Forums - All Posts - The Amigans website

Forum Index

Board index » All Posts (smarkusg)

Bottom

« 1 (2) 3 4 5 ... 14 »

smarkusg

Re: Pegasos2 with RadeonHD/RX via bridge

Posted on: 4/20 9:44 #21

Not too shy to talk

@kas1e


QZFQZFQZFQZFQZFQZFQZFQZFQZFQZFQZFQZFQZFQZFQZFQZFQZFQZFQZFQZFQZFQZFQZFQZFMemory Config Done

Configuring PCI0...                                                    Done.

Configuring PCI1...                                                    Done.

Configuring ETH...                                                     Done.

Releasing IDE reset ...                                                Done.

Configuring Legacy Devices

Initializing KBD...                                                    Done.

Testing 40000000 Bytes, Pass: 00000000 Failed: 00000000

RAM TEST (fill random)...                                              Done.



SmartFirmware:

cpu0: PowerPC,74x7 CPUClock 1533 Mhz BUSClock 133 Mhz (Version 0x8002,0x0102)

no/bad nvramrc - performing default startup script

channel 0 unit 0 :   ata | QEMU HARDDISK                            | 2.5+    

ATA device not present or not responding

channel 1 unit 0 : atapi | QEMU DVD-ROM                             | 2.5+    

ATA device not present or not responding







Welcome to SmartFirmware(tm) for bplan Pegasos2 version 1.2 (20040810112413)

SmartFirmware(tm) Copyright 1996-2001 by CodeGen, Inc.

All Rights Reserved.

Pegasos BIOS Extensions Copyright 2001-2004 by bplan GmbH.

All Rights Reserved.

entering main read/eval loop...

ok ls hd:0

.

..

lost+found

config-3.16.0-6-powerpc

vmlinux-3.16.0-6-powerpc

initrd.img

vmlinuz

cuImage.amigaone.img-3.16.0-4-book3s-amigaone-smp+

System.map-3.16.0-4-book3s-amigaone-smp+

build_uboot_image.sh

vmlinuz.old

cuImage.amigaone.elf-3.16.0-4-book3s-amigaone-smp+

boot.img.amigaone-3.16.0-4-book3s-amigaone-smp+

config-3.16.0-4-book3s-amigaone-smp+

vmlinuz-3.16.0-6-powerpc

initrd.img-3.16.0-4-book3s-amigaone-smp+

vmlinux

cuImage.amigaone-3.16.0-4-book3s-amigaone-smp+

initrd.img-3.16.0-6-powerpc

vmlinux-3.16.0-4-book3s-amigaone-smp+

System.map-3.16.0-6-powerpc

vmlinuz-3.16.0-4-book3s-amigaone-smp+

ok

Maybe if you have some free disk install on it from scratch.
As you wrote you only need it for the test so it's a shame if you make yourself something with the actial partitions ma Pegasos
I don't remember if Pegasos required a boot partition as the first one, but I guess it shouldn't matter to list it with "ls"

Edited by smarkusg on 2024/4/20 9:59:58

Topic | Forum

smarkusg

Re: Pegasos2 with RadeonHD/RX via bridge

Posted on: 4/20 8:51 #22

Not too shy to talk

@kas1e

But the kernel loads for you, so you set it right.
root is missing, which is the partition where you have the system. - Maybe you have the wrong partition, not the right one.

In the log you have "console=tt" I pasted it wrong or did you pass it like that?

edit:

unless initrd can't load .... then on kernel and initrd you have on FFS partition yes ?
my boot/ext2 partition has 100MB

what possibility you have make a small partition ext2 and copy the kernel and initrd there and see if it boots up

Topic | Forum

smarkusg

Re: Pegasos2 with RadeonHD/RX via bridge

Posted on: 4/20 8:10 #23

Not too shy to talk

@kas1e
If you use only this command line it is possible that nothing will be displayed if the system is not configured.

