Login
Username:

Password:

Remember me



Lost Password?

Register now!

Sections

Who's Online
68 user(s) are online (51 user(s) are browsing Forums)

Members: 0
Guests: 68

more...

Headlines

 
  Register To Post  

« 1 (2) 3 »
Re: HCraft crash
Just popping in
Just popping in


See User information
@kas1e

Go for it 😉 and probably best to attach in the update notes the suggested joypad control settings.

Tested with a Logitech F-310, Xeox SL6556 and 8bitdo SFC-30 pads

Amigaone X5000 AmigaOS 4.1 Final Edition Update 1
Radeon RX 550 Polaris
Go to top
Re: HCraft crash
Home away from home
Home away from home


See User information
@outrun1978
I was lucky enough to somehow make one of my gamepads works, and I see what you mean: yeah, on the first look its a bit unlogical, that you can't set Axis for the non-analog actions, but if you thinking more about its right :)

At the top you have 3 entries :

Analog Steering
Analog Acceleration
Analog Brake

The first one "Analog Steering", mean left/right action. If you choose there "left" on your gamepad, then "left and right" in the game to control hover will work as expected. If you choose there "right", then "left/right" in the game will be swapped. So there when you set up controller's actions you press "left".

Now "Analog Acceleration" it's for "up" (but you can not use it of course), and "Analog Break" is for "down" (which you also can no use).

Next, you just choice buttons for pure "accelerate" (which you will use to accelerate actually, as it will be easier than with "up" while you pressing "left/right". And then for a break, pause, view mode, and co).

And in end all pretty good. You can use brake/accelerate from both, and via "up/down" and via buttons, just how you feel it better (for me better accelerate by button, but brake by "down")

Just sure, the first entry "Analog steering" a bit confusing as it choice left/right at the same time, but its probably logical in terms of all those controller devices :)

So yeah probably that need to be noted in the readme of update.

With this info is it easier to set up now Analog one too?

Join us to improve dopus5!
AmigaOS4 on youtube
Go to top
Re: HCraft crash
Just popping in
Just popping in


See User information
@Kas1e

Yes your suggestion has worked a treat and the Analog stick now works It makes a big difference to the gameplay too!!

Thanks for that!

Amigaone X5000 AmigaOS 4.1 Final Edition Update 1
Radeon RX 550 Polaris
Go to top
Re: HCraft crash
Home away from home
Home away from home


See User information
@kas1e

just tried running HCraft and unlike the new SuperTuxKart I get an immediate crash at startup....sent over the stack trace and crash log to you just now

_______________________________
c64-dual sids, A1000, A1200-060@50, A4000-CSMKIII
Catweasel MK4+= Amazing
! My Master Miggies-Amiga1000 & AmigaONE X1000 !
mancave-ramblings

Go to top
Re: HCraft crash
Just can't stay away
Just can't stay away


See User information
@328gts

Did you read the thread or did just come and post at the very end without reading all that has been written ?

@Kas1e

It's ok witth the debug3 version ! Thanks !

--
AmigaONE X1000 and Radeon RX 560
Go to top
Re: HCraft crash
Home away from home
Home away from home


See User information
@K-L

guilty but 'someone' hi-jacked my SuperTuxKart thread so now we're even

_______________________________
c64-dual sids, A1000, A1200-060@50, A4000-CSMKIII
Catweasel MK4+= Amazing
! My Master Miggies-Amiga1000 & AmigaONE X1000 !
mancave-ramblings

Go to top
Re: HCraft crash
Home away from home
Home away from home


See User information
@K-L
Oh, that good! Thanks for tests! With SuperTuxKart you have no single crash, even if you play a lot, right?

@328gts
Yeah, as K-L says just try:
http://kas1e.mikendezign.com/aos4/gl4 ... /hcraft/hcraft_debug3.zip

That one has it fixed and also has joystick support.


@all
Will update os4depot with new version today





Join us to improve dopus5!
AmigaOS4 on youtube
Go to top
Re: HCraft crash
Just can't stay away
Just can't stay away


See User information
@328gts

Hey, I'm not the one who hijacked your thread

--
AmigaONE X1000 and Radeon RX 560
Go to top
Re: HCraft crash
Home away from home
Home away from home


See User information
@kas1e

indeed working great with debug version and very fun game!

@ K-L

I know but we're all friends here so a toast to all for a happy 2020

_______________________________
c64-dual sids, A1000, A1200-060@50, A4000-CSMKIII
Catweasel MK4+= Amazing
! My Master Miggies-Amiga1000 & AmigaONE X1000 !
mancave-ramblings

Go to top
Re: HCraft crash
Home away from home
Home away from home


See User information
@All
Uploaded new version of HCraft to os4depot (in upload query):

-- enabled joystick support (see notes above)
-- get rid of -lunix and replaced all remain paths on amigaos4 native ones
-- fixed to make it works on public versions of dos.library

@Skateman

Added to the readme that part so hopefully it will clear things:

Quote:

... Joystick support ...

