Hi nubechecorre,
Exactly
Thanks, what should I do there is a guide for this?
Thanks again.

Hi RIBDEVIL,
thanks for the reply, I read UBoot in the startup of the lnk posted
I thought there might be some variant for amiga FE1 classic systems.
Thank you very much for your reply.

Hi,
I read this:
https://amigaworld.net//modules/featur ... ?op=r&cat_id=4&rev_id=172

I was wondering if this guide was applicable to the final edition classic version 53.71
using winuae to create different multiboot startup-sequences

Thanks for every suggestion.
Thanks again for every help.

Hi,
I did a little E-UAE tutorial to use it with winUAE it works perfectly
Thanks again for all the suggestions and advice received.
The only problem is that if the installer is used, the program hangs during installation.
So to avoid the problem I performed a manual installation that works.
I wanted to ask if it was possible, give this package for those who use winUAE so you can use it since it works very well.
From the package I will remove the kick.rom etc.
Thanks again for a possible answer.

here the video if it can be useful:
https://youtu.be/OME3gjiEHcc
https://youtu.be/YIS7PXDaqz0

Hi zzd10h,
Thanks, I would be very helpful, as soon as things go better for me, I will buy without hesitation, support is important in the development of these applications.
Thank's for your job!

Hi cloverskull,
I do not own an X5000 (unfortunately)
Here is a link with a guide to which I referred, as well as all the advice received here on the forum.
https://amigax5000.blog/2017/08/27/a-f ... assic-mode-optimisations/

In my small using the emulation I installed picassoIV directly, using the "Picasso96 2.1.e" version
But I used the 3.1 did not create me any problem within UAE-SDL

I hope the guide is useful for you.

E-UAE SDL now works
I've done various tests with the SDL version, it works very well with almost all the games and demos written in assembly.
At the moment the X1000 version seems to be faster in some games.

If I can report a few small bugs or anything, I would like it, if it can be useful.
It would be nice to try new beta.

Thanks again!

here a little video while I use the SDL version with 64bit winUAE:
https://youtu.be/d7cvsLLck6A

Hi Petrol,
thank you for your suggestion.
This can also be useful.
But I was looking for something to control the tasks in real time, as Daedalus suggested.
Thanks anyway, any suggestion is always used to learn.

Hi, Daedalus
Thanks for the reply, I downloaded priman 2.0 from aminet version 68k
I read the readme to see how it works.
Thanks again.

Hi,
There is a way with AmigaOS 4.1.1 to assign the priority of the PPC CPU with individual applications.
For example, you can raise or lower the priority of a single process as you do with windows.
Thank you for any suggestions.

@pseudaxos
Thanks again, for the information.
I noticed that disabling the audio in the emulation of winUAE 64bit
(so not selecting any sound card in winUAE, so without emulating the sound)
The killing ground 3D II is fluid and playable.
I will do further tests, however I am happy with the results obtained.
Thank you!

@pseudaxos
Hi, thanks for your suggestions, this helps me to better understand the functioning of UAE.

Do you have a configuration file for The Killing Ground 3D II?

At the moment it is the only game that seems to be very slow.
I understand that for any Amiga machine it has always been the game that required a lot of resources.
By activating the JIT option in UAE-X1000 the LED is operating during the game, so the JIT is activated.

Thanks again you have been very kind.
Mine is just passion for this wonderful machine.

@Raziel
Hi, thanks for the reply.
This helped me to better understand how it works.
Thank you very much.

Hi K-L,
I have read some guides to configure .uaerc_RunInUAE.
I noticed some differences between these guides.
So I'm a bit confused about their use.
Would it be possible to have a configuration file? already done.
To download it somewhere?
It would be much simpler for me to understand the parameters that I can enable.
And then make further tests, even if I use winUAE for me it would be a great help.

At the moment any resolution I choose does not seem to have any impact on performance.

But for me it would be important to have an example file to work on, in this case I could work on a file with the right parameters already set and modify them for my needs.

Thanks again for your answer, and for any help.

Hi,
Before opening this little post, I thought about it a lot.
I hope to get help, I do not own a real amiga machine.
But reading documentations, and receiving the help of many people here on the forum, I was able to gradually configure amigaOS 4.1.1 using winUAE 64bit.
Now it works very well.
I can surf to watch videos and do many other things.

