Login
Username:

Password:

Remember me



Lost Password?

Register now!

Sections

Who's Online
42 user(s) are online (38 user(s) are browsing Forums)

Members: 0
Guests: 42

more...

Support us!

Headlines

 
  Register To Post  

« 1 2 3 (4) 5 »
Re: ACube/AEon - more info about PCIe cards in SAM440, please
Just popping in
Just popping in


See User information
@geennaam

Quote:
This adapter is based on the Pericom PI7C9X111SL. It offers a ... transparent bridge



Can this Transparent mode be set by the user?
Transparent mode as in that the bridge chip is undetectable by the system? so that it would not show up if you use the "pci 0" or "pci 1" commands to scan for it in uboot?

That would be rather excellent, as the AmigaOne XE has difficulties working with nested PCI devices. e.g. invalid interupts in 33mhz slots and nothing showing up in the 66mhz slot.

Go to top
Re: ACube/AEon - more info about PCIe cards in SAM440, please
Quite a regular
Quite a regular


See User information
@Helloworld


No. Transparent in the PCI context means that the host is able to scan for devices behind the bridge without need for a driver.



Go to top
Re: ACube/AEon - more info about PCIe cards in SAM440, please
Not too shy to talk
Not too shy to talk


See User information
Halleluiah!

I'm happy to report that with the GFS (Geennaam's Frankenstein Solution)
my SAM440Flex works with a VTX HD 7750(VX7750 1GBD5-DH) GPU!
UBoot is visible, WB too. The Lite driver does not allow much but lets wait untill Monday when I buy ES2.0.

Someone brave enough to test SAM440+GFS+RX550?
There is no UVD for SI cards yet and I have to stop spending money

Thanks geennaam and Spectre660

CD32/A500/A600/A600+Furia/A1200/A4000D+A2320+PiccoloSD64/Sam440 flex 800MHz RAM 1GB HD7750 128MB OS4.1 SBLive! ->
Go to top
Re: ACube/AEon - more info about PCIe cards in SAM440, please
Quite a regular
Quite a regular


See User information
@mr2

Nice, congrats.

Cheers

Go to top
Re: ACube/AEon - more info about PCIe cards in SAM440, please
Quite a regular
Quite a regular


See User information
@mr2

The RadeonRX drivers halts during initialization with my RX560. I doubt that a RX550 will work.


Go to top
Re: ACube/AEon - more info about PCIe cards in SAM440, please
Quite a regular
Quite a regular


See User information
@geennaam

Congratulations everyone .

Would be useful if someone could try a Radeon RX model known to work with a Sam460ex/cr to make sure that the problem is not an issue with a particular RX card model.

Go to top
Re: ACube/AEon - more info about PCIe cards in SAM440, please
Not too shy to talk
Not too shy to talk


See User information
@geennaamQuote:
The RadeonRX drivers halts during initialization with my RX560.


Exactly the same with my RX460 ( works fine on PC workstation)

Type: ASUS Dual RX460 (DUAL-RX460-2G)
No U-boot, RadeonRX halts.

Tested on:
Sam440ep-flex
AmigaOne X1000 (here I have no debuglog, but symptoms are the same)

AmigaOS3: Amiga 1200
AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000
MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
Go to top
Re: ACube/AEon - more info about PCIe cards in SAM440, please
Quite a regular
Quite a regular


See User information
@sailor

I've made a bug report about this issue. But I don't think that it will be high on the priority list. So a southen island card will be the best available (for now).

Go to top
Re: ACube/AEon - more info about PCIe cards in SAM440, please
Not too shy to talk
Not too shy to talk


See User information
@geennaam
yes, I know that the priority will not be high.
It is excellent, that Southern Isands now works on Sam440. It have Warp3D and 3DNova. The RX - Polaris card have only one advatage - UVD. But who knows, maybe there will be UVD for Southern Islands too.

AmigaOS3: Amiga 1200
AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000
MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
Go to top
Re: ACube/AEon - more info about PCIe cards in SAM440, please
Not too shy to talk
Not too shy to talk


See User information
The RX driver was updated. I guess, no change?

Max from ACube posted in another thread...

I've identified what's the problem with newer Radeon Bios card under U-boot on the Sam boards, but ATM I didn't find any solution about it.

Finger crossed for the solution.

CD32/A500/A600/A600+Furia/A1200/A4000D+A2320+PiccoloSD64/Sam440 flex 800MHz RAM 1GB HD7750 128MB OS4.1 SBLive! ->
Go to top
Re: ACube/AEon - more info about PCIe cards in SAM440, please
Not too shy to talk
Not too shy to talk


See User information
I tested my RX460 with previous driver version. I will try with the new one and post here the debuglog, but probably next week, now I have very little time.

