Try dropping the speed of the cpu. I had to set mine quite low to start with (about 266mhz before my A1 kicked in) Have you made sure that the voltage dipswitches on the motherboard are set to all off? I.E. the lowest setting possible 1.34Volts.
How you do that (dropping speed)? I assume with the DIP switch on the CPU module? Have you a table with DIP settings and speed values?
DIP switches on the MB are all set to OFF.
edit: english grammar
Bye, TMTisFree
"Never ascribe to malice that which is adequately explained by incompetence." (Napol?on Bonaparte) "I would love to change the world, but they won?t give me the source code." (Unknown)
I was without my A1 from 8th August2005 to 25th March 2007. The only reason I know that is from my D-Net history.
Woow, quite a long time!
Bye, TMTisFree
"Never ascribe to malice that which is adequately explained by incompetence." (Napol?on Bonaparte) "I would love to change the world, but they won?t give me the source code." (Unknown)
If you have old cables lying around, u can build one. All u need is a knife and duct tape. And verify your PSU (its the first thing you should do)
Jack
Yes I have a ton of serial cables, but as said before, I'm lazy. The PSU voltages were tested before rebuilding the A1. I just bought a PCI post code analyser to find what's the problem with the A1 MB (if any).
Bye, TMTisFree
Edited by TMTisFree on 2007/6/29 23:01:54
"Never ascribe to malice that which is adequately explained by incompetence." (Napol?on Bonaparte) "I would love to change the world, but they won?t give me the source code." (Unknown)
the dip switch settings are available on IntuitionBase.com. I started off with x2 and the A1 kicked into life. Once I had installed OS4 final I then started playing around with other setttings until I settled with x4.5 (on off off off). Having had one cpu blow I am not so willing to try overclocking, this setting gives me 1.266Ghz. I don't know the reason why the A1 kicked into life at the lower speed, maybe others could enlighten us, all I know is that it worked for me. Good luck
Woww, this is working! I set the multiplier at x2 but nothing on the screen. I then recheck all: I forgot to connect the VGA cable! When connected, UBoot shows up normally.
Thank you very much for your advice! I am rebuilding the system right now and will do a "coucou" from the A1 when ready. Again, thank you so much!
Bye, TMTisFree
"Never ascribe to malice that which is adequately explained by incompetence." (Napol?on Bonaparte) "I would love to change the world, but they won?t give me the source code." (Unknown)
A small 'coucou' from AWeb! After reconnecting the 2 HDDs and tweaking UBoot a bit, the A1 boots OS4 normally! Normally? Noooo!! It boots so fast that I do not see it booting (WindowsXP since more than 6 monthes, you know what I mean...)!
UBoot says I'm flying at 1.267GHz!
Arrrgh, what a wonderfull day, it's Chrismas in june!
Bye, TMTisFree, now installing OS4 Final
"Never ascribe to malice that which is adequately explained by incompetence." (Napol?on Bonaparte) "I would love to change the world, but they won?t give me the source code." (Unknown)
Good for you mate. Now maybe we can get some work out of you.
What do you exactly mean with 'work'? I'm a user mostly and have almost no skill at programming, except with ARexx. And I'm lazy.
Bye, TMTisfree
"Never ascribe to malice that which is adequately explained by incompetence." (Napol?on Bonaparte) "I would love to change the world, but they won?t give me the source code." (Unknown)
"the expression, 'atonal music,' is most unfortunate--it is on a par with calling flying 'the art of not falling,' or swimming 'the art of not drowning.'. A. Schoenberg
You can i.e. install the DNetC client and crunch us to the first place in OGR
People are dying. Entire ecosystems are collapsing. We are in the beginning of a mass extinction. And all you can talk about is money and fairytales of eternal economic growth. How dare you! – Greta Thunberg
the dip switch settings are available on IntuitionBase.com. I started off with x2 and the A1 kicked into life. Once I had installed OS4 final I then started playing around with other setttings until I settled with x4.5 (on off off off)....this setting gives me 1.266Ghz. I don't know the reason why the A1 kicked into life at the lower speed, maybe others could enlighten us, all I know is that it worked for me.
Your math puzzles me, or it is 7457's thingie to run at 1266MHz with x4.5 multiplier?
Jack
"the expression, 'atonal music,' is most unfortunate--it is on a par with calling flying 'the art of not falling,' or swimming 'the art of not drowning.'. A. Schoenberg
"Never ascribe to malice that which is adequately explained by incompetence." (Napol?on Bonaparte) "I would love to change the world, but they won?t give me the source code." (Unknown)
TMTisFree wrote: @Jack In short, yes. And I don't know why
Waiting for the opportunity to check it myself. Maybe being in the 2-nd batch saved me a minor heart attack
"the expression, 'atonal music,' is most unfortunate--it is on a par with calling flying 'the art of not falling,' or swimming 'the art of not drowning.'. A. Schoenberg
@Jack Fraid I don't know Jack. I just tried different settings until I had the right speed starting from 2x. I don't think the old speed table can apply with the new cpu but it still works somehow. 1266/4.5 =281 mhz......I don't know where that is coming from.
Hey Jack you have got the wrong hobby if you dont want heart attacks
Yep, I know. Currently having one: my module appears to be missing one of L3 cache chips. Max is investigating the issue.Looks like it prevents the module from functioning correctly
Jack
"the expression, 'atonal music,' is most unfortunate--it is on a par with calling flying 'the art of not falling,' or swimming 'the art of not drowning.'. A. Schoenberg
Mine is being stress tested over the weekend(i think). At least, i believe Max will send it out on Monday
What a great day, just one more week to go
People are dying. Entire ecosystems are collapsing. We are in the beginning of a mass extinction. And all you can talk about is money and fairytales of eternal economic growth. How dare you! – Greta Thunberg
I expect you to perform a banana dance here soonish
@LiveForIt
Good luck.
Jack
"the expression, 'atonal music,' is most unfortunate--it is on a par with calling flying 'the art of not falling,' or swimming 'the art of not drowning.'. A. Schoenberg
News feed
OS4 Feedback forum
OS4Depot Feedback forum
Amigabounty forum
OpenAmiga forum
AmiCygnix forum
ABC shell forum
AmiKit forum
Cinnamon Writer forum
CodeBench forum
Digital Universe forum
Dopus 5 forum
E-UAE forum
Gnash forum
Ibrowse forum
JAmiga forum
Odyssey forum
OWB forum
Qt forum
SmartFileSystem forum
Timberwolf forum
TouchDevice forum
TuneNet forum
Unsatisfactory Software forum