I know the limits of the emulation of 4.1.1, so I do not expect it to work like a real machine.
Over time I started using E-UAE.
There are two UAE and UAE-X1000 executables, the one I use is UAE-X1000
All games work very well, including demos written in assembly.

I do not expect its functioning to be perfect.
While UAE crashes, UAE-X1000 works perfectly in the window and in full screen.

Placed here the .log and my configuration, I ask for help to understand if the configuration is correct.
What I would like to know to learn, and if the parameters are correct.
The emulated machine is a 040 with fast ram.
I have followed some guides to configure these parameters so I do not expect everything to work better, but to understand if the configuration is right, I have to correct some parameters.

I'm sorry, if I put the .log directly and the configuration in the post.
If I have to delete this post because it's too long, I can put them on
on mediafire not to take up space on the forum.

Thanks again for every help!

.log
E-UAE 1.0.0
Build date: Jan 1 2015 18:38:45
Found 0 joysticks
Opening cfgfile '.uaerc'...okay.
unknown config entry: 'sound_max_buff=8192'
Opening cfgfile 'T:RunInUAE.uaerc'...okay.
Error: directory/hardfile 'Sys:Emulation/RunInUAE/WB31' already added
EClock frequency:16.079060 MHz
Rexx port "UAE" installed.
Resetting frame rate hack
Building CPU table for configuration: 68040
1866 CPU functions
Building CPU function table, 46416 opcodes (4 0 0).
JIT: Building compiler function table.
JIT: Allocation of translation cache...
JIT: Translation cache size in prefs: 8192
JIT: Allocated 8192 KB translation cache.
JIT: allocated 1760 KB macroblock buffer.
Resetting frame rate hack
AMIGFX: Using screenmode: 0x50031300:24 (1342378752:24)
AMIGFX: Using a 24-bit true-colour display.
Sound driver found and configured for mono at 44100 Hz, buffer is 10584 bytes.
Driveclick init...
reset at 0
JIT: Compiling reset
PAL mode, 50Hz (h=227 v=312)
chipmem cleared
SERIAL: period=372, baud=9600, hsyncs=16 PC=f8018a
JIT: Change cache emulation: enabled
Fastcard: mapped @$200000: 8MB fast memory
Card 1 (ZorroII) done.
Filesystem: mapped memory @$e90000.
Card 2 (ZorroII) done.
Mounting uaehf.device 0 (0):
FS: mounted virtual unit DH0 (Sys:Emulation/RunInUAE/WB31)
Mounting uaehf.device 1 (0):
FS: mounted virtual unit Amiga_ (Amiga:)
FS: Workbench starting..
FS: Amiga starting..
JIT: Change cache emulation: disabled
PTEST @ 0022338c
JIT: Change cache emulation: enabled
PAL mode, 54Hz (h=227 v=286)
PAL mode, 50Hz (h=227 v=312)
Illegal instruction: 4e7a at 0025da42 -> 0025da52
Illegal instruction: 4e7a at 0025da5a -> 0025dad8
Remote CLI started.
PFLUSH @ 0084a182
PFLUSH @ 0084a188
JIT: Change cache emulation: disabled
JIT: Change cache emulation: enabled
JIT: Change cache emulation: disabled
PFLUSH @ 0084a368
PFLUSH @ 0084a36e
PFLUSH @ 0084b700
PFLUSH @ 0084b700
PFLUSH @ 0084b700
JIT: Change cache emulation: enabled
PFLUSH @ 0084b700
PFLUSH @ 0084b700
PFLUSH @ 0084b700
PFLUSH @ 0084b700
0000 written to DSKDAT. Not good. PC=00849A1A
PFLUSH @ 0084b700
PAL mode, 52Hz (h=227 v=300)
PAL mode, 50Hz (h=227 v=312)
PFLUSH @ 0084b700
PFLUSH @ 0084b700
PFLUSH @ 0084b700
PFLUSH @ 0084b700
PFLUSH @ 0084b700
PFLUSH @ 0084b700
Byte put to custom register DFF05B PC=0086DEDA
Byte put to custom register DFF05B PC=0086DEDA
New max_color_change=750
Byte put to custom register DFF05B PC=0086DEDA
Byte put to custom register DFF05B PC=0086DEDA
Byte put to custom register DFF05B PC=0086DEDA
Byte put to custom register DFF05B PC=0086DEDA
Byte put to custom register DFF05B PC=0086DEDA
Byte put to custom register DFF05B PC=0086DED6
Byte put to custom register DFF05B PC=0086DED6
Byte put to custom register DFF05B PC=0086DED6
Trying on public screen...
AppWindow started.
AMIGFX: Using a 24-bit true-colour display.

