Login
Username:

Password:

Remember me



Lost Password?

Register now!

Sections

Who's Online
37 user(s) are online (23 user(s) are browsing Forums)

Members: 2
Guests: 35

Templario, trixie, more...

Headlines

 
  Register To Post  

Shutdown>Restart OS issue (X5000) (SOLVED)
Quite a regular
Quite a regular


See User information
On my X5000 I can no longer use the Shutdown>Retart Amiga OS feature.

My X5000 came installed with AOS4FEU2; the issue was present even then. I wanted a clean install from scratch for myself anyway. As I built up the install I tested this feature at various times and it worked. Even after installing the enhancer 2.1 files / radeonRX and installing the RX card it all worked.

All I know is that in the last few hours I have made some GUI/Workbench prefs tweaks and that I have installed the Z-TOOLS. Now, when I try to "restart AmigaOS" I just get a black screen saying that there is no input.

There seems to be some issue here that does not happen on my X1000 and I am not sure what it is.

What is the equivalent command to "Shutdown>Restart AmigaOS" that I can run from shell and/or can I get any serial output when I try this.

Trying to figure this one out.


Edited by rjd324 on 2022/4/18 21:52:05
Edited by rjd324 on 2022/6/27 17:39:10
Edited by rjd324 on 2022/6/28 17:21:27
If liberty means anything at all, it means the right to tell people what they do not want to hear.
George Orwell.
Go to top
Re: Shutdown>Restart OS issue (X5000)
Quite a regular
Quite a regular


See User information
Okay,

reboot fast


is the equivalent command.

I really do not want to spend another half a day installing things one by one to figure out where the conflict is. Let's just see if I get anyone else having encountered the same issue before I force myself to do that. Not having this ability will get annoying, quick.

If liberty means anything at all, it means the right to tell people what they do not want to hear.
George Orwell.
Go to top
Re: Shutdown>Restart OS issue (X5000)
Just popping in
Just popping in


See User information
@rjd324

It's an issue with the RX cards..
They don't respond to a soft reset!

Go to top
Re: Shutdown>Restart OS issue (X5000)
Home away from home
Home away from home


See User information
@rjd324
Quote:

On my X5000 I can no longer use the Shutdown>Retart Amiga OS feature.


Hans explain everywhere many times (but that maybe be missed of course) that newer gfx cards is not designed to have soft resets at all, and he tried all possible stuff he can think of without success. If i remember right even with RadeonHD it was kind of "luck" but not more than that.

In other words new cards mean no soft reboot for us anymore. Theoreticaly some devs says it possible, but the only one who working on drivers are Hans, and he tols that from his pov and skills is unpossible.

Join us to improve dopus5!
AmigaOS4 on youtube
Go to top
Re: Shutdown>Restart OS issue (X5000)
Just can't stay away
Just can't stay away


See User information
@rjd324

Use Shutdown->Restart computer instead.

The Rear Window blog

AmigaOne X5000 @ 2GHz / 4GB RAM / Radeon RX 560 / ESI Juli@ / AmigaOS 4.1 Final Edition
SAM440ep-flex @ 667MHz / 1GB RAM / Radeon 9250 / AmigaOS 4.1 Final Edition
Go to top
Re: Shutdown>Restart OS issue (X5000)
Quite a regular
Quite a regular


See User information
That's all I needed guys. Thanks for the input. I'll mark it as solved.

If liberty means anything at all, it means the right to tell people what they do not want to hear.
George Orwell.
Go to top
Re: Shutdown>Restart OS issue (X5000)
Quite a regular
Quite a regular


See User information
I get different behaviour between:

1 - Choosing Shutdown->Restart Computer
vs
2 - Cntrl+LAmiga+RAmiga.