AmigaOS3: Amiga 1200
AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000
MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
Go to top
Re: ACube/AEon - more info about PCIe cards in SAM440, please
Not too shy to talk
Not too shy to talk


See User information
I again tried on Sam440ep-flex gfx RX460 (ASUS DUAL-RX460-O2G) with new RadeonRX.chip 2.5 (14.4.2021).
Again no success. Black screen with U-boot and workbench.
Debug with P17C9 bridge:
U-Boot 1.3.1g (Dec  4 2020 17:35:10)  CPU:   AMCC PowerPC 440EP RevC at 733.333 MHz (PLB=146OPB=73EBC=73 MHz)        I2C boot EEPROM enabled        Bootstrap Option H Boot ROM Location I2C (Addr 0x52)        Internal PCI arbiter enabledPCI async ext clock used        32 kB I-Cache 32 kB D-Cache BoardSam440ep-flex I2C:   ready DRAM:  1024 MB PCI:   Bus Dev VenId DevId Class Int         01  04  1013  6005  0401  00         01  05  1033  0035  0c03  00         01  05  1033  0035  0c03  00         01  05  1033  00e0  0c03  00         00  0a  12d8  8150  0604  00         02  00  1002  67ef  0300  ff         02  00  1002  aae0  0403  ff         00  0c  12d8  e111  0604  00         00  0e  1095  3114  0180  00 In:    serial Out:   serial Err:   serial Net:   ppc_4xx_eth0ppc_4xx_eth1 SM502not found VGA:   1  RadeonRX (2): Identified the chipset as: POLARIS11 RadeonRX (2): Graphics card name isRadeon RX Polaris11 RadeonRX (2):     If - and only if - your card does not work or does not work optimally     please submit a bug report at:     http://www.amiga.org/developer/bugreports      Remember to include the driver version, and the following card details:     0x67EF:0x1043:0x04B8: <name of board>     and *please* describe the problems you are seeing in detail. graphics.library PPC440ep optimizations enabled RadeonRX (5): findRXCard called RadeonRX (5): Card 0 (0): 0x1002, 0x67EF, Radeon RX Polaris11, supported, active RadeonRX (5): Found supported card RadeonRX (5): initRXCard called RadeonRX (5): Initializing card RadeonRX (2): Obtaining ITimer interface RadeonRX (2): Got ITimer interface RadeonRX (2): Returning from LibOpen(). RadeonRX (0): RadeonRX.chip 2.5 (14.4.2021) RadeonRX (6): <rxOpen> RadeonRX (4): PCI device is a graphics card. RadeonRX (2): Identified the chipset as: POLARIS11 RadeonRX (2): Graphics card name is: Radeon RX Polaris11 RadeonRX (2):     If - and only if - your card does not work or does not work optimally     please submit a bug report at:     http://www.amiga.org/developer/bugrep ...  