"boot hd:5 boot/vmlinuz root=/dev/sda6"

add to which console you want the tty to spit out the log and add fb

my line " boot hd:0 vmlinuz-3.16.0-6-powerpc root=/dev/sda2 video=uvesafb:1680x1050-32, console=tty0"

I have boot partition ext2 and root ext4 everything boots and it doesn't matter that I use QEMU.

Topic | Forum

smarkusg

Re: MPlayer 1.5 released!

Posted on: 4/14 22:28 #24

Not too shy to talk

@Maijestro

You can try to directly access the ffmpeg libraries from mplayer via ffmpeg:// and add -cache
It seems to me that this will not work anyway.
If you have the ability to use emotion or ffplay use these programs.

I have no way to check because these stream as "pjs" wrote is for my region/country is blocked.

Topic | Forum

smarkusg

Re: Qemu Pegasos II interrupts issue

Posted on: 4/13 20:38 #25

Not too shy to talk

@balatonQuote:

I can't tell if Linux doesn't do that elsewhere or it does not need to because it can handle shared edge triggered interrupts (probably the latter) but this also does not matter for AmigaOS on an uncommon PPC board what does Linux do on x86.

I checked the stability of the network connection on QEMU (8.1 as I remember correctly ) Linux/debian pegasos2 and A1XE. The kernels were from the 3.x and 4.x series.
I even compiled one myself under A1XE (I wanted to check sm502).
Everything worked properly. Sessions of 2h using audio stream and running mplayer in the background.
Based on this, I can say that QEMU emulation with pegasos2 and A1Xe machines using orginal uboot/firmware worked.
The AOS4 system using the original uboot/firmware did not....

edit:
I found a post even on the forum

https://www.amigans.net/modules/newbb/ ... id=143474#forumpost143474

Then I also still had some fun with those Linux on Peg and A1

Topic | Forum

smarkusg

Re: Cannon fodder open source

Posted on: 4/11 22:48 #26

Not too shy to talk

@AmigaOldskooler

Thanks.
I hope you will have fun ..as I did. I discovered over the years that this game is not as easy as it used to be

Topic | Forum

smarkusg

Re: What the fastest possible x64 emulation way of OS4 today ?

Posted on: 4/10 19:37 #27

Not too shy to talk

@balaton

Quote:

I'd still need the lspci or showconfig output from a real Sam460 as I've asked above to confirm it's the right fix but seems to resolve the problem at least for now

I don't know too many people who have a real sam460, but if no one answers, I'll try to ask around and let you know @.

Topic | Forum

smarkusg

Re: What the fastest possible x64 emulation way of OS4 today ?

Posted on: 4/10 19:04 #28

Not too shy to talk

@balaton

I saw that you posted a patch for "ppc440_pcix.c" yesterday.
I checked quickly Qemu with sam460.I plugged in a disk image with SFS initializes and works.

I have SFS with ES - version 1.293
Qemu version 9 RC1
Thank you

Topic | Forum

smarkusg

Re: MPlayer 1.5 released!

Posted on: 4/4 23:54 #29

Not too shy to talk

@sailor
Maybe try some mp3 encoder , lame for starters.
A few months ago I tried to do something with the ffmpeg compilation from this guide
that you provided in that https://www.amigans.net/modules/newbb/ ... id=147361#forumpost147361
But without the physical hardware, it's like a telephone consultation with an ophthalmologist

I see nothing he sees nothing and you get a prescription sore throat even though you need glasses...

Topic | Forum

smarkusg

Re: Cannon fodder open source

Posted on: 3/31 23:16 #30

Not too shy to talk

@LiveForIt
I only corrected a few bugs and moved to the new version 1.8. salass00 did most of the work. He left out a few bugs.
Ports are ports... anyway, most credit goes to the authors of the original versions.

