Who's Online |
58 user(s) are online ( 25 user(s) are browsing Forums)
Members: 1
Guests: 57
kas1e,
more...
|
|
|
|
Re: Updater tool: latest releases and updates
|
Posted on: 2022/10/28 15:49
#241
|
Not too shy to talk
|
HURÁÁÁ!
Finally I place the payment.
I did the same as usual, only: Firefox - 1. tab opened link from browser, all cycled again and no payment, stays open - 2. tab logged to my paypal - 3. tab opened again the same link, cannot pay
then I closed paypal tab on third tab I can finish the payment.
Magic or IT? Please, don't do it to me next time. Such shock...
|
AmigaOS3: Amiga 1200 AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000 MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
|
|
|
Re: Updater tool: latest releases and updates
|
Posted on: 2022/10/28 8:40
#242
|
Not too shy to talk
|
NOT WORKS!!!
I tried e-mail link, link from browser tried Firefox, Chrome, Explorer, even Vayfarer on MorphOS tried be logged to AMIStore, tried have opened checkout window, tried to be unlogged tried be logged on AmiSphere on the sane PC with paypal even tried tunnels to Nerherlands and Great Britain
simply, for me it not works!!!
? maybe special paypal setup ( I have no card connected )
A-EON - PLEASE, ARRANGE ALTERNATE PURCHASE/PAYMENT ( or special step-by-step foolproof steps for blondes )
I really want a NOVA Bridge!!!
Edited by sailor on 2022/10/28 9:07:33
|
AmigaOS3: Amiga 1200 AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000 MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
|
|
|
Re: Updater tool: latest releases and updates
|
Posted on: 2022/10/27 19:24
#243
|
Not too shy to talk
|
I am not paying directly from AmiStore, but press "send email" button. I received email with Paypal link. And this going in circles and cannot pay. And also not works wia browser and copy link
Edited by sailor on 2022/10/27 19:41:29
|
AmigaOS3: Amiga 1200 AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000 MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
|
|
|
Re: Updater tool: latest releases and updates
|
Posted on: 2022/10/27 18:50
#244
|
Not too shy to talk
|
I second this. Just now I want to pay with Paypal NovaBridge, and Paypal payment not works. Final payment not executed and allways return to same page - with button"Pay". My last Paypal transaction was week ago with no problems.
|
AmigaOS3: Amiga 1200 AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000 MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
|
|
|
Re: Switch between many amigaos4 machines
|
Posted on: 2022/10/27 18:07
#245
|
Not too shy to talk
|
I am using two KVMs:
Gembird CAS441: 4x PS/2+VGA for older machines. Works perfectly everywhere. Secomp DVI USB switch: 4x USB + DVI. Works in operating system, but during early boot ( firmware ) keyboard not detected, so I cannoct select U-Boot or OpenFirmware options.
I use also Aten 4port USB sharing device US424. ( no shared video). It wotks in OS, and partially in early firmeare boot - I have to very quick re-select proper device after reset.
So I also ask you, if you know KVM USB + DVI/HDMI working also in firmware, it will be super.
|
AmigaOS3: Amiga 1200 AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000 MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
|
|
|
Re: Switch between many amigaos4 machines
|
Posted on: 2022/10/27 17:57
#246
|
Not too shy to talk
|
@kas1e there is also MKShare tool on AMIStore. I am not tested but probably it is like Synergy. I.e. at least one Amiga ( with mouse and keyboard ) must be turn on.
I know, it is not exactly you want, but sometimes can help.
|
AmigaOS3: Amiga 1200 AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000 MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
|
|
|
Re: NovaBridge released!
|
Posted on: 2022/10/27 11:09
#247
|
Not too shy to talk
|
@K-L I have Warp3D-SI. Its compatibility is not 100%. For example GLQake not works, and this one I often use for benchmarking, tests, comparing with MorpOS drivers. And with AmigaOne XE Warp3D-SI is totally useless - crashed every application I tested. So I am looking forward for better compatibility here.
|
AmigaOS3: Amiga 1200 AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000 MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
|
|
|
Re: NovaBridge released!
|
Posted on: 2022/10/27 9:56
#248
|
Not too shy to talk
|
@kas1e Excellent review. Thank you! I was missing exactly such infos.
For sure I will purchase NovaBridge for X1000 and Sam440ep-flex. And now I have to test again AmigaOne XE ( grrrrr, finished it a week ago without Nova Bridge!). I hope compatibility will be better with Bridge.
|
AmigaOS3: Amiga 1200 AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000 MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
|
|
|
Re: RadeonHD V.5 driver
|
Posted on: 2022/10/27 9:20
#249
|
Not too shy to talk
|
@Hans, Mathew
Please, are there at least theoretic plan to release RadeonHD v.5 for Sam440ep-flex?