driver version, and the following card details:     0x67EF:0x1043:0x04B8: <name of board>     and *please* describe the problems you are seeing in detail. RadeonRX (5): RadeonRX (5): PCI_DEVICE_ID: 0xE111 RadeonRX (5): RadeonRX (5): PCI_VENDOR_ID: 0x12D8 RadeonRX (5): RadeonRX (5): PCI_STATUS: RadeonRX (5): ECP enable, RadeonRX (5): 66 MHz capable, RadeonRX (5): Fast back-to-back capable, RadeonRX (5): RadeonRX (5): DEVSEL# timing 1, RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5):  RadeonRX (5): RadeonRX (5): PCI_COMMAND: RadeonRX (5): I/O space enabled, RadeonRX (5): Mem space enabled, RadeonRX (5): Bus master enabled, RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5):  RadeonRX (5): RadeonRX (5): PCI_CLASS: 0x60400 RadeonRX (5): RadeonRX (5): PCI_REVISION_ID: 0x2 RadeonRX (5): RadeonRX (5): PCI_HEADER_TYPE: 0x1 RadeonRX (5): RadeonRX (5): PCI_LATENCY_TIMER: 128 RadeonRX (5): RadeonRX (5): PCI_CACHE_LINE_SIZE: 32 RadeonRX (5): RadeonRX (5): PCI_SEC_LATENCY_TIMER: 0 RadeonRX (5): RadeonRX (5): PCI_PRIMARY_BUS: 0 RadeonRX (5): RadeonRX (5): PCI_SECONDARY_BUS: 2 RadeonRX (5): RadeonRX (5): PCI_SUBORDINATE_BUS: 2 RadeonRX (5): RadeonRX (5): PCI_SEC_STATUS: RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): DEVSEL# timing 0, RadeonRX (5): RadeonRX (5): RadeonRX (5): Received master abort, RadeonRX (5): RadeonRX (5): RadeonRX (5):  RadeonRX (5): RadeonRX (5): PCI_IO_BASE (full): 0x1000 RadeonRX (5): RadeonRX (5): PCI_IO_LIMIT (full): 0x1FFF RadeonRX (5): RadeonRX (5): PCI_MEMORY_BASE (full): 0xA0100000 RadeonRX (5): RadeonRX (5): PCI_MEMORY_LIMIT (full): 0xC02FFFFF RadeonRX (5): RadeonRX (5): PCI_PREF(ETCH)_MEMORY_BASE (full): 0x10000000 RadeonRX (5): RadeonRX (5): PCI_PREF(ETCH)_MEMORY_LIMIT (full): 0xFFFFF RadeonRX (5): RadeonRX (5): PCI_BRIDGE_CONTROL: RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): VGA enable, RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5):  RadeonRX (5): RadeonRX (5): PCI_INTERRUPT_PIN: 0x1 RadeonRX (2): Cannot enable blind prefetch for PCI:0.12,0, because this device doesn't support it. RadeonRX (5): RadeonRX (5): Cannot print bridge configuration for PCI:0.0,0, because it is not a bridge device. RadeonRX (2): Cannot enable blind prefetch for PCI:0.0,0, because this device doesn't support it. RadeonRX (4): Obtaining memory and I/O addresses and sizes RadeonRX (4): Video RAM at: 0xB0000000, size is 268435456 bytes RadeonRX (4): Graphics card MMIO range at: 0x0xC0200000, size is 262144 bytes RadeonRX (4): Graphics card doorbell range at: 0x0xC0000000, size is 2097152 bytes RadeonRX (1): drm_mode_create_standard_properties unimplemented RadeonRX (0): System doesn't have full memory coherence. Compensating... RadeonRX (6): <rxEarlyInit> RadeonRX (6): add ip block number 0 <vi_common> RadeonRX (6): add ip block number 1 <gmc_v8_0> RadeonRX (6): add ip block number 2 <tonga_ih> RadeonRX (6): add ip block number 3 <amdgpu_powerplay> RadeonRX (6): add ip block number 4 <dce_v11_0> RadeonRX (6): add ip block number 5 <gfx_v8_0> RadeonRX (6): add ip block number 6 <uvd_v6_0> RadeonRX (6): </amdgpu_device_parse_gpu_info_fw result="0x00000000"> RadeonRX (6): Early init of block <vi_common>


