QEMU GPU-PCIe AmigaONE

UBUNTU STUDIO

I downloaded 25.04
But also 24.04.2 LTS

For the rest the graphics packages and everything else can always be removed.

I read this maybe it is useful for the purpose:

“Configure Current Audio Configuration” takes you to the screen that allows you to configure the PipeWire Quantum, or (24.04 LTS only) lets you launch Studio Controls if using PulseAudio/JACK*.
24.10 and later only: “Change Kernel Boot Parameters” allows you to change the boot parameters that configure the kernel to be low-latency**.
“START|STOP Dummy Audio Device” Starts or stops the dummy audio device, or allows you to have it start or stop on login.
“DISABLE|ENABLE PipeWire-JACK” allows advanced users to use native JACKd2 via QJackControl.
24.04 Only: “Switch Configuration” installs the classic PulseAudio/JACK configuration and removes the PipeWire Audio configuration, or does the reverse depending on what is installed.*

@balaton

The OP obviously

@white you seem to have completely misunderstood my message

@NinjaCyborg

probably yes, it can happen
If you ask me the question again, I'd be happy to read.

@white
If we can't prove to you that the problem is with your system configuration, isn't it simpler to ask the Linux support forum?
You are currently using Ubuntu. This is a very popular distribution. Many people use QEMU X86_64 with qemu passthru for Windows emulation.
They may even have the same hardware as you and use ‘sudo’
Please ask them for help ... thank you

@smarkusg

Thanks for the advice,
You see a few years ago I needed to reflect.

So I decided to go to Spain and I did the "Camino for Santiago".
It was a particular experience difficult to explain.

Of course there is also in Italy a "The Camino di San Francesco in a city called Assisi"

The purpose is identical, it serves to reflect.

Less famous than the French-Spanish one.
But still important.

For you instead I would always recommend Spain, Pamplona
The Running of the Bulls starts in July.

I think you should go there, get informed maybe you will find your way.

Thanks...

----------------------------------------------
note:
I'm getting a better understanding of how pipewire works,
so I think I'll stick with the current Ubuntu 25.4

This script should help with switching audio but I have yet to try it.
-----------------------------------------------
#!/bin/bash

if [ "$1" == "pipewire" ]; then
echo "Switching to PipeWire..."
systemctl --user stop pulseaudio
systemctl --user disable pulseaudio
systemctl --user enable pipewire
systemctl --user enable wireplumber
systemctl --user start pipewire
systemctl --user start wireplumber
echo "Switched to PipeWire."

elif [ "$1" == "pulseaudio" ]; then
echo "Switching to PulseAudio..."
systemctl --user stop pipewire
systemctl --user stop wireplumber
systemctl --user disable pipewire
systemctl --user disable wireplumber
systemctl --user enable pulseaudio
systemctl --user start pulseaudio
echo "Switched to PulseAudio."

else
echo "Usage: $0 [pipewire|pulseaudio]"
echo "Specify 'pipewire' or 'pulseaudio' to switch between them."
fi

Here I emulated with Virt-Manager KVM with a single GPU with an Ryzen 5800x processor now 5 years ago.
Using a geforce 970.

Amilator a LIVE distribution with FS-UAE with AmigaOS 4.1 in this case I used Kali-Linux

I still have the Amilator iso based on Debian.
The author still maintains his project.
EX Amilator
https://amiga.vk3heg.net/

I wonder if the project could be adapted to qemu once I fix the audio in my setup
With a LIVE stick

Of course it is possible to emulate any AmigaOS system even the classic ones.

Here a nice video I made to understand what it is about for those who do not know the project.

https://youtu.be/tIteEp40txw

I really can't figure out the cause of the audio this only happens with the activation of the RadeonHD.chip driver

as soon as I initialize RadeonHD.chip
here come the errors:
alsa: Could not initialize DAC
alsa: Failed to open `default':
alsa: Reason: The host is not active
alsa: Could not initialize DAC
alsa: Failed to open `default':
alsa: Reason: The host is not active
audio: Could not create a backend for voice `via-ac97.out'

the switch-audio.sh script works fine
-----------------------------------------------------------------
#!/bin/bash

if [ "$1" == "pipewire" ]; then
echo "Switching to PipeWire..."
systemctl --user stop pulseaudio
systemctl --user disable pulseaudio
systemctl --user enable pipewire
systemctl --user enable wireplumber
systemctl --user start pipewire
systemctl --user start wireplumber
echo "Switched to PipeWire."

elif [ "$1" == "pulseaudio" ]; then
echo "Switching to PulseAudio..."
systemctl --user stop pipewire
systemctl --user stop wireplumber
systemctl --user disable pipewire
systemctl --user disable wireplumber
systemctl --user enable pulseaudio
systemctl --user start pulseaudio
echo "Switched to PulseAudio."

