You have to change a few parameters.

The Path to the roms for example.
I dont think you have an A1200: assign, so just point to the location of the roms.

Also the hardfiles (Virtual HDDs) are different then the ones i am using in my config.

If you adjust these it might work ..

Here a dump of my .uaerc config i have been using for a while now.


kickstart_rom_file=A1200:rom/kicka1200.rom
kickstart_key_file=A1200:rom/rom.key

amiga.floppy_path=A1200:Floppies

floppy_speed=400
floppy0sound=0
scsi=true
scsi_device=true
show_leds=false
# hardfile=rw,32,1,2,512,WORK:AROS/Aros_Vision.hdf
# hardfile=rw,32,1,2,512,WORK:A1200/Drives/System_ADVSP.hdf
hardfile=rw,32,1,2,512,WORK:A1200/Drives/System.hdf
hardfile=rw,32,1,2,512,WORK:A1200/Drives/Work.hdf

joyport0=mouse
joyport1=joy0

cpu_type=68020
cpu_compatible=true
cpu_cycle_exact=true
cpu_speed=max

chipset=aga
immediate_blits=yes
collision_level=full

chipmem_size=16
bogomem_size=0

fastmem_size=0
z3mem_size=256
gfxcard_size=32

sound_output=exact
sound_channels=mixed
sound_frequency=44100
sound_latency=120

amiga.screen_type=ask
amiga.publicscreen=ask
gfx_fullscreen_amiga=false

amiga.use_dither=false
gfx_framerate=1

# Display settings
gfx_width=1024
gfx_height=768
gfx_width_windowed=720
gfx_height_windowed=568
gfx_fullscreen_amiga=no
gfx_fullscreen_picasso=yes
gfx_lores=false
gfx_linemode=double
gfx_correct_aspect=no
gfx_center_horizontal=smart
gfx_center_vertical=smart

# Miscellaneous
use_debugger=no
ppc.use_tbc=false

# Network

# bsdsocket_emu=true

# JIT
cachesize=8192
cpu_compatible=false
cpu_cycle_exact=false
blitter_cycle_exact=false
comp_constjump=yes
comp_trustbyte=indirect
comp_trustword=indirect
comp_trustlong=indirect
comp_optimize=true

I think i have configured something like that a while ago..

https://www.youtube.com/watch?v=2INIaQ7Ce3E&t=3s

Very nice video!!
Keep up the good work.

@amigakit

I might have missed it, but has this VA HD driver promise already been taken care of....

[Solved thanks]

@Spectre660

Lets hope the real Ethernet driver for the X5000 will be released soon.

@Spectre660

Why not using the onboard Ethernet adapter ??

Welcome back!!!

@Raziel

As stated on Trevors Blog....http://blog.a-eon.biz/blog/

Thanks for the update Steven. If all goes well Steven plans to demonstrate Multicore running on the X5000 at Amiwest 2022.

Works great on my X5000 and RX570!!

@Marcian

Thanks ordered the Saturday and setpatch party as well. So all weekend AmiTime it is! (next stop...finding a nice Hotel)

Thans for keeping me posted.

@walkero

Thanks a lot Walkero, another job well done!!!
I found my favorite backdrop at amiga-look a long time ago.

@walkero

Nice!! I have send @Marcian a PM regarding a ticket for the saturday as well so i can be there the whole weekend!

@Marcian

I could get hold of a ticket for Sunday 16th only. Hope to see you guys there!

@MamePPCA1

Good to hear your up and running again!!
Way to go!

I made a typo ... sorry...my DH0.1 is named MOSYS: not MOSSYS:
DH1.1 is named MOSWORK:

All running fine as we speak.
Thanks!!

@MamePPCA1

I am also running AmigaOS and MorphOS on my X5000.
As my Ami knowledge is also not that good, i had some scary moments myself...but.. its running now..

Since AmigaOS and MorphOS by default both use a DH0, DH1 SYS: WORK: etc.. i did this... (if i recall correct)

I installed morphos on a seperate HD using the folowing..

DH0 => became DH0.1 and i labeled this MOSSYS:
DH1 => became DH1.1 and i labeled this MOSWORK:

Now both systems dont bite each other.

Hope this points you in the right direction.

@VooDoo

Something like Sysmon ?

@trixie

Great read as always, and thanks so much for the first release of RAVE!!
Will post this on my Blog as well!

Keep up the good work!

@Gregor

Why not use the onboard X5000 adapter ??