1 works okay,
but 2 will just restart with a black screen and no output. Here is the relevant part of the serial log with debuglevel 20 (no debug kernel):
LAW0F_E0000000 Size 10000 Tgt eLBC (0x81F0000F)
LAW1F_E1000000 Size 1000 Tgt eLBC (0x81F0000B)
LAW2F_F4000000 Size 200000 Tgt Buffer manager (0x81800014)
LAW3F_F4200000 Size 200000 Tgt Queue manager (0x83C00014)
LAW4F_00000000 Size 2000000 Tgt DCSR (0x81D00018)
LAW5C_00000000 Size 20000000 Tgt PCI Express 1 (0x8000001C)
LAW6F_F8000000 Size 10000 Tgt PCI Express 1 (0x8000000F)
LAW7C_20000000 Size 20000000 Tgt PCI Express 2 (0x8010001C)
LAW8F_F8010000 Size 10000 Tgt PCI Express 2 (0x8010000F)
LAW310_00000000 Size 0 Tgt Memory complex 1 (0x8100001F)
msr0x00003030
TLB1 
(64 entries):
 * [ 
52]: size=7 tid 0 TS 1 epn=0xFE000000 rpn=0x0000000F_FE000000 WIMG=0x5 
XXWWRR
=0xF protected
 * [ 
53]: size=6 tid 0 TS 1 epn=0x01000000 rpn=0x00000000_01000000 WIMG=0x0 
XXWWRR
=0x5 protected
 * [ 
54]: size=6 tid 0 TS 1 epn=0x01400000 rpn=0x00000000_01400000 WIMG=0x0 
XXWWRR
=0x5 protected
 * [ 
55]: size=6 tid 0 TS 1 epn=0x01800000 rpn=0x00000000_01800000 WIMG=0x0 
XXWWRR
=0x33 protected
 * [ 
56]: size=6 tid 0 TS 1 epn=0x01C00000 rpn=0x00000000_01C00000 WIMG=0x0 
XXWWRR
=0x33 protected
 * [ 
57]: size=6 tid 0 TS 1 epn=0x02000000 rpn=0x00000000_02000000 WIMG=0x0 
XXWWRR
=0xF protected
 * [ 
58]: size=4 tid 0 TS 1 epn=0x02400000 rpn=0x00000000_02400000 WIMG=0x0 
XXWWRR
=0xF protected
 * [ 
59]: size=3 tid 0 TS 1 epn=0x02440000 rpn=0x00000000_02440000 WIMG=0x0 
XXWWRR
=0xF protected
 * [ 
60]: size=3 tid 0 TS 1 epn=0x02450000 rpn=0x00000000_02450000 WIMG=0x0 
XXWWRR
=0xF protected
 * [ 
61]: size=7 tid 0 TS 0 epn=0xFE000000 rpn=0x0000000F_FE000000 WIMG=0x5 
XXWWRR
=0xF protected
 * [ 
62]: size=A tid 0 TS 0 epn=0x00000000 rpn=0x00000000_00000000 WIMG=0x0 
XXWWRR
=0x3F protected
 * [ 
63]: size=A tid 0 TS 0 epn=0x40000000 rpn=0x00000000_40000000 WIMG=0x0 
XXWWRR
=0x3F protected
HAL_MaxTLB 51HAL_NextTLB 0
MMUCFG 
0x064809C4
mas0 
0x103F0000
mas1 
0xC0000A00
mas2 
0x40000000
mas3 
0x4000003F
mas4 
0x00000100
mas5 
0x00000000
mas6 
0x00000001
mas7 
0x00000000
mas8 
0x00000000
RadeonRX 
(2): Identified the chipset as: POLARIS11
RadeonRX 
(2): Graphics card name isRadeon RX Polaris11
RadeonRX 
(2):        If - and only if - your card does not work or does not work
 optimally
       please submit a bug report at
:
       
http://www.amiga.org/developer/bugreports 
       
Remember to include the driver version, and the following card details:
       
