@walkeroQuote:

LiteXL now runs perfectly in 16 bit output and it is fast. I like the editor very much.
Good job and thanks for the support. This text editor also understands drag and drop which is really very good. Thanks

@walkero

We need to be able to reproduce it somehow to be able to improve it, as already mentioned here it works very well. I also don't know your hardware configuration, since you are developing under AmigaOs4.1 we can actually exclude a faulty setup of the network under AmigaOs4.1.

Someone with a real Pegasos 2 and a rtl8139 network card could possibly help and maybe confirm that the driver causes problems under AmigaOs4.1, but someone with such a configuration will be hard to find.

Otherwise we would have to start debugging it to solve the problem.

@Raziel

You must not blame Windows when it shuts down and disconnects, the problem is unfortunately with AmigaOs4.1 it simply does not recognize when a connection is lost and does not log off the shared order.

Your configuration is also a bit difficult, I use smb2 under QemuPeg2 AmigaOs4.1 to be able to move data from host/guest and that works really well.

I would like to help you as you helped me, but unfortunately I don't know what to do in this situation. I am sorry......

@white

Apparently -cpu 7457 under Qemu is the best choice at the moment, I did some tests with Lame and Quake timedemo. With Lame test and -cpu 7457 I first get 20 seconds decoding, that's really remarkable, with Quake timedemo I'm not far from 30 FPS software rendering that's impressive. Also this CPU is fully supported under AmigaOs4.1 Ranger/Altivec etc.

Unfortunately I don't have a comparison with WinUae, but it will probably be much slower.

Also with the SFS version of the Classic Edition I could not see any difference to the version of Enhancer.

Is there a good tool for AmigaOs 4.1 to test read and write accesses?

Lame G4 Test




Quake Timedemo

@thellierQuote:

Nice to meet you, are you still working on Wazp3D, or have you already abandoned the project ?

@Raziel

What did they call their handler ? I called it smb2 example:

DISMOUNT "smb2:" FORCE

I don't know if it solves your problem, but it logs off all shared folders.

@K-L

I have it set up like this under AmigaOs4.1 and MacOs.

Handler = L:smb2-handler
Priority = 5
StackSize = 65536
GlobVec = -1
Startup = "smb://mac-studio/shareFolder
USER=xyz PASSWORD=xyz VOLUME=ShareFolder"

It is important that you remove the brackets () in the handler the tooltype ACTIVATE=0, otherwise the share will not be registered under AmigaOs 4.1. You can also use ACTIVATE=1 if you start the handler only when you need it.

@white

I'm not sure what this test is good for, SFS already works very well under my system. I installed the last version of Enhancer Software 2.2.

It is of course possible that the enhancer version accesses other routines that do not exist under Qemu.

Tonight I will test the Classic version under Qemu and test read and write access.

Thanks for the information.

I have a short question, is there a way to compile mplayer-mickjt with the new SDL2 edition? mplayer-mickjt uses a very old SDL1.x.x version and there are problems with it when playing videos under AmigaOs4.1. To describe the problem I made a short video.

Mplayer mickjit

@Petrol

I could ask him if he would compile it with all the dependencies. He chose the easiest way, it is only for testing purposes to improve the Qemu FPU emulation. Since this version makes no use of the FPU it is of course incredibly fast compared to the version of Os4Depot under Qemu AmigaOs4.1, but certainly on real hardware like AmigaOne x1000 x5000 it should run much better.

@Raziel and Capehill

ScummVM runs perfectly once the configuration is set up. In fullscreen mode it is a bit slow due to the lack of 3d support, but in windowed mode it runs really well.Thank for your help.

ScummVM/MilkyTracker/QPeg2AmigaOs4.1

@CapehillQuote:

Damn it works yeahooooo

Started via the shell with "--gfx-mode=surfacesdl". SDL2 Prefs settings "Software"

You made me happy a second time, very good work. Is there also a way that I can start ScummVM directly without using the shell and command?

Should I still debug it?

ScummVM QemuPeg2

I wanted to run the game Blade Runner, but ScummVM tells me that no "engine" was found. I used the last compiled build of Raziel. Do I still need to assign the engines to ScummVM?

ScummVM Error message

@white

I have something for you, you may want to test it. smarkusg has compiled ffmpeg with libshine and libmp3lame under AmigaOs4.1. It is not FPU dependent and should be very fast.

ffmpeg

@walkero

A good text editor is always welcome. I am looking forward to the new version. From the pictures I could see on Os4depot this editor is very powerful and complements the standard editor of AmogaOs4.1 a lot more, I could use something like this.