else
echo "Usage: $0 [pipewire|pulseaudio]"
echo "Specify 'pipewire' or 'pulseaudio' to switch between them."
fi
-----------------------------------------------------------------


systemctl --user status pipewire-pulse :

○ pipewire-pulse.service - PipeWire PulseAudio
Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.service; enabled; preset: enabled)
Active: inactive (dead) since Mon 2025-05-19 06:44:12 CEST; 6min ago
Duration: 2min 21.287s
Invocation: 55355049d1e845079a5eb8103987fa15
TriggeredBy: ○ pipewire-pulse.socket
Main PID: 3101 (code=exited, status=0/SUCCESS)
Mem peak: 3.2M
CPU: 19ms

May 19 06:41:51 systemd emulation[3080]: Started pipewire-pulse.service - PipeWire PulseAudio.
May 19 06:44:12 systemd emulation[3080]: Stopping pipewire-pulse.service - PipeWire PulseAudio...
May 19 06:44:12 systemd emulation[3080]: Stopped pipewire-pulse.service - PipeWire PulseAudio.

running the ./switch-audio.sh pulseaudio script

Stopping 'pipewire.service', but its triggering units are still active:
pipewire.socket
Removed '/home/white/.config/systemd/user/sockets.target.wants/pipewire.socket'.
Removed '/home/white/.config/systemd/user/default.target.wants/pipewire.service'.
Disabling 'pipewire.service', but its triggering units are still active:
pipewire.socket
The following unit files have been enabled in global scope. This means
they will still be started automatically after a successful disablement
in user scope:
pipewire.service
Removed '/home/white/.config/systemd/user/pipewire.service.wants/wireplumber.service'.
The following unit files have been enabled in global scope. This means
they will still be started automatically after a successful disablement
in user scope:
wireplumber.service
Created symlink '/home/white/.config/systemd/user/default.target.wants/pulseaudio.service' → '/usr/lib/systemd/user/pulseaudio.service'.
Created symlink '/home/white/.config/systemd/user/sockets.target.wants/pulseaudio.socket' → '/usr/lib/systemd/user/pulseaudio.socket'.
Switched to PulseAudio.


./switch-audio.sh pipewire

Switching to PipeWire...
Stopping 'pulseaudio.service', but its triggering units are still active:
pulseaudio.socket
Removed '/home/white/.config/systemd/user/sockets.target.wants/pulseaudio.socket'.
Removed '/home/white/.config/systemd/user/default.target.wants/pulseaudio.service'.
Disabling 'pulseaudio.service', but its triggering units are still active:
pulseaudio.socket
The following unit files have been enabled in global scope. This means
they will still be started automatically after a successful disablement
in user scope:
pulseaudio.service
Created symlink '/home/white/.config/systemd/user/default.target.wants/pipewire.service' → '/usr/lib/systemd/user/pipewire.service'.
Created symlink '/home/white/.config/systemd/user/sockets.target.wants/pipewire.socket' → '/usr/lib/systemd/user/pipewire.socket'.
Created symlink '/home/white/.config/systemd/user/pipewire.service.wants/wireplumber.service' → '/usr/lib/systemd/user/wireplumber.service'.
Switched to PipeWire.

note:

I don't think it's due to the Ubuntu 25.4 installation phase when it asks if you want to choose proprietary drivers or not.

Otherwise, everything I do with Ubuntu works.

I'll try to create some virtual machines with Virt-Manager and see what happens.

Now I had to do the backup and it took me a bit of time.


Aanyway I ordered exactly the card

Asus Radeon R9 270X DirectCU II TOP
2 GB GDDR5 memory

https://www.techpowerup.com/gpu-specs/ ... 70x-directcu-ii-top.b2450

Identical to the one used by other users.
if it doesn't work, patience I'll give up

I'll move on to something else

I also tried this test in the hope that it would work and it worked.
I took my HD.raw file with AmigaONE perfectly working with SiliconMotion the audio is perfectly working.

And I simply took the RadeonHD.chip driver
and renamed it to SiliconMotion.chip

Upon reboot I could select the 32Bit screen with SiliconMotion.
But the audio stopped working.
So it is the RadeonHD.chip driver that conflicts with the audio.

This is my simple report.

I hope it is the graphics card that for some reason creates this problem now I will wait for the:

Asus Radeon R9 270X DirectCU II TOP
2 GB GDDR5 memory

then I will stop I promise

now it's clear that it's a paradoxical situation if I talk about AmigaOS on a Linux forum they probably won't be of much help.
Especially with qemu that emulates AmigaONE.
That's all.

So whoever wants to answer me I'm here and I thank you.
But tell me you're wrong these are the .logs that prove the opposite. Thanks

So I'm simply looking for a solution.
And since we are few to do this experiment what can I say.
Everyone do their own work.
At this point forums are not much use if used in this way.
My respect goes to all those who participate in this forum.