.config
# UAE config for RunInUAE, which is designed to modify an existing working UAE config

# Use 3.1 Kickstart for Workbench, but allow ADF-booted games to still use an older Kickstart
kickstart_rom_file=kick3.1.rom

# Emulate an A1200, but still allow A500 emulation for ADF-booted games
cpu_type=68040
cpu_speed=max
chipmem_size=4

chipset=aga
#collision_level=none

# Emulate an expanded A1200 with 8MB of Fast Ram!
fastmem_size=8

# Set frame skipping (1=show all frames, 2=show every 2nd frame, 3=show every 3rd frame, etc)
#gfx_framerate=2

# Add floppy disk which can be used for saving games
floppy0=PROGDIR:SaveGames.adf

# Filesystem settings for virtual devices
filesystem2=rw,DH0:Workbench:Sys:Emulation/RunInUAE/WB31,1
filesystem2=rw,DH0:Workbench:Sys:Emulation/RunInUAE/WB31,1
filesystem2=rw,Amiga_:Amiga:Amiga:,-0

Example .config Breathless AGA
#RUNINUAE: LOCAL_VERSION=2
floppy_speed=800
cachesize=8192
gfx_width_windowed=640
gfx_height_windowed=480
gfx_lores=false
gfx_correct_aspect=yes
gfx_linemode=double
gfx_framerate=2
amiga.screen_type=ask
gfx_fullscreen_amiga=true
joyport0=kbd3
collision_level=none
#RUNINUAE: SCREENMODE=ScreenMode_HiRes.prefs

Here small video
https://www.youtube.com/watch?v=PBXHanDwaLw

@ K-L Hi,
Sorry if I come back to this topic.
I look for alternative solutions, so I apologize for the question.
Use Odissey with this user agent:

Mozilla / 5.0 (BB10; Kbd) AppleWebKit / 537.35 + (KHTML, like Gecko) Version / 10.3.3.2205 Mobile Safari / 537.35 +

BlackBerry user agent
I modified user-startup with this:
SETENV OWB_USER_AGENT "Mozilla / 5.0 (BB10; Kbd) AppleWebKit / 537.35 + (KHTML, like Gecko) Version / 10.3.3.2205 Mobile Safari / 537.35 +"

The video is perfectly visible in Odyssey and also the audio, I can go back and forth with the video, there is no crash.

I think it's the .3gp format, I expected a greater fluidity instead and how to watch it normally.
Is it possible to associate the .3gp with odyssey, could it go faster?

I read above the answer, but with this user agent it seems to work fine.
I always use YT.rexx and it works perfectly.

I wondered if there could be any solution by setting the MIME or something else.

Thank you for every answer or suggestion.
Thanks again.

@LiveForIt
Hi, you're right, I'm sorry.
I prepare the questions carefully, thanks again for your patience.
I open a thread.
Thank you!

Hi,
I'm glad, UAEx1000 works very well.
In full screen and in the window all games tested are very fluid.
The script is still to be defined better but the result is reached.
Apart from The Ground 3D killing 3D II, but it was always a game that required a lot of hardware resources.
I use winUAE, I would like to understand if possible, how to use 68k applications
Where can I find documentation with some examples?
To do some tests.

Thanks, I hope to have some suggestions.
Thanks again for your patience.

here a little video:
https://youtu.be/PBXHanDwaLw

Hi,
I found this site:
https://amigax5000.blog/2017/08/27/a-f ... assic-mode-optimisations/
It was the documentation I was looking for, to carry on my experiments.
I do not own an X5000
But I wanted to know if I can actually install the 3.xx workbench
in a folder, or in a dedicated partition as explained on the site.
I understand that I will have several crashes, and maybe nothing will work.
It does not matter to me.
I just wanted to know if some applications like NetSurf 68k can be launched directly through "Petunia" once the workbench is installed.
Thanks for any suggestions and advice on this topic.
Thanks again.

@Rigo
Hi, thanks to the update was made directly to version 2.45 without problems.
I just wanted to ask, I usually find NetSurf not updated, because I always use the latest beta.
Now he only gave me "german.catalog" to update.
Thank you so much for your work