@mr2

Enhancer 2.0 included Radeon Rx Driver v2.4 .
So unless you prepaid for Enhancer 2.0 your time line is off .

@ddni

Unless you have Radeon HD Driver V4.x or higher you will not get the hardware acceleration with a Radeon HD card

@ddni

Sam460ex

version AmigaOS_4.1:Kickstart/PCIGraphics.card full
PCIGraphics.card 53.18 (11/16/2019)

@walkero

Radeon RX550 to -Rx580 cards have been beta tested .
RX550 & Rx560 cards with Sam460ex & X5000 Machines .
RX570 & RX580 with the X5000 machines .

@ddni

Try a know working video .

Prometheus%20-%20Trailer.mp4

scr 61A949C0 dri 61A94B96
try composite blitting
yes composite blitting supported
try yuv blitting
jupp yuv blitting :D
ok window created set render hook
window all done ready to render
main thread: reset videostate
main thread: reset videostate done
main thread: wait for decoder_thread
decode thread: open streams
decode thread: found video streamID: 0
decode thread: found audio streamID: 1
decode thread: found video streamID: 2
decode thread: fill stream infos
decode thread: got framerata: num: 74520000.000000 den: 3119369.000000
decode thread: fps: 23.88
decode thread: got framerata: num: 0.000000 den: 0.000000
decode thread: fps: -1.-2147483648
decode thread: choose start streams
decode thread: videomutex
decode thread: audiomutex
decode thread: open streamcomponents
decode thread: create audio thread (streamindex 1)
decode thread: wait for audio_thread
audio thread: init sound
audio thread: opts: tolayout: 3 tofmt: 2 srate: 44100 flayout 3 format: 8 srate: 44100
audio thread: init sound done
main thread: wait for decoder_thread
decode thread: video master
video thread: open va decoder
VADecoder: va.library found
main thread: wait for decoder_thread
main thread: wait for decoder_thread
VADecoder: VA Video Acceleration supported (V1.5) displayid: 1529309264
decode thread: accelerator: h263_vaapi found
decode thread: accelerator: h264_vaapi found
decode thread: accelerator: mpeg2_vaapi found
decode thread: accelerator: mpeg4_vaapi found
decode thread: accelerator: vc1_vaapi found
decode thread: accelerator: wmv3_vaapi found
video thread: open va codec
VADecoder: H264 Hardwaredecoder found
VADecoder: Hardwaredecoder found
main thread: wait for decoder_thread
VADecoder: vaContext (12) succesfully created
decode thread: Hardware decoder support this codec :D
video thread: init video pixelformat ov: 53 av: 27 -> am: 6 YUV: 0
video thread: create image convert context...
video thread: context id: 0
decode thread: duration: 69.404442
decode thread: ready to go
main thread: set window properties
main thread: window properties done
main thread: bitmaps video: 0x0/0 framebuffer: 1920x816/6
main thread: alloc new render bitmap 1920 816 format: 6
main thread: set new videobitmap
main thread: videobitmap created
set new window dimensions depending on apsect ratio 818 x 461 > 818 348
decode thread: all ok go to mainloop
audio thread: start audio ios
audio thread: started
video thread: all done now go to mainloop
VADecoder: H264 Hardwaredecoder found
VADecoder: Hardwaredecoder found
VADecoder: error VA could not query surface status: 5
main thread: all done now go to mainloop
VADecoder: surfaces used: 0
VADecoder: error VA could not query surface status: 5
VADecoder: surfaces used: 1
VADecoder: error VA could not query surface status: 5
VADecoder: surfaces used: 2
VADecoder: error VA could not query surface status: 5
VADecoder: surfaces used: 3
VADecoder: error VA could not query surface status: 5
VADecoder: surfaces used: 4
VADecoder: error VA could not query surface status: 5
audio thread: delay 0.702727...
audio thread: delay 0.539669...
audio thread: delay 0.387033...
audio thread: delay 0.234398...

@ddni

I dont know if any Radeon RX 590 models were beta tested.
So that is a grey area.

@ddni

This is what you should get :

video thread: open va codec
VADecoder: H264 Hardwaredecoder found
VADecoder: Hardwaredecoder found
VADecoder: vaContext (12) succesfully created
decode thread: Hardware decoder support this codec :D

@ddni

Also check your Emotion tool types .

YUVAccel = TRUE
VAAPIAccel = TRUE

@ddni


12.SYS:Firmware/amdgpu> list
polaris12_uvd.bin 375424 ----rwed Tuesday 10:57:12
polaris11_uvd.bin 375424 ----rwed Tuesday 10:57:12
polaris10_uvd.bin 375424 ----rwed Tuesday 10:57:12
3 files - 1099K bytes - 2205 blocks used

@Raziel

Only by using a driver version before or up to 1.19 or so .
Worth reporting the issue though .
Hopefully we may also get some feedback from Goos and imagodespira later on too .

@Raziel

It is possible that the freezing is caused the GART stuff.
Doubt that the Radeon RX was ever tested on the X1000.

Mantis bug report time ..........

@Raziel

Cool .
You are almost there.
Just a few more tweaks.

AmigaOS_4.1:Devs/Monitors/Radeon

"Detect settings automatically" disabled in ScreenMode preferences .

CMPLENGTH=6
BOARDNAME=Radeon
VSYNCMIN=60
VSYNCMAX=60
HSYNCMIN=31000
HSYNCMAX=85000
MODE=640x480@60
MODE=800x600@60
MODE=1024x768@60
MODE=1280x720@60
MODE=1280x800@60
MODE=1280x960@60
MODE=1280x1024@60
MODE=1440x900@60
MODE=1600x900@60
MODE=1600x1200@60
MODE=1680x1050@60
MODE=1920x1080@60
DISABLEFAKENATIVE=Yes
INTERRUPT=Yes

@Raziel

some combinations of Monitors and Video card may cause DDC not
to work properly.

@Raziel

Probably not getting your monitors specs.
So you would have to set modes etc in your monitor file .

and disable "Detect settings automatically " in ScreenMode preferences .

@rjd324

We are about there.
Plus the X1000 Radeon Rx "hick hack"

https://www.amigans.net/modules/newbb/ ... id=132328#forumpost132328


https://os4welt-de.translate.goog/view ... _tl=en&_x_tr_hl=en#p44921

@walkero

It has been rumored as possible for a few years now
but Goos's post is the first confirmation that anyone has
actually gotten it to work .

AmigaOne X1000 and Radeon RX graphics cards

contribution from goos»Today 12:32

But with a little hick hack I managed to get my RX 550 to run in the X1000 and I have to say the RX drivers from Enhancer 2.2 are running really well here. Whether 3D (the RX550 is just as fast as my R7 250x, which burns a lot more power) or video output, I can finally watch my 1080p 60 fps cell phone videos directly on the Amiga with 0% CPU load. :D

https://os4welt-de.translate.goog/view ... _tl=en&_x_tr_hl=en#p44923

@mr2

No Beta Testers with Sam440ep /Radeon HD configuration.

The Sam460ex driver might work on the Sam440ep but no guarantees.