Login
Username:

Password:

Remember me



Lost Password?

Register now!

Sections

Who's Online
98 user(s) are online (51 user(s) are browsing Forums)

Members: 1
Guests: 97

kishigo, more...

Headlines

 
  Register To Post  

« 1 2 (3) 4 5 6 ... 10 »
Re: New Sam460cr boards will hit the road soon!
Just popping in
Just popping in


See User information
@kas1e

Quote:
I just tested it with my RadeonHD Verde card I had in X5000 previously.. And anyway, shouldn't on serial I have something like "no bootable device found" or something, or, when RadeonHD didn't work those latest "VESA: OK" mean system freezes?

What's the exact model ? On some HD cards not all ports works under u-boot, try using VGA if you're using DVI/HDMI or viceversa.
On the serial output, the "VESA: OK" is usually the last message, after that u-boot will output on the gfx board.

Max Tretene, ACube Systems Srl, Soft3
Go to top
Re: New Sam460cr boards will hit the road soon!
Quite a regular
Quite a regular


See User information
@m3x

If I recall the card that he has I had one of the same model Radeon R7-250 that worked with my X5000 then but I could not get it to work with my Sam460ex.

http://hdrlab.org.nz/benchmark/gfxben ... phicsCard/565/Result/2022

https://www.amazon.com/Asus-128-Bit-Di ... 250-1GD5-V2/dp/B01CSDZP60

Go to top
Re: New Sam460cr boards will hit the road soon!
Home away from home
Home away from home


See User information
@max
Quote:

What's the exact model?


r7-250 (marked as HD Verde)

Quote:

On some HD cards not all ports work under u-boot, try using VGA if you're using DVI/HDMI or viceversa.


Tried both HDMI and DVI, nothing :( Strange that also keyboard didn't react (i.e. pressing num-lock, didn't work). But maybe it shouldn't work when no uboot started.

Quote:

Yeah, that the card. Even image of the card on the link 1:1 as one i have there.

Join us to improve dopus5!
AmigaOS4 on youtube
Go to top
Re: New Sam460cr boards will hit the road soon!
Quite a regular
Quite a regular


See User information

Go to top
Re: New Sam460cr boards will hit the road soon!
Home away from home
Home away from home


See User information
@Spectre, max

I tried now to put RadeonRX 560 in. Yes, I should have no uboot there, but I should have something on the serial after "VESA: OK", right? And the keyboard's num lock should work. But that not happen, the same "VESA: OK" and nothing else happens. Keyboard connected to USB external port at the back of the motherboard, tried in both connectors, the same.

I expect that even with non-visible uboot on-screen, uboot still should load, and I should see it on serial, but nothing. Tried and DVI and HDMI.

Maybe there should be some bootable device connected so uboot can start itself? Yeah, sound strange, but wtf :)

I tried now 3 cards: Radeon HD Verde, and 2 Polaris ones, and all of them tried with HDMI and DVI - in all cases all I have on serial "VESA: OK" and nothing after, ever.

Join us to improve dopus5!
AmigaOS4 on youtube
Go to top
Re: New Sam460cr boards will hit the road soon!
Not too shy to talk
Not too shy to talk


See User information
@kas1e

They really shipped this your way in that state ..Bizzare..



AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 550 / ATI X1950 / M-Audio 5.1 -> AmigaOS 4.1 FE / Linux / MorphOS
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the NET
Vampire V4SE TrioBoot
RPI4 AmiKit XE
Go to top
Re: New Sam460cr boards will hit the road soon!
Home away from home
Home away from home


See User information
@Skateman
Quote:

They realy shipped this your way ???

OMG...


You mean looks of the motherboard with repaired parts ?:) Or unexpected fast arrival of a package? But yeah, those glue parts made a feel of the repaired motherboard. If that true, who knows what issues it may have :)

Join us to improve dopus5!
AmigaOS4 on youtube
Go to top
Re: New Sam460cr boards will hit the road soon!
Not too shy to talk
Not too shy to talk


See User information
@kas1e

Yeah i mean a board that has a secondhand look and feel like you described... and full of glue and other stuff.