Topic | Forum

smarkusg

Re: Cannon fodder open source

Posted on: 3/31 22:00 #31

Not too shy to talk

Hi

AmiWest 2024's theme of "Get your game on!". Games were the backbone of the Amiga platform.
There was no native Cannon Fodder after AOS4. With help came an open port of Open fodder.... and @salass00's work on the previous port.
Plus the help of @Javier and @Samir
Thanks guys!!!

https://github.com/smarkusg/openfodder/releases/tag/31032024

If anyone found any bugs before publishing on os4depot thanks in advance for your help

* full version of Cannon Fodder is required to make the port fully functional

version with full installation of the original cannon fodder

Edited by smarkusg on 2024/3/31 22:22:09

Topic | Forum

smarkusg

Re: mplayer and VA.library

Posted on: 3/30 19:11 #32

Not too shy to talk

Hi

In recent months, a new version of mplayer 1.5 has been released, building on the work of previous releases of this program under AOS4.
New things have been added and some things have been improved. From the beginning, the idea was that mplayer could also use the va-api video output.
For a few months now, we have been testing a solution based on the mplayer port under Linux, where there is a vaapi video output.
To make it work, we need to undo some changes in the ffmpeg code and add the code to mplayer. Changes to ffmpeg and mplayer alone will not make it work. It was also necessary to adapt the va-api implementation to work with the existing va-api version under AOS4.

Lastly, mplayer and ffmpeg itself appears to work under AOS4. The only problem is the video output. The video output in mplayer itself is on X11.
For testing, a simple output was made to simulate operation under AOS4. What is missing is for this output to be rewritten/re-written in order to lastdznie confirm the operation.
Here is my request, is there any person who could help with this ?

Example log from mplayer vaapi output under AOS4 where you can see


MPlayer -vo vaapi -ao null PRUEBAS:Big_Buck_Bunny_1080_10s_30MB.mp4 

MPlayer SVN-r38448-snapshot (C) 2000-2024 MPlayer Team



Playing PRUEBAS:Big_Buck_Bunny_1080_10s_30MB.mp4.

libavformat version 60.16.100 (internal)

libavformat file format detected.

[lavf] stream 0: video (h264), -vid 0

VIDEO:  [H264]  1920x1080  24bpp  30.000 fps  24559.9 kbps (2998.0 kbyte/s)

[vaapi] initialised (API version 1.5).

==========================================================================

Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family

libavcodec version 60.31.102 (internal)

Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)

==========================================================================

Clip info:

major_brand: isom

minor_version: 512

compatible_brands: isomiso2avc1mp41

title: Big Buck Bunny, Sunflower version

artist: Blender Foundation 2008, Janus Bager Kristensen 2013

composer: Sacha Goedegebure

encoder: Lavf57.63.100

comment: Creative Commons Attribution 3.0 - http://bbb3d.renderfarming.net

genre: Animation

Load subtitles in PRUEBAS:

Audio: no sound

Starting playback...

Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.

VO: [vaapi] 1920x1080 => 1920x1080 H.264 VAAPI acceleration 

[vaapi] hardware supports codec: format H.264 VAAPI acceleration -> VAProfile 7.

[vaapi] context initialised: config 0x1, context 0x14.



[h264 @ 0x436e86a8]Using deprecated struct vaapi_context in decode.

Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.

VO: [vaapi] 1920x1080 => 1920x1080 H.264 VAAPI acceleration 

[vaapi] OSD drawing is not supported.

--

For comparison, here is the log from mplayer vaapi under Linux


MPlayer SVN-r38423-snapshot-12 (C) 2000-2023 MPlayer Team

do_connect: could not connect to socket

connect: No such file or directory

Failed to open LIRC support. You will not be able to use your remote control.



Playing /home/markus/Wideo/2020/2020-03-04_09-49-20.mp4.

libavformat version 60.3.100 (internal)

libavformat file format detected.

