I have AmigaOne X1000 and micro AmigaOne (but it is not used much recently, since I moved premises).
Quote:
On AmigaOne about 10 years ago I've experienced noisy sound and lockups.Now xMAME never lockups,only when I get a Grim Reaper,you cannot return to Workbench.
I used xMAME back in 2011-2012 on my microA1 and it worked flawlessy even on the lower specced Amiga (only 256 MB of RAM and 32 MB Video RAM) and it worked fine even on 800 MHz. I even have a video of it (low quality, but as seen no slowdowns).
Yes I used MAME between 2006-2013 aproximately and except random lockups it worked flawlessly.I have great fun alone and with friends too with the X-Arcade double controller and more than 2000 roms.
Now with AmigaOne X1000 MAME is much better experience. Faster, better resolutions and HDMI (digital) output! On the MicroA1 it is VGA (analog).
I am happy for you.For me MAME is THE EMULATOR.I had in the past dozens and dozens of screenmodes defined for MAME on my AmigaOne XE on Picasso96.And discovered great Arcades too.
Only issue that I have and is very annoying is that xMAME crashes if I have wrong ROM zip set (missing files etc.) and I have to reboot my Amiga to get back on track. So I need to have the exact MAME 1.06 ROMs sets. I am playing MAME on window on the X1000 BTW, but played full screen on the micro. Sometimes the speed is different, because on full screen, it can open lower bits screen (8-bits) instead of 16 or 24, which used to speed up a lot in the old Amigas. I don't know if this is still the case with the new graphics drivers on AmigaOS 4.1, but I can't use some of the custom screen modes, because I am framegrabbing my output to a very pick Decklink capture card.
Yeah I see.I ussually have problems with the zipfiles of some roms like Street Fighter 2 and clones and it doent force me tom reset instead it decreases my RAM memory.
[qoute]
The point is that is happening me since ages and don't know why,for example on NEO-GEO roms it doesn't sound on the Bios startup sound,
All I can say is that is an annoying sound issue and to solve it I will need real help,
Did you try different NEO-GEO bios? Quote:
Yes but it happens not only with NEO-GEO roms but with others too.Don't know why really
xMAME 1.06 rules!!!
Yes, so far xMAME 1.06 seems to be the most stable and working for me. There are newer versions also MESS and SDLMAME, but they are not stable on my X1000. Probably need to try them again on the μA1.
Yeah is really stable and funny.For us whom whe love the 80s and some 90s Arcades as well as all catalogue (at least I) is a real pleasure to watch and play these Arcades again without investing money.
Also, I don't know how much X5000 is faster than the X1000, but you can try hyperemulation (Emulator in Emulator). Yesterday, I ran some MAME0.37b14 games under DOSBox SVN (DOSBox with JIT) and got more than 10 FPS with some games. Sound was okay. I am waiting for my Amiga X5000/040, then I can test again.
I see TheMagicSN (Steffen Häuser) active again on the Amiga. He was one of the first people to port MAME to AmigaPPC. Probably, he can look into fixing some of the old bugs (or recompiling the old sources against newer libs), or even porting the latest MAME (v251 as of now)? With version 0.162 MESS merged with MAME and it became quete and beast of an emulator (I use it a lot and even have some bugs submitted and fixed), but also our Amigas improved a lot since then (speedwise and memory - what matters most for MAME).[/quote]
Yeah i noticed that Steffen is back on the Amiga.Some weeks ago he sent me a message on this Amiga page and days later we talk and he finally sent me a working version of Quake 2 labeled beta and I can play without sound on my AmigaOne X5000.That's because my buyed version didn't work at all:Great game Quake 2.I am betatester of Quake 2 now but I have to talk or e-mail with him in order waht he want of me as a betatester of Quake 2.
Maybe I will ask about MAME later
Cheers
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
On AmigaOne about 10 years ago I've experienced noisy sound and lockups.Now xMAME never lockups,only when I get a Grim Reaper,you cannot return to Workbench.
The point is that is happening me since ages and don't know why,for example on NEO-GEO roms it doesn't sound on the Bios startup sound,
All I can say is that is an annoying sound issue and to solve it I will need real help,
xMAME 1.06 rules!!!
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
I have problems with the xMAME 1.06 port ,Final Burn and sometimes on MickJT MPLayer.
For example on this evening,on some roms I experienced that when I loaded at the beggining there is no sound until for example when the demo of the Arcade Machine begun and I feel similar as bad when I tried to play and the sound lasted for some seconds to appear.This was on xMAME 1.06,
On Final Burn the same and with MickJT Mplayer same results.
These behavior was identical when I plugged and solve my initial sound issue back on December of 2021 when I was living on another house until December 2021.
Why this strange/erroneus behavior? Is this fixable? How can I run my MAME roms without loss of sound?
Is vital and very important to me.
Thanks in advance
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
I hope we can play soon Heretic 2 and Quake 2 in all it's glory!!!