Debug with PEX8111 bridge:
U-Boot 1.3.1g (Dec  4 2020 17:35:10)  CPU:   AMCC PowerPC 440EP RevC at 733.333 MHz (PLB=146OPB=73EBC=73 MHz)        I2C boot EEPROM enabled        Bootstrap Option H Boot ROM Location I2C (Addr 0x52)        Internal PCI arbiter enabledPCI async ext clock used        32 kB I-Cache 32 kB D-Cache BoardSam440ep-flex I2C:   ready DRAM:  1024 MB PCI:   Bus Dev VenId DevId Class Int         01  04  1013  6005  0401  00         01  05  1033  0035  0c03  00         01  05  1033  0035  0c03  00         01  05  1033  00e0  0c03  00         00  0a  12d8  8150  0604  00         02  00  1002  67ef  0300  ff         02  00  1002  aae0  0403  ff         00  0c  10b5  8111  0604  00         00  0e  1095  3114  0180  00 In:    serial Out:   serial Err:   serial Net:   ppc_4xx_eth0ppc_4xx_eth1 SM502not found VGA:   1  RadeonRX (2): Identified the chipset as: POLARIS11 RadeonRX (2): Graphics card name isRadeon RX Polaris11 RadeonRX (2):     If - and only if - your card does not work or does not work optimally     please submit a bug report at:     http://www.amiga.org/developer/bugreports      Remember to include the driver version, and the following card details:     0x67EF:0x1043:0x04B8: <name of board>     and *please* describe the problems you are seeing in detail. graphics.library PPC440ep optimizations enabled RadeonRX (5): findRXCard called RadeonRX (5): Card 0 (0): 0x1002, 0x67EF, Radeon RX Polaris11, supported, active RadeonRX (5): Found supported card RadeonRX (5): initRXCard called RadeonRX (5): Initializing card RadeonRX (2): Obtaining ITimer interface RadeonRX (2): Got ITimer interface RadeonRX (2): Returning from LibOpen(). RadeonRX (0): RadeonRX.chip 2.5 (14.4.2021) RadeonRX (6): <rxOpen> RadeonRX (4): PCI device is a graphics card. RadeonRX (2): Identified the chipset as: POLARIS11 RadeonRX (2): Graphics card name is: Radeon RX Polaris11 RadeonRX (2):     If - and only if - your card does not work or does not work optimally     please submit a bug report at:     http://www.amiga.org/developer/bugrep ...  driver version, and the following card details:     0x67EF:0x1043:0x04B8: <name of board>     and *please* describe the problems you are seeing in detail. RadeonRX (5): RadeonRX (5): PCI_DEVICE_ID: 0x8111 RadeonRX (5): RadeonRX (5): PCI_VENDOR_ID: 0x10B5 RadeonRX (5): RadeonRX (5): PCI_STATUS: RadeonRX (5): ECP enable, RadeonRX (5): 66 MHz capable, RadeonRX (5): RadeonRX (5): RadeonRX (5): DEVSEL# timing 1, RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5):  RadeonRX (5): RadeonRX (5): PCI_COMMAND: RadeonRX (5): I/O space enabled, RadeonRX (5): Mem space enabled, RadeonRX (5): Bus master enabled, RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5):  RadeonRX (5): RadeonRX (5): PCI_CLASS: 0x60400 RadeonRX (5): RadeonRX (5): PCI_REVISION_ID: 0x21 RadeonRX (5): RadeonRX (5): PCI_HEADER_TYPE: 0x1 RadeonRX (5): RadeonRX (5): PCI_LATENCY_TIMER: 128 RadeonRX (5): RadeonRX (5): PCI_CACHE_LINE_SIZE: 32 RadeonRX (5): RadeonRX (5): PCI_SEC_LATENCY_TIMER: 0 RadeonRX (5): RadeonRX (5): PCI_PRIMARY_BUS: 0 RadeonRX (5): RadeonRX (5): PCI_SECONDARY_BUS: 2 RadeonRX (5): RadeonRX (5): PCI_SUBORDINATE_BUS: 2 RadeonRX (5): RadeonRX (5): PCI_SEC_STATUS: RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): DEVSEL# timing 0, RadeonRX (5): RadeonRX (5): RadeonRX (5): Received master abort, RadeonRX (5): RadeonRX (5): RadeonRX (5):  RadeonRX (5): RadeonRX (5): PCI_IO_BASE (full): 0x1000 RadeonRX (5): RadeonRX (5): PCI_IO_LIMIT (full): 0x1FFF RadeonRX (5): RadeonRX (5): PCI_MEMORY_BASE (full): 0xA0200000 RadeonRX (5): RadeonRX (5): PCI_MEMORY_LIMIT (full): 0xC02FFFFF RadeonRX (5): RadeonRX (5): PCI_PREF(ETCH)_MEMORY_BASE (full): 0x10000000 RadeonRX (5): RadeonRX (5): PCI_PREF(ETCH)_MEMORY_LIMIT (full): 0xFFFFF RadeonRX (5): RadeonRX (5): PCI_BRIDGE_CONTROL: RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): VGA enable, RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5): RadeonRX (5):  RadeonRX (5): RadeonRX (5): PCI_INTERRUPT_PIN: 0x1 RadeonRX (4): Enabling blind prefetch on the PEX 8111 bridge RadeonRX (5): RadeonRX (5): Cannot print bridge configuration for PCI:0.0,0, because it is not a bridge device. RadeonRX (4): Obtaining memory and I/O addresses and sizes RadeonRX (4): Video RAM at: 0xB0000000, size is 268435456 bytes RadeonRX (4): Graphics card MMIO range at: 0x0xC0200000, size is 262144 bytes RadeonRX (4): Graphics card doorbell range at: 0x0xC0000000, size is 2097152 bytes RadeonRX (1): drm_mode_create_standard_properties unimplemented RadeonRX (0): System doesn't have full memory coherence. Compensating... RadeonRX (6): <rxEarlyInit> RadeonRX (6): add ip block number 0 <vi_common> RadeonRX (6): add ip block number 1 <gmc_v8_0> RadeonRX (6): add ip block number 2 <tonga_ih> RadeonRX (6): add ip block number 3 <amdgpu_powerplay> RadeonRX (6): add ip block number 4 <dce_v11_0> RadeonRX (6): add ip block number 5 <gfx_v8_0> RadeonRX (6): add ip block number 6 <uvd_v6_0> RadeonRX (6): </amdgpu_device_parse_gpu_info_fw result="0x00000000"> RadeonRX (6): Early init of block <vi_common>


