It can be a problem with your microsd card that contains the uboot.
The x5000 will power off almost instantly if it can not read the card.
So you can try to unplug the card and stick it back in again or try another card.

Is this after loading the kickstart modules or when booting uboot?

A serial debug log is probably needed.

Hell yes :)

As it already been said you need the version from the enhancer package.

Isn't all X5000 bundled with it? so it should be no problem.
iirc the enchancer installer will not add it to your kicklayout so you have to add it yourself.
Also remember to install and add diskcache.library.kmod from the same package as it will boost the sfs performance.

The RadeonRX driver

@AmigaBlitter

How is it going? :D

@LiveForIt

That's very good ideas for improvements for euae that you got there but regarding locking the mouse inside the window.

Have you tested the ctrl+alt+g key combination?

I'm not infront of my amiga now so i might remember the wrong combination and i might have misunderstood what you want.

No problem playing the file here on X5000.

I would try to disable the soundcard driver or replace the soundcard if i had a problem like that.

@Antique

I bought My card at a local store ~5 years ago without knowing if it would work or not.
Luckily it did work.

It was a gigabit tp-link card.

@Antique

I would go for a card that works with the 8169 driver instead.

The performance difference was huge in My x5000

@ktadd

Hollywood programs compiled with older versions of hollywood will need to be recompiled.
I guess it was a bug in hollywood since a fix was done to hollywood 8.x or something.

I have already contacted PEB who did a-ftp server and he sent me a fixed version of a-ftp.
Hopefully he will put it up on OS4depot.

You should try to contact the author behind fontwalker and ask if he can do a recompile.

@NinjaCyborg

And you will probably get conflicting replys about what version to use also :)

But i say go for the 1.0 sdl build.

I use a Noctua NF-R8 17.1dBA 1800RPM fan and get's about 60C.
The fan size is 80x80mm so i used my $99 3d-printer to print out a 60->80mm fan adaptor.

Btw, Nice script!

No special drivers are required to use a voodoo3 and a mediator under os4.

@Raziel

You are looking at the wrong config file.
.uaerc_RunInUAE is the config file to fiddle with in this case and the settings are quite good. :)

But as i said in my previous post when setting the cpu_type to 68040 the jit-led is green in AB3d TKG.

@Cass


So your problem is that the jit-led is red or that the game does not run at all?
I just tested AB3d2 from whdownload.com and the jit-led was red for me also but it worked and runs good on my X5000.

Then i tested to set the cpu_type to 68040 and now the jit-led is flashing green.

@magnetic

And why was it a mistake to update Ppaint??

@Paul

What filesystem do you use on the partition where TW is located?

TW still works on all os4 systems that i have tested it on including X5k.
iirc the public version of NGFS for X5000 did not work with TW so you better install it into a partition with sfs and then it should run.

@Paul

So the drives you want to mount is formated with sfs?
Hyperion was unable to acuire a licence of sfs for the X5000 but Aeon did eventually convince Joerg to sell them a licence so SFS ended up in the enhancer package but iirc you need to add it to your kicklayout file and then you can use SFS.

So check the version of sfs in the kickstart directory.
It should be
7.Workbench:> version Kickstart/SmartFileSystem full
SmartFilesystem 1.293 (2015-11-19)
AmigaOS4 PPC A-EON Technology Ltd

Then add these two lines to sys:Kickstart/Kicklayout

MODULE Kickstart/diskcache.library.kmod
MODULE Kickstart/SmartFileSystem

It looks to me like a legit MAC address.
I would have been more concerned if it was nulled so i think this is a dead end :(