Login
Username:

Password:

Remember me



Lost Password?

Register now!

Sections

Who's Online
57 user(s) are online (41 user(s) are browsing Forums)

Members: 0
Guests: 57

more...

Support us!

Headlines

 
  Register To Post  

« 1 (2)
Re: Problem using Sil 3132 Sata2 controller with X5000
Amigans Defender
Amigans Defender


See User information
@walkero

yes. It is. And it is well known.. Luigi Burdo has explained a lot of times the problems on X5000 and PCI devices

i'm really tired...
Go to top
Re: Problem using Sil 3132 Sata2 controller with X5000
Site Builder
Site Builder


See User information
@afxgroup
If that is the case, that means that the X5000 as sold by A-Eon, are broken.
But why this happens only with some cards and not every card?
Did Luigi Burdo shared that information anywhere, where I could have a look at?

Follow me on
Ko-fi, Twitter, YouTube, Twitch
Go to top
Re: Problem using Sil 3132 Sata2 controller with X5000
Amigans Defender
Amigans Defender


See User information
@walkero
I think you can find something here on amigans or maybe on amigaworld. But don't ask me how to find it..

i'm really tired...
Go to top
Re: Problem using Sil 3132 Sata2 controller with X5000
Just popping in
Just popping in


See User information

Go to top
Re: Problem using Sil 3132 Sata2 controller with X5000
Just popping in
Just popping in


See User information
@AlfredOne

Thank you. Two very lengthy discussions. Is it the chip, the motherboard design, UBoot, or some combination....?

This is the sort of issue I hope we can avoid with the Mirari boards. And if it ends up being a design issue with NXP chips, I at least expect Harald and Dave to be honest with us.

Go to top
Re: Problem using Sil 3132 Sata2 controller with X5000
Site Builder
Site Builder


See User information
@AlfredOne
Thank you so much for that link.

Follow me on
Ko-fi, Twitter, YouTube, Twitch
Go to top
Re: Problem using Sil 3132 Sata2 controller with X5000
Not too shy to talk
Not too shy to talk


See User information
@tao

We might need to give such a card a try in the Mirari. I have never tested this.
On the other hand..we have SATA and NVME.

AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 550 / ATI X1950 / M-Audio 5.1 -> AmigaOS 4.1 FE / Linux / MorphOS
Amiga 1200 -> Recapped / PiStorm CM4 / SD HDD / WifiPi connected to the NET
Vampire V4SE TrioBoot
RPI4 AmiKit XE
Go to top
Re: Problem using Sil 3132 Sata2 controller with X5000
Home away from home
Home away from home


See User information
@Skateman
Quote:
We might need to give such a card a try in the Mirari. I have never tested this.
On the other hand..we have SATA and NVME.
Even if those are useless on the Mirari:
Testing PCI(e) hardware known to have issues on other Amiga PPC systems, like the Sii3152 on classic Amigas (with FireStorm, Prometheus or Mediator) and on the Sam440 as well as the Sii3132 on the X5000, could help to find hardware and/or software (U-Boot) problems on the Mirari.

Go to top
Re: Problem using Sil 3132 Sata2 controller with X5000
Not too shy to talk
Not too shy to talk


See User information
@joerg

I agree, and i might order one of these cards to give it a try.
As we use a way newer Uboot version compared to the X5K machines it would still be unclear where the problem lies regarding the X5K`s .. Anwyay i would agree that testing as much hardware as possible will always benefit!

AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 550 / ATI X1950 / M-Audio 5.1 -> AmigaOS 4.1 FE / Linux / MorphOS
Amiga 1200 -> Recapped / PiStorm CM4 / SD HDD / WifiPi connected to the NET
Vampire V4SE TrioBoot
RPI4 AmiKit XE
Go to top
Re: Problem using Sil 3132 Sata2 controller with X5000
Just popping in
Just popping in


See User information
@Skateman

Since you chimed-in, I'll ask this: if Sil3132 problems do carry over to the Mirari, as NXP developers, are you entitled to their tech support? Do you have the ability to open tickets, or is that a different support tier?

Go to top
Re: Problem using Sil 3132 Sata2 controller with X5000
Not too shy to talk
Not too shy to talk


See User information
Well i do think we can we can create tickets at NXP if needed. On the other hand, asking support for a 21 year old SIL3132 chipset based budget controller might not be something they see as a high priority issue.. but again if needed we can always try.

AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 550 / ATI X1950 / M-Audio 5.1 -> AmigaOS 4.1 FE / Linux / MorphOS
Amiga 1200 -> Recapped / PiStorm CM4 / SD HDD / WifiPi connected to the NET
Vampire V4SE TrioBoot
RPI4 AmiKit XE
Go to top
Re: Problem using Sil 3132 Sata2 controller with X5000
Just popping in
Just popping in


See User information
Good to know, thanks. Yes, it makes sense that they won't get excited over one old, obscure card, but if this problem plagues one card, it probably plagues other, too. Somewhere.

Getting OT, but I wonder how many Amiga users have access to a wide range of PCI/PCie cards (maybe a friend owns a computer repair shop?) and checked them for recognition in UBoot/CFE? When you know there are drivers for only cards X, Y, and Z, I think the natural tendency is to steer away from anything else. Maybe some of the X5000 beta testers had a go?

Go to top

  Register To Post
« 1 (2)

 




Currently Active Users Viewing This Thread: 1 ( 0 members and 1 Anonymous Users )



Polls
Running AmigaOS 4 on?
AmigaOne SE/XE or microA1
Pegasos2
X5000
X1000
A1222
Sam 440/460
Classic PowerPC Amiga
WinUAE emulation
Qemu emulation
Total Votes: 177
The poll will close at 2025/12/1 12:00
4 Comments


Powered by XOOPS 2.0 © 2001-2024 The XOOPS Project