This card also not works in AmigaOneX1000.
If I find somewhere Radeon RX card which works for sure with RadeonRX on Sam460 or X5000 - for example Kas1e's RadeonRX 560 - I will try it on Sam440ep-flex.
So, next time...

AmigaOS3: Amiga 1200
AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000
MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
Go to top
Re: ACube/AEon - more info about PCIe cards in SAM440, please
Not too shy to talk
Not too shy to talk


See User information
Bummer!, too bad...I wonder if one could say sth from your debugs?

CD32/A500/A600/A600+Furia/A1200/A4000D+A2320+PiccoloSD64/Sam440 flex 800MHz RAM 1GB HD7750 128MB OS4.1 SBLive! ->
Go to top
Re: ACube/AEon - more info about PCIe cards in SAM440, please
Quite a regular
Quite a regular


See User information
@sailor

I noticed your excellent review of gfx cards in the sam440-flex.

One thing was not entirely clear from the translation. Did you test the SI cards with the dedicated warp3d-SI driver or with WaZp3D?


Go to top
Re: ACube/AEon - more info about PCIe cards in SAM440, please
Not too shy to talk
Not too shy to talk


See User information
@geennaam
thank you. Unfortunatelly I had only one Polaris card, and this one was not works. Maybe one friend lend me another one.
You very brave that you understand the google translation from Czech language - it is really not an easy task! For example "X-Ray driver" from google is very cute.

All Southern Island were tested with Warp3D-SI. WaZp3D with compositing not tested, but it is also good idea. I only test Southern Island cards both with MiniGL4GLES and MiniGL. MiniGL4GLES was a little bit faster - 43 vs. 46 FPS WingBattlefield on R9 270X.

AmigaOS3: Amiga 1200
AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000
MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
Go to top
Re: ACube/AEon - more info about PCIe cards in SAM440, please
Not too shy to talk
Not too shy to talk


See User information
hmmm, and google translator says, that I don't like Classic Amiga games on E-UAE

I like

AmigaOS3: Amiga 1200
AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000
MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
Go to top
Re: ACube/AEon - more info about PCIe cards in SAM440, please
Quite a regular
Quite a regular


See User information
@sailor

Don't bother with those polaris cards. They don't work in a sam440.

It wasn't my intention to advise WaZp3D. Just curious if you used the Warp3D-SI driver. The performance seems low. But it could be the latency issue as you mentioned.

Go to top
Re: ACube/AEon - more info about PCIe cards in SAM440, please
Not too shy to talk
Not too shy to talk


See User information
@geennaam
but anyway I will test the WaZp3D with compositing - at least on the card stayed on my Sam - R9270X.

On MorphOS I have better results on R200 cards with WaZp3D instead Warp3D. But is not comparable with AmigaOS - here is Warp3D native, and on MorphOS it is wrapped with Goa.

But comparison will be interesting too.

AmigaOS3: Amiga 1200
AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000
MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
Go to top
Re: ACube/AEon - more info about PCIe cards in SAM440, please
Home away from home
Home away from home


See User information
@geennaam
Did I understand correctly, that you use 2 adapters to be able to use RadeonHD in PCI slot ? I.e., one from PCI to PCIex1, and then on top another one from PCIex1 to PCIex16, and then, put RadeonHD into latest one ?

Maybe for pegasos2 better to use some AGP<->PCIex16 adapter (if there is any)..

Join us to improve dopus5!
AmigaOS4 on youtube
Go to top
Re: ACube/AEon - more info about PCIe cards in SAM440, please
Quite a regular
Quite a regular


See User information
@kas1e

One is an adapter the other is more an expander.

The adapter with the pericom will translate between PCI and PCIe.

The PCIe x1 to x16 is used for two reasons:
- Power inserter for the PCIe slot (up to 75W)
- be able to mount the Radeon HD inside the tower.

Go to top

  Register To Post
« 1 2 3 (4) 5 »

 




Currently Active Users Viewing This Thread: 1 ( 0 members and 1 Anonymous Users )




Powered by XOOPS 2.0 © 2001-2024 The XOOPS Project