Login
Username:

Password:

Remember me



Lost Password?

Register now!

Sections

Who's Online
103 user(s) are online (27 user(s) are browsing Forums)

Members: 2
Guests: 101

328gts, TheMagicSN, more...

Support us!

Headlines

 
  Register To Post  

Sil 3114 on microAmigaOne doesn't boot
Site Builder
Site Builder


See User information
I got a Sil 3114 SATA card for my microAmigaOne from Vesalia. I installed it at the micro but the disk, which has installed the AmigaOS 4.1FE, doesn't boot, and the U-BOOT replies that it can't find the SLB. This problem occurs also with a bootable cd rom of AmigaOS.

From the preferences of uboot I choosed to boot from SIL serial disk and parallel disk, but no luck at all.

The card seems to be recognized by uboot, as I see it when I ask the pci list.

Did anyone managed to make it work on his system? Is the SIL 3114 bootable or should I find a 3112?

Thank you in advance for your help.

Follow me on
Ko-fi, Twitter, YouTube, Twitch
Go to top
Re: Sil 3114 on microAmigaOne doesn't boot
Just can't stay away
Just can't stay away


See User information
It won't boot unfortunately. You'll have to boot first on an IDE device.

--
AmigaONE X1000 and Radeon RX 560
Go to top
Re: Sil 3114 on microAmigaOne doesn't boot
Site Builder
Site Builder


See User information
:(

Neither 3112 boots?

Follow me on
Ko-fi, Twitter, YouTube, Twitch
Go to top
Re: Sil 3114 on microAmigaOne doesn't boot
Not too shy to talk
Not too shy to talk


See User information
@walkero

Which version uBoot do you have?

The last official uBoot doesn't support booting from SATA (any SATA interface), only ide (either internal or PCI).

There is an unofficial uBoot that does support it.

Go to top
Re: Sil 3114 on microAmigaOne doesn't boot
Site Builder
Site Builder


See User information
@davew
I use the latest official uboot. I never heard for an unofficial one. where can I find it? Are there any problems with this one?

Follow me on
Ko-fi, Twitter, YouTube, Twitch
Go to top
Re: Sil 3114 on microAmigaOne doesn't boot
Not too shy to talk
Not too shy to talk


See User information
@walkero

I'm not sure if the AmigaOne XE and MicroA1 use the same uBoot, but I have 1.1.4 on my A1XE.

I got it from a user on (I think) AmigaWorld.

I understand there were some problems with it, which is (partly) why it wasn't released, although the only problems I have seen is that (a) with the 3114, only channels 1 & 3 are visible to uBoot (not a big problem) (b) the menus sometimes look messed up (cosmetic) and (c) uBoot Prefs doesn't recognise the new values added for SATA, so you have to set the boot devices either by command line or from the "fancy video menu" in uBoot.

Go to top
Re: Sil 3114 on microAmigaOne doesn't boot
Not too shy to talk
Not too shy to talk


See User information
@daveyw

IIRC the latest official supports booting from a SII 3112. In sys:prefs/uboot you can even choose to boot from a Serial device using UBoot 1.1.1.

Go to top

  Register To Post

 




Currently Active Users Viewing This Thread: 1 ( 0 members and 1 Anonymous Users )




Powered by XOOPS 2.0 © 2001-2024 The XOOPS Project