited by Skateman on 2022/7/4 10:42:55
AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 570 / ATI X1900 / M-Audio 5.1 -> AmigaOS 4.1 FE / Ubuntu Linux / MorphOS
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Go to top
Re: Morphos 3.15 stopped booting on my AmigaOne X5000
Quite a regular
Quite a regular


See User information
@redfox

Here goes my answers:

1.No
2.No
3.No
4.Never tried but I think no

Hope this helps

Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
Go to top
Re: Morphos 3.15 stopped booting on my AmigaOne X5000
Quite a regular
Quite a regular


See User information
@Skateman

Thank you Skateman!

To be honest I never expected to reach such my actual situation.

I am lost now.

Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
Go to top
Re: Morphos 3.15 stopped booting on my AmigaOne X5000
Quite a regular
Quite a regular


See User information
@Skateman

OK this nomenclature is good to know,but now that I had re-installed AmigaOS 4.1 FE this evening...

How can I boot or install Morphos on a pendrive or CD-RW as I tried this evening and manage to boot?

I want to install Morphos to use Wayfarer and Facebook among being a new system for me.

Morphos seems good here.

Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
Go to top
Re: Morphos 3.15 stopped booting on my AmigaOne X5000
Quite a regular
Quite a regular


See User information
@MamePPCA1

Hi again,I'm back!!!

OK the problem comes here since 2 or 3 weeks that I have Morphos installed without booting.I tried several times with a CD-RW and a pendrive and the result was 0.On Fienix I formatted all the Morphos partitions cause they didn't boot and that was how I did on the previous succesfull attempt.I did the formats with gparted.

I entered "usb reset" and "bootmorphos" but it always give me the error message as:

"morphos bootloader version 1.10"

Then:

"failed to scan partitions on device 1"

And finally:

"failed to load a valid MorphOS kernel"

This on "boot from optical"

With the USB pendrive an MorphOS CD-RW prepared to boot and attached

What can I do? I want to re-install MorphOS again!

Thanks in advance

Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
Go to top
Re: Morphos 3.15 stopped booting on my AmigaOne X5000
Just popping in
Just popping in


See User information
@MamePPCA1

Step1: Download MorphOS 3.17
https://www.morphos-team.net/downloads

Step2: Burn the downloaded image to USB drive

Step3: Start your X5000 with the USB drive connected.

Step4: When the boingball starts spinning, press esc

Step5: Go to u-boot cmd line and enter usb reset and press enter

Step6: Type ami to go back to the u-boot menu

Step7: Choose the option to boot MorphOS and it will boot from USB

When done you can re-install

Good luck

AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 570 / ATI X1900 / M-Audio 5.1 -> AmigaOS 4.1 FE / Ubuntu Linux / MorphOS
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Go to top
Re: Morphos 3.15 stopped booting on my AmigaOne X5000
Quite a regular
Quite a regular


See User information
@Skateman

I had downloaded Morphos 3.17 and burned to a USB pendrive before.

Now I will have to enter the options on U-Boot

Meny thanks skateman and all for read.

Trying later

Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
Go to top

  Register To Post
(1) 2 »

 




Currently Active Users Viewing This Thread: 1 ( 0 members and 1 Anonymous Users )




Powered by XOOPS 2.0 © 2001-2016 The XOOPS Project