@Raziel

It is enough that they help, it will certainly take some time to find a solution.

You and Capehill are doing a great job, together we will solve the problem.

I will test this as best I can with your instructions to minimize the sources of error. Sure I could use ScummVM under my Mac, but that's no fun for me, I want to use it under AmigaOs4.1 and also test it. And if we solved the problem under Qemu Pegasos 2, it is also solved under WinUae

Thanks for your help and support.

@CapehillQuote:

Sorry I had it on OpenGL, changed to software and tested again.

Quote:

I have entered it in the .ini:

gfx_mode=surfacesdl
fullscreen=false

And tested with it now. No window will be opened.

Quote:

I followed these instructions and started DumpDebugBuffer after running ScummVM.

Log DumpDebugBuffer:

6.Workbench:> DumpDebugBuffer
graphics.library AltiVec/VMX enabled
graphics.library PPC74xx optimizations enabled
SYSTEM_CTRL 00100000
MISC_CTRL 00100001
MISC_TIMING 00000000


peg2ide.device 53.22 (28.6.2017)
000: 0040 3FFF 0000 0010 7E00 0200 003F 0000
008: 0000 0000 514D 3030 3030 3120 2020 2020
016: 2020 2020 2020 2020 0003 0200 0004 322E
024: 352B 2020 2020 5145 4D55 2048 4152 4444
032: 4953 4B20 2020 2020 2020 2020 2020 2020
040: 2020 2020 2020 2020 2020 2020 2020 8010
048: 0001 0B00 0000 0200 0200 0007 3FFF 0010
056: 003F FC10 00FB 0110 0000 03C0 0007 0007
064: 0003 0078 0078 0078 0078 4000 0000 0000
072: 0000 0000 0000 0000 0000 0000 0000 0000
080: 00F0 0016 4021 7400 4000 4021 3400 4000
088: 203F 0000 0000 0000 0000 6001 0000 0000
096: 0000 0000 0000 0000 0000 03C0 0000 0000
104: 0000 0000 6000 0000 0000 0000 0000 0000
112: 0000 0000 0000 0000 0000 0000 0000 0000
120: 0000 0000 0000 0000 0000 0000 0000 0000
128: 0000 0000 0000 0000 0000 0000 0000 0000
136: 0000 0000 0000 0000 0000 0000 0000 0000
144: 0000 0000 0000 0000 0000 0000 0000 0000
152: 0000 0000 0000 0000 0000 0000 0000 0000
160: 0000 0000 0000 0000 0000 0000 0000 0000
168: 0000 0001 0000 0000 0000 0000 0000 0000
176: 0000 0000 0000 0000 0000 0000 0000 0000
184: 0000 0000 0000 0000 0000 0000 0000 0000
192: 0000 0000 0000 0000 0000 0000 0000 0000
200: 0000 0000 0000 0000 0000 0000 0000 0000
208: 0000 0000 0000 0000 0000 0000 0000 0000
216: 0000 0000 0000 0000 0000 0000 0000 0000
224: 0000 0000 0000 0000 0000 0000 0000 0000
232: 0000 0000 0000 0000 0000 0000 0000 0000
240: 0000 0000 0000 0000 0000 0000 0000 0000
248: 0000 0000 0000 0000 0000 0000 0000 0000
[peg2ide/ata_read_drive_properties] After-reset signature invalid for unit 1
[peg2ide/ata_read_drive_properties] After-reset signature invalid for unit 3
it8212ide.device 53.22 (28.6.2017)
lsi53c8xx.device 53.22 (28.6.2017)
sii0680ide.device 53.22 (28.6.2017)
sii3112ide.device 53.22 (28.6.2017)
sii3114ide.device 53.22 (28.6.2017)
sii3512ide.device 53.22 (28.6.2017)
[mediaboot] Diskboot is present. Skip mounting static devices.
Mode 640x 480x24 does not fit on board
Mode 800x 600x24 does not fit on board
Mode 1024x 768x24 does not fit on board
Mode 1280x 720x24 does not fit on board
Mode 1280x 800x24 does not fit on board
Mode 1280x 960x24 does not fit on board
Mode 1280x1024x24 does not fit on board
Mode 1440x 900x24 does not fit on board
Mode 1600x 900x 8 does not fit on board
Mode 1600x 900x24 does not fit on board
Mode 1600x 900x16 does not fit on board
Mode 1600x1200x 8 does not fit on board
Mode 1600x1200x24 does not fit on board
Mode 1600x1200x16 does not fit on board
Mode 1680x1050x 8 does not fit on board
Mode 1680x1050x24 does not fit on board
Mode 1680x1050x16 does not fit on board
Mode 1920x1080x 8 does not fit on board
Mode 1920x1080x24 does not fit on board
Mode 1920x1080x16 does not fit on board
Mode 1920x1200x 8 does not fit on board
Mode 1920x1200x24 does not fit on board
Mode 1920x1200x16 does not fit on board
No CMI8738 found!
CS4281 DRIVERINIT
No card present.
[VIA-AC97] Error: soft resume timed out!
No SOLO_ONE found!
No SB128 found!
No FM801 found!
No Envy24 found!
win->RPort->BitMap 6FF0F978
6.Workbench:>