0x67FF:0x1DA2:0xE348: <name of board>
       and *
pleasedescribe the problems you are seeing in detail.
[
EHCI] *usbbase=FE210100
[EHCI] *usbbase=FE211100
graphics
.library P50XX optimizations enabled
RadeonRX 
(0): RadeonRX.chip 2.8 (19.8.2021)
RadeonRX (2): Identified the chipset as: POLARIS11
RadeonRX 
(2): Graphics card name isRadeon RX Polaris11
RadeonRX 
(2):        If - and only if - your card does not work or does not work
 optimally
       please submit a bug report at
:
       
http://www.amiga.org/developer/bugreports 
       
Remember to include the driver version, and the following card details:
       
0x67FF:0x1DA2:0xE348: <name of board>
       and *
pleasedescribe the problems you are seeing in detail.
RadeonRX (0): KCQ enable failed (scratch(0xC040)=0xCAFEDEAD)
RadeonRX (0): hw_init of IP block <gfx_v8_0failed -22
graphics
.library cannot configure your graphics board!
Either your board is not supported or there's a configuration problem.
Did you install PCIGraphics.kmod?


Quote:

Did you install PCIGraphics.kmod?

I have no such thing in my SYS:kickstart/

My kicklayout:
$VERKicklayout-AmigaOneX5000 53.10 (24.10.2016)
;
Kernel configuration for the AmigaOne X5000 from A-EON Technology Ltd
;
This file describes how the "Kickstart" image should look like,
i.eit describes which modules should be pre-loaded and available
at boot time.
;
;
Format:
; ~~~~~~
The file lists one or more configurations.
;
Each configuration starts with the LABEL keywordfollowed by the
name of the configuration.  The name can be used to specify the
configuration in the bootloader tool (see Documentation/kernel/
bootloader.txt). Note that empty lines end one configuration and
start the nextwhich means that you must be careful not to leave
an empty line anywhere unless you are defining multiple configurations.
;
Each configuration must have exactly one line with the EXEC keyword.
This specifies the filename of the main kernel to use. This kernel is
the absolute minimum required to bootIt containsamong other things,
exec.library.
;
The following lines define additional modules to be loaded into the
kickstart imageEach of these lines starts with the MODULE keyword
followed by the filename of the module.
;
;
;
Configuration name
LABEL AmigaOS 4.1 
Final Edition
EXEC Kickstart
/loader
;MODULE Kickstart/kernel.debug
MODULE Kickstart
/kernel
;
MODULE Kickstart/FastFileSystem
MODULE Kickstart
/CDFileSystem
MODULE Kickstart
/NGFileSystem
;
MODULE Kickstart/battclock.resource.kmod
MODULE Kickstart
/bootmenu.kmod
MODULE Kickstart
/bootimage
MODULE Kickstart
/bootsd.resource.kmod
MODULE Kickstart
/con-handler.kmod
MODULE Kickstart
/console.device.kmod
MODULE Kickstart
/dos.library.kmod
MODULE Kickstart
/diskboot.kmod
MODULE Kickstart
/diskboot.config
MODULE Kickstart
/elf.library.kmod
MODULE Kickstart
/env-handler.kmod
MODULE Kickstart
/FileSystem.resource.kmod
MODULE Kickstart
/gadtools.library.kmod
MODULE Kickstart
/hunk.library.kmod
MODULE Kickstart
/input.device.kmod
MODULE Kickstart
/intuition.library.kmod
MODULE Kickstart
/keyboard.device.kmod
MODULE Kickstart
/keymap.library.kmod
MODULE Kickstart
/mounter.library
MODULE Kickstart
/newlib.library.kmod
MODULE Kickstart
/nonvolatile.library.kmod
MODULE Kickstart
/petunia.library.kmod
MODULE Kickstart
/ram-handler.kmod
MODULE Kickstart
/ramdrive.device.kmod
MODULE Kickstart
/ramlib.kmod
MODULE Kickstart
/shell.kmod
MODULE Kickstart
/strap.kmod
MODULE Kickstart
/timer.device.kmod
;
MODULE Kickstart/graphics.library.kmod
MODULE Kickstart
/PCIGraphics.card
MODULE Kickstart
/RadeonHD.chip
MODULE Kickstart
/RadeonRX.chip
MODULE Kickstart
/ATIRadeon.chip
MODULE Kickstart
/3DLabsPermedia2.chip
MODULE Kickstart
/3dfxVoodoo.chip
;
MODULE Kickstart/p50x0sata.device.kmod
MODULE Kickstart
/sii3112ide.device.kmod
MODULE Kickstart
/sii3114ide.device.kmod
MODULE Kickstart
/sii3512ide.device.kmod
MODULE Kickstart
/sii0680ide.device.kmod
MODULE Kickstart
/lsi53c8xx.device.kmod
MODULE Kickstart
/it8212ide.device.kmod
;
MODULE Kickstart/usbresource.library
MODULE Kickstart
/usbsys.device
MODULE Kickstart
/bootmouse.usbfd
MODULE Kickstart
/bootkeyboard.usbfd
MODULE Kickstart
/hub.usbfd
MODULE Kickstart
/massstorage.usbfd
MODULE Kickstart
/uhci.usbhcd
MODULE Kickstart
/ohci.usbhcd
MODULE Kickstart
/ehci.usbhcd
MODULE Kickstart
/xena.resource.kmod


