SuperTuxKart v0.8.1 bugs

on my X1000 got Guru (80000003) in single player mode about 2 laps in & managed to get crashlog which I submitted to OS4 depot

X1000 setup: Corsair GS800 800w PSU, Western Digital 250 GB SATA HDD (model:WD2500YS), 4GB Ram, Radeon HD7950-3GB GDDR5- Dual Slot, Lite-On RW DVD/CD, On-Board Nemo sound,8139B NIC, Catweasel MK4+

@328gts
Checked crash log and can see in stack trace it crashes in ogles2.library. Do you have ogles2.library.debug installed as well? and if so, can you replace for time being ogles2.library by that ogles2.library.debug, and try to get again that crash, and show me stack trace (not full log, but just stack trace will enough, so we will see in which function in ogles2 it crashes).

Also is it always reproducible on your side? Is crash skippable?

If you don't have ogles2.library.debug, I can send you one, but first, check if you didn't.

@All
Is anyone else have that crash too?

@kas1e

No problem so far with X1000 and RadeonHD R7250 (HD 7770).

@kas1e

out of town returning home later today so will check & get back to you.

The bug was consistent 3 times of trying...2 times it was skippable & 3rd time it crashed system.

@328gts
When you will back home, and things still will be reproducible on your side, then I can send you ogles2.lirbary debug, so we can see a stack trace.

But first try it after power off, etc.

@kas1e

PM sent.

@328gts

Replied! Made a crash log then :)

@kas1e

done & emailed over to you

Something strange. Before it points out on ogles2.library, now in the crash log you send me stack trace flawed, nothing shown and just point out on intuition:




Can you try again and again, till the crash log will have ogles trace again inside with some numbers to the strings?

Also when you crash, didn't you have in console something like "Invalid FBO Attachment"?

I keep getting an error regarding a agregated texture file. Grass.jpg

I made a video where you can see the error. Not a big issue but i guess its fixable You can see it when i start racing around 1:25

https://www.youtube.com/watch?v=OKp1hvCae-8

Hope this helps.

@Skateman
That one harmless, same as on win32 version. Devs answer before on their forum to someone who ask about it back in past that all ok, and no worry.

@kas1e

Thanks a lot!

Great work!

@outrun1978
About joystick stuff now:

I checked hcraft, a night of the zombies and supertuxkart: it seems only supertuxkart use it properly. Night of the zombies seems didn't use joysticks at all, HCraft seems to use, but it seems they use some their own joystick's code which can be win32 only (dunno, didn't check that part).

So, only supertuxkart probably. I build it with fixed SDL, check it plz:

http://kas1e.mikendezign.com/aos4/gl4 ... tuxkart_with_joystick.zip

If all fine will update later archive on os4depot, only we understand what happens on 328gts's machine.

@kas1e

All working fine and Joypads are recognised
Many thanks for sorting this one out and all your hard work!

@kas1e

ok sent off stack trace and carsh log again just now.

I have yet to complete a lap without my X1000 throwing a guru so I can send you these every single time I play v0.8.1

@outrun1978
Quote:

Good! Can you also tri HCRAFT ? It also have joystick support, but not irrlicht's one , but their own (through SDL1 as well). I can't make my half-working gamepads works in, but maybe on your side it will works ? Check this out plz:

http://kas1e.mikendezign.com/aos4/gl4 ... craft/hcraft_joystick.zip

@328gts

In the new one, you have at least a crash in ogles2.library and this time with a stack trace, so I forwarded it to Daniel. Through very strange that it only you have that issue (other ones with x1000 seems didn't ?) And it crashes for you in some memory function, so maybe something with your memory? Are all the other games never crash for you? I mean ogles2 ones.

If no one else able to reproduce it ever on their x1000, then my bet it can be something with your memory (ram one, or maybe gpu one, dunno). But if at least one of the other can reproduce it, it can be then indeed issue with code.

@Kas1e

Joypads and joysticks are now supported in H-Craft but to some mixed results. I am unable to attach left and right to anything other than a button

On using a Competition Pro Joystick, for example this renders the game really uncontrollable.

On a Xeox Xbox360 style pad or a Logitech F-310 (Playstaion style) you can only attach the left and right to one of the buttons and it makes sense to put the left and right on one of the trigger buttons or top buttons for left and right, but it does feel a little un-natural and impacts on gameplay in my opinion.

it would be nice if the analogue stick or the hat switches moved the craft left and right

Let me know if you need to test anything else and thanks for looking into this so far

@outrun1978
Replied in HCraft bug-thread, so to keep that one about supertuxkart

@kas1e

Thanks for adding controller support, my Logitech F310 works fine here... framerate though drops when lots of things ongoing on screen (like couple of bowling balls rolling).

My setup x5000 + R9 280x, I'm so happy to have SuperTuxKart and H-Craft now, I can finally give Voxel Bird a rest ;)

@Tohe, outrun1978

Btw, when you set up actions in SuperTukKart controller, all fine ? For me, its automatically always want to choose some AXE, and i need to press need it button fast-fast so it will be chosen on necessary action. Probably related to my cheep gamepad itself (it have some issues in amigainput , when auto-doing things).

For you both all fine, you just choice action to choice, and it wait till you not press necessary one ?