@orgin

Hi, dl and here (spain) it displays now hh:mm:ss

@orgin

Well just try to rename a file/dir it opens a window/requester to enter the new name, leave the window/requester and try to reach the WB menu-options (Workbench/Window/Icon/Tools) with RMB, it takes a few seconds to show them. Hope noew is more clear, easy to understand.

BYE & THX

@orgin

When trying to rename or such it shows a window/requester.
If i then try to use WB menus or another menu it delays a few seconds until such menu is open/showed.

And if it opens the output window/shell it stays forever unitl you close it, could such windows be automatically be closed when command is finished?

BYE & THX

@jaokim
http://crashlog.os4depot.net/
OR
http://bugs.os4depot.net/

BYE

@Antique

Try rc-ftpd is old, but easy to setup and works fine under OS4. I use it to transfer big files from my A1 to PC

AMINET:
http://aminet.net/comm/tcp/rc-ftpd.lha

@BillE

Hi me too had to switch to an older version of a1serial.device (a1serial.device 51.11 (26-12-2005)
), 'cos ity closed me coneection in couple of minutes :-/

Maybe the MODEM InitString is wrong or can help too sometimes (check which one is used under windows or by trial/error).

@saimo

Spanihs:

2 options:

1) "Ampliar/Reducir mapa" more or less it means "Zoom in/out map"
2) "Mostrar mapa" it could be translated as "Display map"


..and well a 3rd one "Zoom del mapa" as your original "Zoom map"

your choice

BYE

@BillE

javierdlr AT euskalnet.net

Hope it works

@spotUP

Great!!! gimme gimme!!! TYX for such effort mate!

@BillE

If myou want send my via PM .cd files and will trasnalte it to spanish in my spare time.

BYE & THX

@orgin

BTW localization is a bit unfinished no??

I translated it to spsnish, and strings that are on .cd they don't show localized (others don't know where they belong).

PROJECT menu string shows garbled text instead of localized one (maybe wrong mem pointer os such, 'cos it shows text string from other programs [IBrowse,...])

And some string are twice or three times on .cd (ex. 'Workbench Screeen',...)

BYE

@satiropan

Do you mean it doesn't work on your system without applying cardpatch and cardreset?

Or if you must use cardpatch and cardreset to make your card work OK?


BYE

@satiropan

Seems they are not needed any more


card.resource
..
- Added workaround for the A1200 PCMCIA hardware reset bug (software
patches or hardware hacks no longer required for ethernet cards, etc).
..

Try without/with such patches and post results here

BYE

@Chris

And if you want i can update/fix the spanish catalog.
With permission of its author (don't know if he's still on active)

Send me the wet.cd via PM

BYE & THX

@Chris

you're right, just added such service and no more crashlog.
I've got that 'service' ficle since first OS4 beta versions
and didn't change it.

Maybe you can add a warning in the guide if such problem araise the user can check if he has that service added.


THX

@Chris

tried wet.debug V5.4 and got a GR

crashlog:
http://crashlog.os4depot.net/cl117

THX & Hope it helps

@Valiant

I too get a GR at start :-/ don't know if helps, but here is the crashlog:

Crash log for task "Wet"
Generated by GrimReaper 52.7
Crash occured in module Wet at address 0x7F3149D4
Type of crash: DSI (Data Storage Interrupt) exception

Register dump:
GPR (General Purpose Registers):
0: 7F3149D0 6A80F5B0 00000000 6A80F5D4 68D7615C 00000000 00000004 3FFFC000
8: 6A80F5D8 6A80F5D8 00000001 68D7615C 6A80F570 6A825130 6A820000 6A820000
16: 6B5ACDE0 6A81D8F0 6A80F980 6A820000 6B61F490 6B5ACDE0 6A81CF20 00000000
24: 00000000 6A81CD20 6A81CE20 6A820000 6A820000 00000000 00000000 68E23F84


FPR (Floating Point Registers, NaN = Not a Number):
0: nan 3.67963e+296 -1.39925e-309 1.25533e+58
4: 9.59132e+38 -1.36876e-231 5.87755e-39 1.05422e-79
8: 1.05423e-79 -4.17219e-309 5.20079e+08 -3.09891e-303
12: 3.85191e-32 4.16002e-32 0 0
16: 0 0 0 0
20: 0 0 0 0
24: 0 0 0 0
28: 0 6372 3959 -9.41667

FPSCR (Floating Point Status and Control Register): 0x82068000

SPRs (Special Purpose Registers):
Machine State (msr) : 0x0200F030
Condition (cr) : 0x24002024
Instruction Pointer (ip) : 0x7F3149D4
Xtended Exception (xer) : 0x20000000
Count (ctr) : 0x00000000
Link (lr) : 0x7F3149D0
DSI Status (dsisr) : 0x40000000
Data Address (dar) : 0x00000008


680x0 emulated registers:
DATA: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
ADDR: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
FPU0: 0 0 0 0
FPU4: 0 0 0 0

Symbol info:
Instruction pointer 0x7F3149D4 belongs to module "Wet" (HUNK/Kickstart)

Stack trace:
module Wet at 0x7F3149D4 (section 5 @ 0xC9B4)
module Wet at 0x7F315190 (section 5 @ 0xD170)
module Wet at 0x7F317364 (section 5 @ 0xF344)
module Wet at 0x7F31AA3C (section 5 @ 0x12A1C)
module Wet at 0x7F320684 (section 5 @ 0x18664)
native kernel module newlib.library.kmod+0x00001f38
native kernel module newlib.library.kmod+0x00002bcc
native kernel module newlib.library.kmod+0x00002d48
_start()+0x170 (section 1 @ 0x170)

PPC disassembly:
7f3149cc: 4e800421 bctrl
7f3149d0: 40920054 bne- cr4,0x7F314A24
*7f3149d4: 801d0008 lwz r0,8(r29)
7f3149d8: b0010022 sth r0,34(r1)
7f3149dc: 813bd260 lwz r9,-11680(r27)

@HammerD

I tried PUBSCREEN=Workbench2 (have such screen defined on Screens_Prefs) and started OWB (not OWBLauncher, just the browser itself) and it opened on its own screen.
Maybe the WINDOW#? tooltypes in OWB are too large to fit in your defined screen?

if your defined screen is 1024x768 try these values:

WINDOWLEFT=50
WINDOWTOP=50
WINDOWWIDTH=800
WINDOWHEIGHT=600

Hope it helps. BYE

@MamePPCA1

Hi can you make a snapshot of such window and maybe i can change/update the catalog (os4 spanish trabnslator)?
and send it to my privately, of course

javierdlrATeuskalnetDOTnet

@VooDoo

Maybe your camera doesn't use massstorage as media, some cameras use ptp protocoll for transfering images. :-/ such method is not yet available IIRC

Does your USB work? :-/ maybe plugin another masstorage media or a mouse/keryboard to test.

See manual of your camera to see which protocl supports for transfering images.

Hope it helps

BYE