My SYS:Storage/Monitors:
-rwx------  1 root wheel 6560 2014-10-08 18:06 Radeon HD 5450
-rw-------  1 root wheel 9828 2022-04-17 20:04 Radeon HD 5450.info
-rwx------  1 root wheel 6560 2014-10-08 18:38 RTG
-rw-------  1 root wheel 9559 2014-10-08 18:38 RTG.info
-rwx------  1 root wheel 6560 2014-10-08 18:06 VooDoo
-rw-------  1 root wheel 9819 2022-04-17 20:04 VooDoo.info


The "Radeon HD 5450" Icon Information:
CMPLENGTH=14
BOARDTYPE
=Radeon HD 5450
(DDCMODE=ALL)
VSYNCMIN=60
VSYNCMAX
=70
HSYNCMIN
=31000
HSYNCMAX
=70000
MODE
=640x480@60
MODE
=800x600@60
MODE
=1024x768@60
MODE
=1280x720@60
MODE
=1280x800@60
MODE
=1280x960@60
MODE
=1280x1024@60
MODE
=1440x900@60
MODE
=1600x900@60
MODE
=1600x1200@60
MODE
=1680x1050@60
MODE
=1920x1080@60
MODE
=1920x1200@60
(FAKENATIVEMODES=Yes)
INTERRUPT=Yes


I never changed the name of this icon. Actually, I am running a 560 RX Polaris 11.

I also have "AmigaKeyRemapper" running to swap functionality of L and R Amiga keys.

If liberty means anything at all, it means the right to tell people what they do not want to hear.
George Orwell.
Go to top
Re: Shutdown>Restart OS issue (X5000)
Just can't stay away
Just can't stay away


See User information
Quote:
Quote:

Did you install PCIGraphics.kmod?

I have no such thing in my SYS:kickstart/


For PCIGraphics.kmod, read PCIGraphics.card.

Best regards,

Niels

Go to top
Re: Shutdown>Restart OS issue (X5000)
Quite a regular
Quite a regular


See User information
@nbache

Thanks. Well, that is in the kicklayout file.

If liberty means anything at all, it means the right to tell people what they do not want to hear.
George Orwell.
Go to top
Re: Shutdown>Restart OS issue (X5000)
Quite a regular
Quite a regular


See User information
https://www.amigans.net/modules/newbb/ ... t_id=65468#forumpost65468

It probably makes sense. I forgot about the difference between the Amiga and Alt keys.

If liberty means anything at all, it means the right to tell people what they do not want to hear.
George Orwell.
Go to top

  Register To Post

 




Currently Active Users Viewing This Thread: 1 ( 0 members and 1 Anonymous Users )




Powered by XOOPS 2.0 © 2001-2023 The XOOPS Project