@MamePPCA1
Hi! Perhaps you should start from scratch; this may be the most straightforward option: partition your drive and make sure your first partition is bootable. Ignore where it says to install Slb. You don't need it on the x5000. After partitioning your drive, save and reboot, and then try installing your OS.
Oh, you need a 5450 graphics card to install. I think
Cheers

@FirstNinja
Hi! Originally I was a first adopter but was informed that I wasn't so I bought a x5000 instead really happy with it just thought I'd share the info its credible.
cheers.

Hi! it was sent by Laurent Amedia computers thanks

Hi! all I just thought I'd share this with I received this offer this morning.

It concerns early adopters!
After a prolonged period of anticipation, we are thrilled to announce that
the Amiga A1222 project has come to fruition ! We are reaching out to our
Early Adopter customers with an exclusive offer for the A1222 Plus
motherboard. This offer includes a full digital AmigaOS 4.1 license, the
latest Enhancer v2.2 update from A-EON Technology, and a complete system
recovery USB stick.

To recap, the A1222 Plus motherboard boasts the following features:

⦁ P1022 1.2GHz Dual Core processor (utilizing one core under OS4 and both
cores under Linux)
⦁ SoDDR3 1600MHz memory slot (supporting a maximum of 8GB)
⦁ MicroSD card slot for UBoot software MicroSD card
⦁ PCI Express x16 slot for Radeon RX5xx gfx card
⦁ DVI port video output (not recommended for OS4)
⦁ Gigabit Ethernet LAN port (X2)
⦁ Audio output port
⦁ Serial output port (for debugging)
⦁ Two USB2 ports on the backpanel
⦁ Two internal USB2 on motherboard

The standard end customer price is 1,199.00 euros, but as an Early Adopter
customer, we are pleased to offer it to you at the special price of 1 089,00
euros which includes Luxembourg VAT. For customers residing outside of
Europe or VAT-registered companies the price is reduced to 938,79 euros !
N.B. : Shipping costs and Paypal costs are NOT included in this price !

Latest Acube news.

We are pleased to announce that, finally, after all the delays we suffered, all the remaining Sam460LE boards were delivered to us from the assembly line, and we are finalizing the QA and functional tests.

After all the stress tests for every board are completed, we will start shipping the boards to customers.

We plan to start shipping at the end of next week.

Thanks again for your patience.

@3m3x

Great news nice to hear.
Cheers

Hi! all just wondering if there is any news on the replacement parts and when will Acube recommence delivery of the next batch of boards.

Wonderful when will shipping commence this is great news.

Hi guys just tried once more using a known working graphics card 2 x new 4 gig hyperx mem sticks @1600 mhz and still the same no signal? what I have noticed is the sd card supplied is 32 gig I thought they were 4 gig this may be the problem also cant get putty to install to do a serial debug can someone suggest another terminal proggie Ican use.

@kas1e Hi! thanks for your reply I ran the latest board on the bench taking all anti static precautions maybe it is me which I doubt anyway I will try again on thursday when I'm off work hopefully a positive result.
cheers

I have had similar problems with Amedia I purchased a new board in January which would not display even the boot animation so I contacted them and after many photos sent and even buying new ram and another video card with no results I sent the board back to them at my expense only to be told it would be sent to A-Eon for repair. I have sent two emails since with no reply woeful support
So I Saved up again and bought another board from Amigakit and guess what exactly the same problem as the previous board from Amedia. Stupid me I have the day off this Friday and will try to get it working again to say I'm unhappy is an understatement I've never had problems like this before anyway I'll try again but I'm not getting my hopes up.
cheers

I have had similar problems with Amedia I purchased a new board in January which would not display even the boot animation so I contacted them and after many photos sent and even buying new ram and another video card with no results I sent the board back to them at my expense only to be told it would be sent to A-Eon for repair. I have sent two emails since with no reply woeful support
So I Saved up again and bought another board from Amigakit and guess what exactly the same problem as the previous board from Amedia. Stupid me I have the day off this Friday and will try to get it working again to say I'm unhappy is an understatement I've never had problems like this before anyway I'll try again but I'm not getting my hopes up.
cheers

@freddix

I was thinking more along the lines of the memory chips
themselves it would be interesting to see if these problems could be related to the Brand, speed of these modules Are we all using the same modules? and what ram modules is Slayer using.
Food for thought.

@Hans

Hi! all I have my SAM FLEX 800 with a genuine ATI 1550 512M PCI up and running off vga after a few minor probs.
will post a detailed account tomorrow night on Hans website when I have more time, one thing I will quickly say is It would not boot with 1 gig mem remove one module and your card should boot also I had to edit the Kicklayout myself as install script froze at 83% no big deal has anyone else come across this? I thought it could be because I was running a 9800 and the script was looking for the new graphics card maybe Hans can throw some light on this.
cheers.

@acefnq

Yes most work, just insert and it should be recognised automatically, and appear on your workbench. You dont have to install or move any drivers I have never had any problems.
cheers

@Hans

hI! all happened to me once, using a clean install, screen suddenly went black as if monitor went into standby mode and I had to reboot to get up and going again I agree with Hans I also think there is a bug in the video card driver which I'm sure in time will get fixed.
I,ve turned VC off and all is sweet at the moment hope it stays that way:).
cheers

@ChrisH

Yes Chris is right take great care I downloaded the pinouts and double checked them before connecting and everthing is working as it should:) I have installed OS4.1 and it does seem to load quicker, opening windows and foders seems quivker too. I still have to tidy up the wiring and I'm thinking of puting a fan and heatsink on the cpu anyones thoughts on this do you think it needs one? All in all I,m impressed the only thing I dont like is the clutter of sata cables under the rear of the graphics card theres not much room. I,ll do some testing tonight and let you all know whats happening.
seeya

@Slayer

Gotcha! mine arrived Friday just starting to put it together,I even read the manual :) God I must be getting old, will take it easy with the case usb though, it has single wire conectors. I've downloaded the pinouts so I should be right. Should have it up and running this evening (have to take the old girl out to lunch part of the deal:)
seeya

@Slayer

Lucky bar stewards

my Sam was posted last thursday should receive it towards the end of this week then the fun shall begin.

@Slayer

Have a Flex 800mhz on order been gathering all the necessary hardware and am ready for it. Just as a point of interest who did you place your preorder with mate, I preordered with Versalia allways superquick and reliable and very helpful as well. anyone else from down our way got a Flex on order maybe we all can compare notes.