You paid for something new.

AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 550 / ATI X1950 / M-Audio 5.1 -> AmigaOS 4.1 FE / Linux / MorphOS
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the NET
Vampire V4SE TrioBoot
RPI4 AmiKit XE
Go to top
Re: New Sam460cr boards will hit the road soon!
Home away from home
Home away from home


See User information
@Skateman
Quote:

Yeah i mean a board that has a secondhand look and feel like you described... and full of glue and other stuff.

You paid for something new.


Yeah, I was hoped for something old produced but not sold or something. Or at least not THAT looking :) Who knows now what issues it will give me now and then and why it was repaired before :) In comparison with this, the X5000 motherboard is pure beauty. Added to that issues with video cards, non-ability to put normally usually video card and use PCI slot, is better to go for new x5000, even if it cost 3 times more.

I checked some link on Epsilons blog, where he got his sam460 5 years ago: http://amigax1000.blogspot.com/2015/0 ... am-460cr-has-arrived.html

And this one surely didn't have that mess on the PowerPSU connector and on his photos, it looks "clean". My one looks like a one-second hand and repaired :) In some parts, it even has some erased parts of the text, like someone quite often moves hands over it while fixing :)

If I were a new customer, I of course will be disappointed with the motherboard cosmetic look I got. But I had x5000 and pegasos2 already, so no big deal. Especially that it even can't work with 3 gfx cards i tried :)

Join us to improve dopus5!
AmigaOS4 on youtube
Go to top
Re: New Sam460cr boards will hit the road soon!
Quite a regular
Quite a regular


See User information
@kas1e

You dont get anything else from u-Boot at that pont without redrecting the error output to serial so it is normal.
errors would be display on VGA console normally .

Next output would be from AmigaOS boot stuff.
Radeon Rx or Radeon HD driver

U-Boot 2015.a (May 16 2015 14:20:11)

CPU:   AMCC PowerPC 460EX RevB at 1155 MHz (PLB=231 OPB=115 EBC=115)
       
No Security/Kasumi support
       Bootstrap Option H 
Boot ROM Location I2C (Addr 0x52)
       
Internal PCI arbiter enabled
       32 kB I
-Cache 32 kB D-Cache
Board
Sam460ex/crPCIe 4x PCIe 1x
I2C
:   ready
DRAM
:  2 GiB (ECC not enabled462 MHzCL4)
PCI:   Bus Dev VenId DevId Class Int
        00  04  1095  3112  
0180  00
        00  06  126f  0501  
0380  00
PCIE0
link is not up.
PCIE1successfully set as root-complex
        02  00  1002  67ff  0300  ff
Net
:   ppc_4xx_eth0
FPGA
:  Revision 03 (2010-10-07)
SM502found
PERMD2
:not found
VGA
:   1
VESA
:  OK
RadeonRX 
(2): Identified the chipset as: POLARIS11
RadeonRX 
(2): Graphics card name isRadeon RX Polaris11
RadeonRX 
(2): If - and only if - your card does not work or does not work optimally
please submit a bug report at
:
http://www.amiga.org/developer/bugreports 
Remember to include the driver version, and the following card details:
0x67FF:0x1043:0x04BE: <name of board>
and *
pleasedescribe the problems you are seeing in detail.
graphics.library PPC460ex optimizations enabled
RadeonRX 
(0): RadeonRX.chip 2.4 (5.2.2021)

RadeonRX (2): Identified the chipset as: POLARIS11
RadeonRX 
(2): Graphics card name isRadeon RX Polaris11
RadeonRX 
(2): If - and only if - your card does not work or does not work optimally
please submit a bug report at
:
http://www.amiga.org/developer/bugreports 
Remember to include the driver version, and the following card details:
0x67FF:0x1043:0x04BE: <name of board>
and *
pleasedescribe the problems you are seeing in detail.
RadeonRX (0): Platform doesn't have full memory coherence, Disabling GART.
RadeonRX (0): No VRAM object for PCIE GART.