Amiga World deserves these new things
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
Yeah it's very weird to me too that the media doesn't boot never.
I checked the CD-RW when I booted on AmigaOS 4.1 with a pendrive and I did copy all my MorphOS files on the unit DH0 renamed as SYS after formatting.So the CD must be OK.
Yes I usually use the Boot Morphos button without result yet.
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
Yeah i know but it doesn't boot the CD-RW neither the USB pendrive.
I am lost in the ice,what can I do now?l
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
Now I managed to boot AmigaOS 4.1 from my pendrive and I have formatted my DH0 Morphos under AmigaOS 4.1 and named as SYS.
With this AOS and a Morphos CD,I am copying all my Morphos files inside the HD to see if they boot
My dominant question is: Can I do my MorphOS installation with AmigaOS 4.1 or no?
And I am doing well or is it mission impossible?
And I booted on AmigaOS 4.1 after using the Mass Storage option on U-Boot
Any help will be really apreciated.
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
I recently downloaded a file of 2469 Commodore 64 files in "nib" format.As VICE doesn't seem to recognize or at least equally load at all the mentioned "nib" roms.
I have two probably minor or mayor issues: How to run if possible these "nib· roms and...
I tried to configure my joypad and I did but after the configuration the joypad isn't recognized by the VICE emulator so I must not play any game.
Can anybody just figure out why this happens on VICE?
I want to play my NIB,D64&T64 roms inside VICE.
My joypad is an X-Box type of I think.
Best Regards
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
On my AmigaOne XE I used 8 or 9 AmigaOS4 boot iterations.
But for some reason only worked few,probably 2 or 3.Don't know why.
My AmigaOne XE is broken (I burnt the HD) and need some repair.
Who knows maybe in the future? Let's hope yes
I love Amiga NG
And this was when AmigaOS 4.1 Update 6 was ruling the Amigacamp
Edited by MamePPCA1 on 2022/11/21 20:45:38
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
OK but I want to re-install Morphos.I don't want to use any of my X5000's HDDs as PC drives.
That's clear enough.
Thanks to all
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
I miss a lot Morphos specially for browsing Facebook and specially downloading games and emulators such as MAME.
Anyway I still feel "novice" in this Amiga SO/system.
Time will tell really what the future holds.
Just formatted Morphos partitions uith FAT32 I think and on gparted utility.
Hope this helps.
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
First let's capture the essence to re-install Morphos 3.17 again.
Then I will see when can I buy the key/license.
Thanks Templario!
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
Tried all but it shows the same messages as yesterday.
No Morphos booting.
In one messages it says too "trying to load "l/slb_v2" from DH0.
Is this related to AmigaOS4.1? I think yes because yesterday I booted AmigaOS 4.1 from a pendrive and formated all Morphos partitions as SFS/00 and SFS/02 inside Workbench with Media Toolbox HD preparation utility
How this affects to a possible Morphos installation?
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
I had downloaded Morphos 3.17 and burned to a USB pendrive before.
Now I will have to enter the options on U-Boot
Meny thanks skateman and all for read.
Trying later
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
OK the problem comes here since 2 or 3 weeks that I have Morphos installed without booting.I tried several times with a CD-RW and a pendrive and the result was 0.On Fienix I formatted all the Morphos partitions cause they didn't boot and that was how I did on the previous succesfull attempt.I did the formats with gparted.
I entered "usb reset" and "bootmorphos" but it always give me the error message as:
"morphos bootloader version 1.10"
Then:
"failed to scan partitions on device 1"
And finally:
"failed to load a valid MorphOS kernel"
This on "boot from optical"
With the USB pendrive an MorphOS CD-RW prepared to boot and attached
What can I do? I want to re-install MorphOS again!
Thanks in advance
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
Can I have Internet any other than with bsdsocket library?
And what about a CD drive?
I am really stuck on this emulator and uaerc file.
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
Tried the filesystem2 line but no luck.Still says that cannot find the "Work" partition on Workbench 3.9 on bootup
Maybe bacause my "Work" dir is sized on 17.8 GB? Is very heavy I think.
Apart of this I want to use Internet on the Amiga emulation as I have the line of bsdsocket as true but it doesn't work with YAM or IBrowse.
If I result these 2 issues I will probably don't write more and set the thread as "SOLVED"
Cheers
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
News feed
OS4 Feedback forum
OS4Depot Feedback forum
Amigabounty forum
OpenAmiga forum
AmiCygnix forum
ABC shell forum
AmiKit forum
Cinnamon Writer forum
CodeBench forum
Digital Universe forum
Dopus 5 forum
E-UAE forum
Gnash forum
Ibrowse forum
JAmiga forum
Odyssey forum
OWB forum
Qt forum
SmartFileSystem forum
Timberwolf forum
TouchDevice forum
TuneNet forum
Unsatisfactory Software forum