I have it ( together with DVPlayer and Emotion ) for my X1000 and it woks fine for HD videos, with low CPU utilization. But it is fair to tell that X1000 is powerfull enough to play HD videos on CPU only ( utilized upto 100% ) and for me gives a much more sense to have RadeonHD v.5 on Sam440ep-flex. On this machine for me also not works Polaris cards, so I should have HD7xxx.
I cannot imagine how complex is for example to modify Sam460ex version to Sam440 ( same core, different SoC components ), but if a betatester will be needed, one is here.
|
AmigaOS3: Amiga 1200 AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000 MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
|
|
|
Re: big video about X1000
|
Posted on: 2022/10/27 8:00
#250
|
Not too shy to talk
|
@kas1e ( and thread ) nice case modification! Compact, small, nice - I should think on such modifications too, I am slowly running out of space But in this case is not DVD. Yes, it is not much needed today, but I have a question: Do you have experience with USB external DVD? Can AmigaOS eject the CD with "eject" command? Because MorphOS cannot do it with external USB DVDs. Only with IDE or SATA directly connected. It probably have something with ATAPI simulation over USB.
|
AmigaOS3: Amiga 1200 AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000 MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
|
|
|
Re: Amiwest 2022. Any OS4 announcements expected?
|
Posted on: 2022/10/27 7:22
#251
|
Not too shy to talk
|
Quote: tekmage wrote:NovaBridge is available now on AMIStore.
this is great news! I wonder if it will work also on Sam440ep-flex or even AmigaOne XE ( especially on XE is big problem with Warp3D-SI ). Are there some more info about it? Speed, compatibility? there is very short http://wiki.amiga.org/index.php?title=NovaBridgeand there https://keasigmadelta.com/blog/novabri ... bility-amiwest-2021-talk/ a little bit old For sure it is a must-have on my X1000 ( and Sam440ep-flex, if it is compatible ) and on other computers - especially XE - I will test and see.
Edited by sailor on 2022/10/27 9:05:16
|
AmigaOS3: Amiga 1200 AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000 MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
|
|
|
Re: big video about X1000
|
Posted on: 2022/10/26 19:48
#252
|
Not too shy to talk
|
@Raziel
This number is real traffic test with TCPSpeed application, against my dual-xeon workstation. 20971520 bytes read, 40960 kB/s = 320 Mbps.
All 100 MbE NICs in my Amigas have 90 Mbps, AmigaOneXE (G4/800MHz) with 1GbE NIC has 140 Mbps.
Of course, such speed works with no CPU-hungry applications like FTP, wget, NetFS. If you read for example crypted web pages with a lot of java script, CPU have a lot of work with this, so NIC speed goes down. So speed is upto 320 Mbps.
And I am also not sure about AmiTCP speed, but I am looking forward for its routing ability. Roadshow lacks it ( and old MiamiDX had ). And bond / etherchannel will be also great. Especially for Sam440.
|
AmigaOS3: Amiga 1200 AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000 MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
|
|
|
Re: big video about X1000
|
Posted on: 2022/10/26 14:48
#253
|
Not too shy to talk
|
@kas1e excellent video. Thanks! X1000 is a great machine. My first AmigaNG was Pegasos 2 + MorphOS, but second was X1000 + AmigaOS. I like her.
RTL8139D will work, but it is 100 MbE only with real speed 90 Mbps. Far better is RTL8169 - this is 1 GbE, with real speed 320 Mbps on X1000.
|
AmigaOS3: Amiga 1200 AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000 MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
|
|
|
Re: Radeon RX cards on X1000
|
Posted on: 2022/10/25 17:21
#254
|
Not too shy to talk
|
Super! Thanks a lot.
|
AmigaOS3: Amiga 1200 AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000 MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
|
|
|
Re: Sam440ep-flex + 1 GbE ethernet NIC
|
Posted on: 2022/10/25 17:20
#255
|
Not too shy to talk
|
@afxgroup yes, static have the same symptoms. Settings OK, no traffic. I also tried setup with addnetinterface and many variations of config. Including the Filter param. It works on XE and not on Sam. Very strange. And the most strange is that with one PCI card I can use rtl8169.device:0 and rtl8169.device:1 with the same results. I have no other ideas. Maybe inspect the packets by Wireshark. Or I try to made point-point network with other comp to exclude some ARP issues. No Sam440 1GbE user here? P.S. I corrected the debug output above - is better readable now.