But instead of helping me I only hear you're wrong so I feel bad.
That's all.



also used this script for ALSA:
./alsa-info_alsa-info.sh

which returns this without showing everything because it is too long
the important points:

with:
./switch-audio.sh pipewire

!!##############################
!!ALSA Information Script v 0.5.3
!!################################

!!Script ran on: Mon May 19 21:35:30 UTC 2025

!!Linux Distribution
!!------------------

Ubuntu 25.04 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 25.04" PRETTY_NAME="Ubuntu 25.04" NAME="Ubuntu" ID=ubuntu ID_LIKE=debian HOME_URL="https://www.ubuntu.com/" SUPPORT_URL="https://help.ubuntu.com/" BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/" PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and ... cies/privacy-policy" UBUNTU_CODENAME=plucky LOGO=ubuntu-logo


!!DMI Information
!!---------------

Manufacturer: ASUS
Product Name: System Product Name
Product Version: System Version
Firmware Version: 3621
System SKU: SKU
Board Vendor: ASUSTeK COMPUTER INC.
Board Name: TUF GAMING B550-PLUS


!!ACPI Device Status Information
!!---------------

/sys/bus/acpi/devices/AMDI0010:03/status 15
/sys/bus/acpi/devices/AMDI0030:00/status 15
/sys/bus/acpi/devices/AMDIF030:00/status 15
/sys/bus/acpi/devices/MSFT0101:00/status 15
/sys/bus/acpi/devices/PNP0103:00/status 15
/sys/bus/acpi/devices/PNP0501:00/status 15
/sys/bus/acpi/devices/PNP0A08:00/status 15
/sys/bus/acpi/devices/PNP0C01:00/status 15
/sys/bus/acpi/devices/PNP0C02:01/status 15
/sys/bus/acpi/devices/PNP0C02:03/status 15
/sys/bus/acpi/devices/PNP0C0C:00/status 11
/sys/bus/acpi/devices/PNP0C0F:00/status 11
/sys/bus/acpi/devices/PNP0C0F:01/status 11
/sys/bus/acpi/devices/PNP0C0F:02/status 11
/sys/bus/acpi/devices/PNP0C0F:03/status 11
/sys/bus/acpi/devices/PNP0C0F:04/status 11
/sys/bus/acpi/devices/PNP0C0F:05/status 11
/sys/bus/acpi/devices/PNP0C0F:06/status 11
/sys/bus/acpi/devices/PNP0C0F:07/status 11
/sys/bus/acpi/devices/device:27/status 15


!!ACPI SoundWire Device Status Information
!!---------------



!!Kernel Information
!!------------------

Kernel release: #15-Ubuntu SMP PREEMPT_DYNAMIC Sun Apr 6 15:05:05 UTC 2025
Operating System: GNU/Linux
Architecture: x86_64
Processor: x86_64
SMP Enabled: Yes


!!ALSA Version
!!------------

Driver version: k6.14.0-15-generic
Library version: 1.2.13
Utilities version: 1.2.13


!!Loaded ALSA modules
!!----------------------------

snd_hda_intel (card 0)
snd_hda_intel (card 1)


!!Sound Servers on this system
!!----------------------------

PipeWire:
Installed - Yes (/usr/bin/pipewire)
Running - Yes

Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - No


!!Soundcards recognized by ALSA
!!-----------------------------

0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfc080000 irq 35
1 [Generic ]: HDA-Intel - HD-Audio Generic
HD-Audio Generic at 0xfc700000 irq 61


!!PCI Soundcards installed in the system
!!----------------------------------------

03:00.1 Audio device [0403]: NVIDIA Corporation AD107 High Definition Audio Controller [10de:22be] (rev a1)
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:1726]
06:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti HDMI Audio [Radeon HD 7870 XT / 7950/7970] [1002:aaa0]
Subsystem: PC Partner Limited / Sapphire Technology Device [174b:aaa0]
08:00.4 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse HD Audio Controller [1022:1487]
Subsystem: ASUSTeK Computer Inc. Device [1043:8797]
---------------------------------------------------------


HERE I ENABLE THE SCRIPT FOR PULSE AUDIO <<----
Result:


With the script that enables Pulse Audio then:
./switch-audio.sh pulseaudio

!!####################################
!!ALSA Information Script v 0.5.3
!!####################################

!!Script ran on: Mon May 19 21:47:40 UTC 2025


!!Linux Distribution
!!------------------

Ubuntu 25.04 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 25.04" PRETTY_NAME="Ubuntu 25.04" NAME="Ubuntu" ID=ubuntu ID_LIKE=debian HOME_URL="https://www.ubuntu.com/" SUPPORT_URL="https://help.ubuntu.com/" BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/" PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and ... cies/privacy-policy" UBUNTU_CODENAME=plucky LOGO=ubuntu-logo


