Now i finally got it working the way i wanted.

.uaerc and .uaerc_RunInUAE files are identical and .uaerc file is write protected.

RunInUEA adds an that additional Workbench line to the RunInUAE configuration file, but the system works fine with that additional line now without problems :)

I have same as your config

RunInUAE.cfg:
uaeexe = Work:Emulation/E-UAE_1.0.0_SDLGFX/uae
uaescr = n/a
uaepri = 0
uaebkg = 0
uaefds = 0
timeout = 20
wbprefs = 0

There is no any
filesystem2=rw,DH0:Workbench:KDH1:Emul/UAE/RunInUAE/WB31,1

I have installed E-UAE_1.0.0_SDLGFX and manage at last to install RuninUAE but problem occurs when i start RunInUAE, it change the DH0: hardisk name to Workbench, it doesn't matter if i change it in .uaerc_RunInUAE file back, it makes new harddisk line which contains second DH0: which is named Workbench.

My DH0: name is always been System

I was using wrong output in back of the sound card :)

Now everything works fine.

Now i installed HDAUDIO.lha package which gave me all settings in Sound settings and new mixer also, there is no sound however

This card should work but no sound card is shown in the Sound settings. Devs audiomodes and ahi side have emu10kx and hdaudio files.

Sysmon informs that there is Creative Labs Sound Core3D (Sound Blaster Recon3D/Z-Series)

The card is new and model is SB1570.

Please help!)

Happy Birthday Amiga OS4, i hope so we see OS5 someday.

At some point i tried to change the gl_texturecache and it remained at small value, so that fixed the problem when i raised it back to 40000000

My machine is: X5000 + RX580 8Gb + 8Gb ram.

The game mostly runs really wekk, but at certain points you can't really play game when fps goes under 5fps,
these levels is Silverspring final level and Darkmire Swamps level, i haven't played beyond that.

Changing the resolution doesn't help and all latest drivers are installed.

Renderer chanhing does not help either. Heretic II is the newer version.

Now i got it working :) It was different button than Amigainput shows. Tryed to assing all button to jump button and it works then i have to on by one changing attack button for all other buttons.

@Lio

Thanks. Not work in Frogatto because it has already gamepad support but you cannot change buttons. I believe that this AIA program only support games that are designed for keyboard only.

I dont know how to use it, it does not do anything and there is not any instructions either :(

@Lio

Thank You!

They answered that cannot be done, only keyboard layout is changeable.

This would not be a very difficult thing for a programmer to do.

I mail them but no answer at all.

@skynet

I have also V4SA, A500, A1200, CD32, they all have great machines :)

@skynet

Congratulations on the purchase of the new machine, it is really extraordinary machine.

I have an X5000/20 with 8Gb ram + Sapphire Radeon RX580 8Gb

@Firetail

Really no one has a solution of this problem?

The problem is that I can't change the keys when using the gamepad.

Now the attack button is the left button and the right is jump, I would like to change the jump button but it cannot be changed anywhere.

I have configured the controller from AmigaInput and there the only place where you can change those buttons is on the LowLevel side, which games does not use.

No need i have X5000 :)