Edited by sailor on 2022/10/25 18:52:34
|
AmigaOS3: Amiga 1200 AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000 MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
|
|
|
Re: Sam440ep-flex + 1 GbE ethernet NIC
|
Posted on: 2022/10/24 19:58
#256
|
Not too shy to talk
|
no succes. I tried also working card from A1 XE. It received IP address but no traffic. I can ping only own address, and not ping others, even not my gateway.
Mon Oct 24 18:40:47 2022 [debug]: Interface 'Test1GbE' hardware address = 00:18:E7:17:CE:AF.
Mon Oct 24 18:40:52 2022 [debug]: Setting up BOOTP packet for 'Test1GbE' with hardware address 00:18:E7:17:CE:AF.
Mon Oct 24 18:40:52 2022 [debug]: Sent initial DHCPDISCOVER request for 'Test1GbE'; transaction ID=0x1B1BD649, retry timeout=0:00:03 hours, allocation timeout=0:01:00 hours.
Mon Oct 24 18:40:55 2022 [debug]: DHCP retry timeout for 'Test1GbE' has elapsed.
Mon Oct 24 18:40:55 2022 [debug]: Setting up BOOTP packet for 'Test1GbE' with hardware address 00:18:E7:17:CE:AF.
Mon Oct 24 18:40:55 2022 [debug]: Resent DHCPDISCOVER request for 'Test1GbE'; transaction ID=0x43DCE83F, retry timeout=0:00:08 hours.
Mon Oct 24 18:40:58 2022 [debug]: Received BOOTP/DHCP server message for 'Test1GbE'.
Mon Oct 24 18:40:58 2022 [debug]: Picking up BOOTP/DHCP server message for 'Test1GbE'.
Mon Oct 24 18:40:58 2022 [debug]: Configuration information for 'Test1GbE': Server identifier = 192.168.1.1.
Mon Oct 24 18:40:58 2022 [debug]: Setting up BOOTP packet for 'Test1GbE' with hardware address 00:18:E7:17:CE:AF.
Mon Oct 24 18:40:58 2022 [debug]: Setting up DHCP packet for 'Test1GbE' with transaction ID = 0x43DCE83F, server address = 192.168.1.1, client address = 192.168.1.161.
Mon Oct 24 18:40:58 2022 [debug]: Responding to DHCP offer; sent DHCPREQUEST request for 'Test1GbE'; transaction ID=0x43DCE83F, retry timeout=0:00:05 hours.
Mon Oct 24 18:41:03 2022 [debug]: DHCP retry timeout for 'Test1GbE' has elapsed.
Mon Oct 24 18:41:03 2022 [debug]: Setting up BOOTP packet for 'Test1GbE' with hardware address 00:18:E7:17:CE:AF.
Mon Oct 24 18:41:03 2022 [debug]: Setting up DHCP packet for 'Test1GbE' with transaction ID = 0x43DCE83F, server address = 192.168.1.1, client address = 192.168.1.161.
Mon Oct 24 18:41:03 2022 [debug]: Resent DHCPREQUEST request for 'Test1GbE'; transaction ID=0x43DCE83F, retry timeout=0:00:08 hours.
Mon Oct 24 18:41:03 2022 [debug]: Received BOOTP/DHCP server message for 'Test1GbE'.
Mon Oct 24 18:41:03 2022 [debug]: Picking up BOOTP/DHCP server message for 'Test1GbE'.
Mon Oct 24 18:41:03 2022 [debug]: Server has responded to address allocation request for 'Test1GbE'. Suggested IP address is 192.168.1.161.
Mon Oct 24 18:41:03 2022 [debug]: Checking if the IP address 192.168.1.161 proposed for 'Test1GbE' is already in use.
Mon Oct 24 18:41:03 2022 [debug]: Configuration information for 'Test1GbE': Server hardware address = D8:58:D7:00:6F:81.
Mon Oct 24 18:41:05 2022 [debug]: IP address verification timeout for 'Test1GbE' has elapsed.
Mon Oct 24 18:41:05 2022 [debug]: Configuration information for 'Test1GbE': Server identifier = 192.168.1.1.
Mon Oct 24 18:41:05 2022 [debug]: Configuration information for 'Test1GbE': Address lease time = 0 day(s), 1:00:00 hour(s).
Mon Oct 24 18:41:05 2022 [debug]: Configuration information for 'Test1GbE': Address renewal time = 0 day(s), 0:30:00 hour(s).