!!DMI Information
!!---------------

Manufacturer: ASUS
Product Name: System Product Name
Product Version: System Version
Firmware Version: 3621
System SKU: SKU
Board Vendor: ASUSTeK COMPUTER INC.
Board Name: TUF GAMING B550-PLUS


!!ACPI Device Status Information
!!---------------

/sys/bus/acpi/devices/AMDI0010:03/status 15
/sys/bus/acpi/devices/AMDI0030:00/status 15
/sys/bus/acpi/devices/AMDIF030:00/status 15
/sys/bus/acpi/devices/MSFT0101:00/status 15
/sys/bus/acpi/devices/PNP0103:00/status 15
/sys/bus/acpi/devices/PNP0501:00/status 15
/sys/bus/acpi/devices/PNP0A08:00/status 15
/sys/bus/acpi/devices/PNP0C01:00/status 15
/sys/bus/acpi/devices/PNP0C02:01/status 15
15
/sys/bus/acpi/devices/PNP0C02:03/status 15
/sys/bus/acpi/devices/PNP0C0C:00/status 11
/sys/bus/acpi/devices/PNP0C0F:00/status 11
/sys/bus/acpi/devices/PNP0C0F:01/status 11
/sys/bus/acpi/devices/PNP0C0F:02/status 11
/sys/bus/acpi/devices/PNP0C0F:03/status 11
/sys/bus/acpi/devices/PNP0C0F:04/status 11
/sys/bus/acpi/devices/PNP0C0F:05/status 11
/sys/bus/acpi/devices/PNP0C0F:06/status 11
/sys/bus/acpi/devices/PNP0C0F:07/status 11
/sys/bus/acpi/devices/device:27/status 15


!!ACPI SoundWire Device Status Information
!!---------------



!!Kernel Information
!!------------------

Kernel release: #15-Ubuntu SMP PREEMPT_DYNAMIC Sun Apr 6 15:05:05 UTC 2025
Operating System: GNU/Linux
Architecture: x86_64
Processor: x86_64
SMP Enabled: Yes


!!ALSA Version
!!------------

Driver version: k6.14.0-15-generic
Library version: 1.2.13
Utilities version: 1.2.13


!!Loaded ALSA modules
!!----------------------------

snd_hda_intel (card 0)
snd_hda_intel (card 1)


!!Sound Servers on this system
!!----------------------------

PipeWire:
Installed - Yes (/usr/bin/pipewire)
Running - Yes

Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes


!!Soundcards recognized by ALSA
!!-----------------------------

0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfc080000 irq 35
1 [Generic ]: HDA-Intel - HD-Audio Generic
HD-Audio Generic at 0xfc700000 irq 61


!!PCI Soundcards installed in the system
!!----------------------------------------

03:00.1 Audio device [0403]: NVIDIA Corporation AD107 High Definition Audio Controller [10de:22be] (rev a1)
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:1726]
06:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti HDMI Audio [Radeon HD 7870 XT / 7950/7970] [1002:aaa0]
Subsystem: PC Partner Limited / Sapphire Technology Device [174b:aaa0]
08:00.4 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse HD Audio Controller [1022:1487]
Subsystem: ASUSTeK Computer Inc. Device [1043:8797]

NOTE:
so the script enables or disables PulseAudio at the moment clearly on reboot everything goes back to normal.

TO RECAP:

!!ALSA Version
!!------------

Driver version: k6.14.0-15-generic
Library version: 1.2.13
Utilities version: 1.2.13


!!Loaded ALSA modules
!!----------------------------

snd_hda_intel (card 0)
snd_hda_intel (card 1)


!!Sound Servers on this system
!!----------------------------

PipeWire:
Installed - Yes (/usr/bin/pipewire)
Running - Yes

Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes


!!Soundcards recognized by ALSA
!!-----------------------------

0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfc080000 irq 35
1 [Generic ]: HDA-Intel - HD-Audio Generic
HD-Audio Generic at 0xfc700000 irq 61


!!PCI Soundcards installed in the system
!!----------------------------------------

03:00.1 Audio device [0403]: NVIDIA Corporation AD107 High Definition Audio Controller [10de:22be] (rev a1)
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:1726]
06:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti HDMI Audio [Radeon HD 7870 XT / 7950/7970] [1002:aaa0]
Subsystem: PC Partner Limited / Sapphire Technology Device [174b:aaa0]
08:00.4 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse HD Audio Controller [1022:1487]
Subsystem: ASUSTeK Computer Inc. Device [1043:8797]

@white
Here's an easy solution. Go to your favourite web search engine. Type: pipewire sound as root. Follow first link (if that does not help then look at further links). I hope that will put an end on your suffering with this. This solution works for most problems