What is sashimi and how do I use it? I'm sorry I've only been dealing with AmigaOs4.1 for 5 months and I still have a lot to learn.

@whiteQuote:

The screen output of 16 bit brings of course very many restrictions, but I am glad that was already helped e.g. with MilkyTacker this works now with the new SDL2 under Qemu Pegasos 2 AmigaOs4.1. I had seen it earlier in one of your videos that you had to patch it. Maybe ScummVM will run soon too....

Quote:

I agree with you the Qemu Pegasos 2 is a really very powerful emulation, I have a lot of fun with them and opening windows ,programs ,tool is really very fast.

Quote:

Hans de Ruiter could probably be the only one to help, he has driven the graphics driver development on the AmigaOs4.1, but it will not be in his interest to support an emulation. I think he will concentrate on real hardware since he is also working with A-EON. But you never know maybe one day something like this will be included in the Enhancer package 2.x I'm dreaming again

@CapehillQuote:

I have now also started ScummVM with this option, then it immediately goes into full-screen mode, which, however, has a black output.

-d9 log:

4.Workbench:> Programme:pre-release/install/scummvm --gfx-mode=surfacesdl
WARNING: You are missing a valid 'translations.dat' file. GUI translation will not be available!
WARNING: generateZipSet: Could not find 'gui-icons.dat'!
WARNING: Could not find theme 'scummremastered' falling back to builtin!
4.Workbench:> Programme:pre-release/install/scummvm --gfx-mode=surfacesdl -d9
Debuglevel (from command line): 9
Reading plugins from plugin directory ''
Couldn't open plugin directory 'plugins'
Couldn't open plugin directory '/usr/local/lib/scummvm'
Using SDL Video Driver "os4"
Invalid joystick: 0
Using SDL Audio Driver "amigaos4"
Output sample rate: 44100 Hz
Output buffer size: 2048 samples
Output channels: 2
WARNING: You are missing a valid 'translations.dat' file. GUI translation will not be available!
HardwareInput with ID 'JOY_START' not known
HardwareInput with ID 'JOY_LEFT_STICK_Y-' not known
HardwareInput with ID 'JOY_LEFT_STICK_Y+' not known
HardwareInput with ID 'JOY_LEFT_STICK_X-' not known
HardwareInput with ID 'JOY_LEFT_STICK_X+' not known
HardwareInput with ID 'JOY_RIGHT_SHOULDER' not known
Setting 640 x 480 -> 512 x 384 -- 1.25
WARNING: generateZipSet: Could not find 'gui-icons.dat'!
WARNING: Could not find theme 'scummremastered' falling back to builtin!
Loading theme builtin
Adding Gui Object 0x6570d5e8 to trash
HardwareInput with ID 'JOY_A' not known
HardwareInput with ID 'JOY_Y' not known
HardwareInput with ID 'JOY_UP' not known
HardwareInput with ID 'JOY_DOWN' not known
HardwareInput with ID 'JOY_LEFT' not known
HardwareInput with ID 'JOY_RIGHT' not known
Setting 640 x 480 -> 512 x 384 -- 1.25
Loading theme builtin
Adding Gui Object 0x65710640 to trash
Delayed deletion of Gui Object 0x6570d5e8
Delayed deletion of Gui Object 0x65710640
4.Workbench:>

@samo79Quote:

You don't have to delete the libraries right away, you could rename them so that ScummVM no longer accesses them.
But the idea is not bad, so you could reproduce the whole thing.

@walkero

Where can I get LiteXL version 2.1.1r1 on Os4Depot does not work and only shows a gray screen.

@CapehillQuote:

I think this could be the problem. I tried with gfx_mode=surfacesdl in the .ini and also without edited .ini.

WARNING: OpenGLGraphicsManager::endGFXTransaction: Could not load any graphics mode!!!

Using SDL Video Driver "os4" -d9 log

Shouldn't Video Driver say "Software"?