For first you need working and calibrated joystick/gamepad in AmigaInput. Then in the game, in the "Options/Controller Setup", you set up your axis and buttons.
There is one thing that needs to mention: first entry "Analog Steering" can be somehow confusing as it set for you both the "left" and the "right" on the axis at the same time.
You press there "left", and it will set for you correctly "left" and "right". If you press "right", then "left" and "right" will be swapped.

Next you choice "Analog Acceleration" (can be "Up"), and "Analog Brake" (can be "Down"). But you of course not forced to use it for Acceleration/Break, because below in
Controller's Setup you can attach those actions on the Buttons too.


@K-L
As that thread is already about everything, can you check also new NeverBall and Foobillard, I remember you say that never ball works from HDD on x1000 somehow strange, and Foobillard also wasn't very fluid. With new versions, at least Foobillard should be fluid, and maybe NeverBall is ok too now?

Join us to improve dopus5!
AmigaOS4 on youtube
Go to top
Re: HCraft crash
Just can't stay away
Just can't stay away


See User information
@kas1

Foobillard : no problema at all.

Neverball : same problem : jerky (less than before) but even in RAM: it is jerky (whatever resolution I choose or whatver display option I try).

--
AmigaONE X1000 and Radeon RX 560
Go to top
Re: HCraft crash
Home away from home
Home away from home


See User information
@K-L
Thanks! So the remaining problem from all those ports its to understand why on x1000 there issues with Neverball.

Join us to improve dopus5!
AmigaOS4 on youtube
Go to top
Re: HCraft crash
Just popping in
Just popping in


See User information
@All
PS4 Controller work in H-craft with usb cable. good work

AaaamiiigaOne X5000
(AmigaOS 4.1 FE)
Go to top
Re: HCraft crash
Home away from home
Home away from home


See User information
@kas1e

I wonder...did you ever try to compile Barony without the newlib workaround and check if update2 newlib fixed it?

People are dying.
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg
Go to top
Re: HCraft crash
Just can't stay away
Just can't stay away


See User information
@kas1e

Just tested Neverball on my X1000. Jerkiness persists. Odd because Neverputt runs fine.

AmigaOne X1000.
Radeon RX550

http://www.tinylife.org.uk/
Go to top
Re: HCraft crash
Home away from home
Home away from home


See User information
@Raziel
Nope, didn't try as the workaround works fine enough. Or you mean just to check if newlib deals with? But sure it deals with, as previous, i tested it exactly on the beta of newlib, and making workaround only for public versions

@ddni
I didn't touched neverball since, but if someone can sold me x1000, i will be happy to test it more :)

Join us to improve dopus5!
AmigaOS4 on youtube
Go to top
Re: HCraft crash
Home away from home
Home away from home


See User information
@kas1e

Quote:

Or you mean just to check if newlib deals with? But sure it deals with, as previous, i tested it exactly on the beta of newlib, and making workaround only for public versions

Yes, exactly that.

Thank you for confirming

People are dying.
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg
Go to top
Re: HCraft crash
Just can't stay away
Just can't stay away


See User information
@kas1e

Quote:
@ddni
I didn't touched neverball since, but if someone can sold me x1000, i will be happy to test it more :)


LOL, yes I will sell you my X1000 for One Million Dollars :)

The Neverball jerkiness is very odd, the framerate looks good, just a very regular hitching every half second. This hitching is not seen on Neverball 1.5.4

AmigaOne X1000.
Radeon RX550

http://www.tinylife.org.uk/
Go to top
Re: HCraft crash
Home away from home
Home away from home


See User information
@ddni

I just downloaded the two games and quickly tested the first level.

I don't see any jerkiness (default settings), window, cpu is at 95%

Do you use any special settings?

People are dying.
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg
Go to top
Re: HCraft crash
Just can't stay away
Just can't stay away


See User information
@Raziel

I tried with all bells and whisltes on & off, lower resolution, full screen/window. All had the hitching.

I will try a reinstall.

Edit: Delete all and reinstall, jerkiness fixed. :)


Edited by ddni on 2021/4/27 22:50:17
AmigaOne X1000.
Radeon RX550

http://www.tinylife.org.uk/
Go to top

  Register To Post
« 1 (2) 3 »

 




Currently Active Users Viewing This Thread: 2 ( 0 members and 2 Anonymous Users )




Powered by XOOPS 2.0 © 2001-2023 The XOOPS Project