Go to top
Re: New Sam460cr boards will hit the road soon!
Quite a regular
Quite a regular


See User information
@kas1e

Previous batch of boards were release in 2014 and we were still running Radeon HD's prior to Southern Islands cards for the most part .

Go to top
Re: New Sam460cr boards will hit the road soon!
Home away from home
Home away from home


See User information
@Specte
Hmm strange, on peg2 and on x5000, by default errors come to serial, so you can see what wrong.

And, on both of them, before video card initialization is done, there should be a bit more output, like, loading of first kickstart modules, etc.

Anyway, maybe I should try to burn the sam460 iso on a USB stick, put it in, and try with Radeon HD/Radeon RX, maybe it will bring some more info.

But then, will it boot from usb stick by default, or something need to be changed in uboot, which i can't do, as no uboot visibly ?:)

Join us to improve dopus5!
AmigaOS4 on youtube
Go to top
Re: New Sam460cr boards will hit the road soon!
Quite a regular
Quite a regular


See User information
@kas1e

If you have a video card that you use on your X5000 to boot Morphos try it on the Sam460cr .

Go to top
Re: New Sam460cr boards will hit the road soon!
Just popping in
Just popping in


See User information
@kas1e

About the 'glue': it's a last minute modification to allow the boards to work on modern ATX power supplies.
Basically what happen ? the 'cr' board have less onboard components then the 'ex' version, and its power consumption is very very low, and some/many PSU basically don't sense any load and: or they don't start at all or they give not stable output, which in turn create stability issues.
The two resistors you see are there for increasing the power load, they are not there for 'repair'.
Next batch will have this (and other minimal modifications) directly onboard.

Max Tretene, ACube Systems Srl, Soft3
Go to top
Re: New Sam460cr boards will hit the road soon!
Quite a regular
Quite a regular


See User information
@kas1e

The USB stick option might not be so easy for you as your other machines do not use the SLB boot loader that you need to set up for the Sam .

Go to top
Re: New Sam460cr boards will hit the road soon!
Quite a regular
Quite a regular


See User information
@m3x

You will have to make it easier for people to get new Sam460cr's up and running .

Go to top
Re: New Sam460cr boards will hit the road soon!
Home away from home
Home away from home


See User information
@Max
Thanks for explain!

@Spectre
Will get tomorrow new case for sam (currently testing it all on the table), and can check also that card i use for morphos on x5000 (as it has some additional power connection which for me hard to attach from current psu i use for testing)

Join us to improve dopus5!
AmigaOS4 on youtube
Go to top
Re: New Sam460cr boards will hit the road soon!
Just popping in
Just popping in


See User information
@Spectre660

Quote:
You will have to make it easier for people to get new Sam460cr's up and running

You are right! I've identified what's the problem with newer Radeon Bios card under U-boot on the Sam boards, but ATM I didn't find any solution about it.

Max Tretene, ACube Systems Srl, Soft3
Go to top
Re: New Sam460cr boards will hit the road soon!
Quite a regular
Quite a regular


See User information
@kas1e

Or if you can find a cheap HD5450 or 6450 so yo dont risk your MorphOS card .

Go to top
Re: New Sam460cr boards will hit the road soon!
Quite a regular
Quite a regular


See User information
@m3x

The only Radeon HD Southern Islands cards that I have found since a HD7750 and R7-250X to work have been OEM HP Radeon R9-255's.
Fortunately I go 2 of them.
Have just removed one from were it was in use from a Windows machine.
Two reserve cards are better than one.


Edited by Spectre660 on 2021/4/3 21:04:19
Go to top

  Register To Post
« 1 2 (3) 4 5 6 ... 10 »

 




Currently Active Users Viewing This Thread: 1 ( 0 members and 1 Anonymous Users )




Powered by XOOPS 2.0 © 2001-2023 The XOOPS Project