Mon Oct 24 18:41:05 2022 [debug]: Configuration information for 'Test1GbE': Address rebind time = 0 day(s), 0:52:30 hour(s).
Mon Oct 24 18:41:05 2022 [debug]: Configuration information for 'Test1GbE': Subnet mask = 255.255.255.0.
Mon Oct 24 18:41:05 2022 [debug]: Configuration information for 'Test1GbE': Router = 192.168.1.1.
Mon Oct 24 18:41:05 2022 [debug]: Configuration information for 'Test1GbE': Domain name = "lan".
Mon Oct 24 18:41:05 2022 [debug]: Configuration information for 'Test1GbE': Host name = "SamTest".
Mon Oct 24 18:41:05 2022 [debug]: Configuration information for 'Test1GbE': Domain name system server = 192.168.1.1.
Mon Oct 24 18:41:05 2022 [debug]: Binding address of 'Test1GbE'.
Mon Oct 24 18:41:05 2022 [debug]: Configuration information for 'Test1GbE': Server identifier = 192.168.1.1.
Mon Oct 24 18:41:05 2022 [debug]: Configuration information for 'Test1GbE': Server IP address = 192.168.1.1.
Mon Oct 24 18:41:05 2022 [debug]: Setting interface 'Test1GbE' address to 192.168.1.161.
Mon Oct 24 18:41:05 2022 [debug]: Setting interface 'Test1GbE' net mask to 255.255.255.0.
Mon Oct 24 18:41:05 2022 [debug]: Interface 'Test1GbE' IP address is now set to 192.168.1.161/255.255.255.0.
Mon Oct 24 18:41:06 2022 [debug]: Interface 'Test1GbE' address successfully changed to 192.168.1.161/255.255.255.0.
All in log is OK, same as in Ranger. In Router I see the lease also correctly. And One more strange thing: I can use both rtl8169.device:0 and rtl8169.device:1 with only single card! Strange! With rtl8169.device:2 it generates error "canot open.." as expected. But what about rtl8169.device:1 ??? Cannot be there some mismatch with Sam440 internal NICs? There are two, 0 and 1. There are also nvenvars in Uboot: ethaddr = MAC of sam unit 0 eth1addr= MAC of sam unit 1 ethact=ppc_4xx_eth0 ... what is it? probably this is NIC what Uboot using. But can be it connected with AmigaOS selected NIC?
Edited by sailor on 2022/10/24 20:24:22 Edited by sailor on 2022/10/25 18:51:48
|
AmigaOS3: Amiga 1200 AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000 MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
|
|
|
Re: Sam440ep-flex + 1 GbE ethernet NIC
|
Posted on: 2022/10/24 8:15
#257
|
Not too shy to talk
|
@Raziel thank you, I will try the "id=", maybe it helps. I was surprised, because even on AmigaOne XE it works OOTB. And XE is very picky with PCI cards. And all my computers are in the same VLAN, on the same switch, connected to router ( which gaves DHCP responses )
|
AmigaOS3: Amiga 1200 AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000 MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
|
|
|
Re: Radeon RX cards on X1000
|
Posted on: 2022/10/24 7:45
#258
|
Not too shy to talk
|
@Raziel thank you for info. Please, can you share your exact type of RX560? I will take the most tested card - RX560. And than I will wait for very-low-price of RX580 and 590
|
AmigaOS3: Amiga 1200 AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000 MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
|
|
|
Re: Official release date of Doom3 for AmigaOS4
|
Posted on: 2022/10/23 19:25
#259
|
Not too shy to talk
|
X1000 + HD 7970 default.cfg, timedemo = 13.6 FPS Sam440ep-flex + R9 270X default.cfg + renderer=arb = 4.3 FPS finally I finish testing of AmigaOne XE and can return graphics card to my Sam. @HunoPPC it was only quick test, and till 15th November I will not be at home. But after that I try to adjust Sam's .cfg if it change something. P.S. Autoexec.cfg placed in /demo have no effect to timedemo (at least screen resolution) It have to be placed to /base and it works also for timedemo.
|
AmigaOS3: Amiga 1200 AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000 MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
|
|
|
Re: Radeon RX cards on X1000
|
Posted on: 2022/10/23 17:09
#260
|
Not too shy to talk
|
Hi,
is still RX560 the fastest card for X1000?
I want to change from HD 7970 ( start to have some glitches ) to RX and I need some powerful.
And do somebody know if Huno's Doom3 works on X1000+RX ?
thanks!
|
AmigaOS3: Amiga 1200 AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000 MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
|
|
|