I have an external NTFS formatted hard disk that I use for file transfer between Amiga and PC. It was formatted on a laptop PC and works fine on the PC. It is recognized when I plug it in to my Amiga through USB but file transfer is really slow so I want to access it as an external SATA drive. When I plug it in as an external SATA drive it is not recognized. Media Toolbox sees it but won't access it unless it's installed. My question is: If I install the drive in Media Toolbox will it still work on a PC??
Amiga X1000 with 2GB memory & OS 4.1FE + Radeon HD 5450
I have an external NTFS formatted hard disk that I use for file transfer between Amiga and PC. It was formatted on a laptop PC and works fine on the PC. It is recognized when I plug it in to my Amiga through USB but file transfer is really slow so I want to access it as an external SATA drive. When I plug it in as an external SATA drive it is not recognized. Media Toolbox sees it but won't access it unless it's installed. My question is: If I install the drive in Media Toolbox will it still work on a PC??
Is your external drive originally an ordinary SATA drive which you just use with different adapters? How do you connect it as an _external_ SATA drive? I do not own a X1000, but does it indeed have an external eSATA port...?!
In my X5000, if I connect SATA drives, initialized into the MBR format, to the internal Sata connectors, the NTFS partitions are recognized also by AmigaOS. There is no need to install them with Media Toolbox.
Yes; AmigaOS4.1 suffer from many poor design decisions, and this is one of them.
Basically, MBR support is integrated into USBMasterStorage.device driver, instead of making a shared Amiga library for MBR, by not doing so, they made it unscary complicated to support MBR systemwide.
(NutsAboutAmiga)
Basilisk II for AmigaOS4 AmigaInputAnywhere Excalibur and other tools and apps.
They have lot more in USBMasterStorage.device, they also have mounter formatting commodity in there. That’s also not accessible to any other device driver.
(NutsAboutAmiga)
Basilisk II for AmigaOS4 AmigaInputAnywhere Excalibur and other tools and apps.
Basically, MBR support is integrated into USBMasterStorage.device driver, instead of making a shared Amiga library for MBR, by not doing so, they made it unscary complicated to support MBR systemwide.
Not true, the partition mounting code from the mass storage driver was split off into its own kickstart module, "mounter.library", in 2014 and has been available publicly since 4.1 Final Edition.
The X5000 and A1222 on-board SATA drivers are in fact already making use of this library.
@Gregor I have a Delock eSATAp adapter that mounts in the extra front 5.25 inch drive bay on the front of my X1000 case. The adapter is connected to one of the internal SATA ports (on the motherboard. I don't know if Delock still makes those kinds of adapters.
Amiga X1000 with 2GB memory & OS 4.1FE + Radeon HD 5450
Mounter doesn't recognize the drive, so I guess I'll need to figure out how to create a mount file for the drive and try that.
Do you have any MorphOS machine around? You could connect the drive as an USB disk. MOS's Mounter can recognize a MBR partition and create a mountlist for it. You could then try to edit the mountlist parameters (device etc.) for use with AmigaOS.
News feed
OS4 Feedback forum
OS4Depot Feedback forum
AmiCygnix forum
ABC shell forum
AmiKit forum
Cinnamon Writer forum
CodeBench forum
Digital Universe forum
Dopus 5 forum
E-UAE forum
Gnash forum
Ibrowse forum
JAmiga forum
Odyssey forum
OWB forum
Qt forum
SmartFileSystem forum
Timberwolf forum
TouchDevice forum
TuneNet forum
Unsatisfactory Software forum
Donate
