Login
Username:

Password:

Remember me



Lost Password?

Register now!

Sections

Who's Online
74 user(s) are online (52 user(s) are browsing Forums)

Members: 0
Guests: 74

more...

Headlines

 
  Register To Post  

(1) 2 3 4 »
atheros wlan device is working
Not too shy to talk
Not too shy to talk


See User information
Now there is a working 54mb WLAN solution for a Sam 440ep systems.

http://aminet.net/package/driver/net/atheros5000

Tested that with my Same 440ep Flex and it worked out of the box. Though I needed to add wirelessamanager manually to startup-sequence.

But seems that it need to be only configured interface on internet settings. Satarted to get DSI errors when I reconfigured Sam's own NIC.

I don't really need a wlan but it could be handy.

Go to top
Re: atheros wlan device is working
Quite a regular
Quite a regular


See User information
Good news

Go to top
Re: atheros wlan device is working
Not too shy to talk
Not too shy to talk


See User information
@utri007

Which card did you end up purchasing that works? There are quite a few listed as supported, but it's always nice to see confirmation from someone actually testing it with AOS 4.1FE.

-- eliyahu

"Physical reality is consistent with universal laws. When the laws do not operate, there is no reality. All of this is unreal."
Go to top
Re: atheros wlan device is working
Not too shy to talk
Not too shy to talk


See User information
@eliyahu

D-Link dwl-g520 rev b??

Go to top
Re: atheros wlan device is working
Just popping in
Just popping in


See User information
Using a Linksys wireless card getting the following:Trying to associated with 3c:17:10:81:of:70 (SSID= Freq=2437)
Associate with 3c:17:10:81:of:70

Go to top
Re: atheros wlan device is working
Just popping in
Just popping in


See User information
@Tuskagee

What machine and exact card? Does the machine lock up? I presume the message mentioned a network name but you removed it for privacy. What kind of encryption does the network use?

Go to top
Re: atheros wlan device is working
Just popping in
Just popping in


See User information
The computer is a Sam 440-600mhz,running amiga os4.1 FE update 1 ,the pci card is Linksys WMP55AG wireless .
The computer does not lock up,but configuration the internet prefs prevent me getting on line.

WPA:key negotiation completed with 3c:17:10:81:of:70(PTY=COMP COMP
CTRL-EVENT CONNECTED-Connection to 3c:17:10:81:of:70
Completed(auth)
WPA:EAPOL-key Replay counter did not increase -dropping packet.

I would send picture but do not know how to.


Edited by Tuskagee on 2020/6/28 19:23:18
Edited by Tuskagee on 2020/6/28 19:46:53
Edited by Tuskagee on 2020/6/28 21:22:19
Go to top
Re: atheros wlan device is working
Just popping in
Just popping in


See User information
Also I have WirelessManager in start-up ,but to get it work I have type WirelessMannager astheros5000.device in shell.

Go to top
Re: atheros wlan device is working
Just popping in
Just popping in


See User information
Why can't we have a simple GUI for wireless network?








Edited by Tuskagee on 2020/6/28 21:45:29
Go to top
Re: atheros wlan device is working
Just popping in
Just popping in


See User information
@Tuskagee

The error message "Replay counter did not increase" can appear when WirelessManager is running twice. When testing it in the shell, make sure to remove it from the Startup-Sequence (and reboot of course).

Apart from that, the connection looks successful; specifically the "CTRL-EVENT CONNECTED" message. What problems are you seeing getting online, i.e. from the TCP/IP stack?

A GUI may be available in future.

Go to top
Re: atheros wlan device is working
Not too shy to talk
Not too shy to talk


See User information
@ncafferkey

Thanks for sending out the latest update!

I understand adding some pop-up GUI would require a fair
bit of coding.

Maybe an easier stopgap would be to make WirelessManager
able to process a Break message (ctrl-c) or to give it an
ARexx port with a "QUIT" command?

Obviously, an ARexx port would provide a whole avenue for
on-the-fly reconfiguration, status reporting, etc.

Thanks again,

PJS

Go to top
Re: atheros wlan device is working
Just popping in
Just popping in


See User information
Do l remove the prism2 driver from the TCP/IP stack or reconfigure the unit number.
Then reconfigure the artheros driver in the TCP/IP stack


Edited by Tuskagee on 2020/6/29 11:04:13
Go to top
Re: atheros wlan device is working
Just popping in
Just popping in


See User information
Sort out the TCP/IP stack. The Linksys WMP55AG wireless pci card work getting download speed of 11 to 24 kb/s using netspeedometer.
Will be testing a Abit wireless card on a Sam 460 later on.

Go to top
Re: atheros wlan device is working
Not too shy to talk
Not too shy to talk


See User information
My "two interfaces" problem was because of Samba.

Go to top
Re: atheros wlan device is working
Just popping in
Just popping in


See User information
I cannot get the abit wireless adapter to work on pc / Sam 460. Is there a list of more pci-e wireless adapters?

Go to top
Re: atheros wlan device is working
Not too shy to talk
Not too shy to talk


See User information
@ncafferkey

GUI is not really import for me, BUT some sort of status window would be really usefull.

Go to top
Re: atheros wlan device is working
Just popping in
Just popping in


See User information
@Tuskagee

The only ones I'm aware of are in the list included with the driver. What exactly happens when you try to use the card?

I don't know much about the 460, but I did read that the PCIe 1x slot can't be used at the same time as the SATA port: have you previously used another card in the same slot? Alternatively, it's possible the 460 has a separate incompatibility to the one I fixed for the 440.

Also, would it be possible to try your PCI card in the 460 for comparison?

Go to top
Re: atheros wlan device is working
Just popping in
Just popping in


See User information
I thought that was the on board SATA ports and the PCIe 1x could not use at the same time. I would like to use the PCIe port as it is faster than PCI.
I think the Abit wireless card is broken.I have found two more on Ebay.

Go to top
Re: atheros wlan device is working
Just popping in
Just popping in


See User information
@Tuskagee

Yes, it's apparently the onboard SATA port that has a conflict with the PCIe 1x slot. So are you using an add-in SATA card? (Maybe that's what everyone does: as I said, I don't know much about the 460.)

Even if you don't want to use a PCI card in the 460 in the long term, I'd be interested to know if it works, as I haven't had anyone else report the results of using the new driver version on a 460. However, if that's inconvenient, don't worry about it.

Go to top
Re: atheros wlan device is working
Just can't stay away
Just can't stay away


See User information
@ncafferkey

Quote:
Yes, it's apparently the onboard SATA port that has a conflict with the PCIe 1x slot.
AFAIR, it's not a conflict as you normally understand it, it's simply the way the Sam460 hardware is made. You can select to use either the onboard SATA port or the PCIe 1x slot.

The choice is made by configuring it in the menu (or setting a UBoot variable directly) and moving a physical jumper, i.e. you need to do both things.

Best regards,

Niels

Go to top

  Register To Post
(1) 2 3 4 »

 




Currently Active Users Viewing This Thread: 1 ( 0 members and 1 Anonymous Users )




Powered by XOOPS 2.0 © 2001-2023 The XOOPS Project