[mov,mp4,m4a,3gp,3g2,mj2 @ 0x556a3bdac2c0]Protocol name not provided, cannot determine if input is local or a network protocol, buffers and access patterns cannot be configured optimally without knowing the protocol

[lavf] stream 0: video (h264), -vid 0

[lavf] stream 1: audio (aac), -aid 0, -alang eng

VIDEO:  [H264]  1280x720  24bpp  45000.000 fps  14004.9 kbps (1709.6 kbyte/s)

libva info: VA-API version 1.14.0

libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so

libva info: Found init function __vaDriverInit_1_6

libva info: va_openDriver() returns 0

[vaapi] initialised (API version 1.14).

==========================================================================

Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family

libavcodec version 60.3.100 (internal)

Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)

==========================================================================

Clip info:

 major_brand: mp42

 minor_version: 0

 compatible_brands: isommp42

 creation_time: 2020-03-04T08:49:20.000000Z

 location: +50.3001+018.8347/

 location-eng: +50.3001+018.8347/

 com.android.version: 7.1.2

Load subtitles in /home/markus/Wideo/2020/

==========================================================================

Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders

AUDIO: 48000 Hz, 2 ch, floatle, 96.0 kbit/3.12% (ratio: 12000->384000)

Selected audio codec: [ffaac] afm: ffmpeg (FFmpeg AAC (MPEG-2/MPEG-4 Audio))

==========================================================================

couldn't open play stream: Device or resource busy

ao2: can't open sndio

[AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or directory

AO: [alsa] 48000Hz 2ch floatle (4 bytes per sample)

Starting playback...

Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.

VO: [vaapi] 1280x720 => 1280x720 H.264 VAAPI acceleration 

[vaapi] hardware supports codec: format H.264 VAAPI acceleration -> VAProfile 7.

[vaapi] context initialised: config 0x1000000, context 0x2000000.



[h264 @ 0x556a3bdd1de0]Using deprecated struct vaapi_context in decode.

Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.

VO: [vaapi] 1280x720 => 1280x720 H.264 VAAPI acceleration 

[vaapi] OSD drawing is not supported.

thank you in advance for your help

Topic | Forum

smarkusg

Re: Hi New Member Here

Posted on: 3/27 22:09 #33

Not too shy to talk

I hope I am not too late ...
A very warm welcome to you !

Topic | Forum

smarkusg

Re: Sam460 which file systems can be used

Posted on: 3/2 20:36 #34

Not too shy to talk

@balaton

Quote:

Maybe the AmigaOS lsi scsi driver is not init'ing/using these cards properly as the Linux drivers do or does something that works on real card >but QEMU is not emulating as the Linux and other OS drivers don't do that?

I would be more in favour of saying that lsi53c810 under qemu was written for specific machines.
It was certainly not done on purpose, but some of the code may have been omitted because the author decided it was not used/needed for a particular system and driver- and rightly so
Quote:

>The assert means that the condition should be true. If it's not then there's a problem somewhere, either the guest sent some unexpected commands >or there's a problem with emulation. Commenting the assert won't help as it's there to make sure it won't break later.

I wrote with exclamation marks that it was a test and I would never leave it like that in my life The test was successful because it showed that AOS is able to work with its lsi53c810 driver, making the correct drive data available.

Unfortunately, I am unable to debug this problem. I hope you find a solution

Topic | Forum

smarkusg

Re: Sam460 which file systems can be used

Posted on: 3/2 14:29 #35

Not too shy to talk

@balaton
Quote:

you could do by replacing nonvolatile.library to use nvram/nvrom.txt as @joerg said

After reading lsi53c8xx_dev.doc I changed the card identification in the qemu sources.
In the documentation it even says that the cart "0x0001" should work but requires lsi53c8xx_override 0001
I have not touched anything in the system. I especially didn't want to change anything in the CD.
I wanted sam460 to behave as if it already had the correct card inserted at the start.

Topic | Forum

smarkusg

Re: Sam460 which file systems can be used

Posted on: 3/2 12:08 #36

Not too shy to talk

@joerg
I did as you wrote.
QEMU Sam460 and Pegasos(pegasos.rom) when trying to initialise after loading the kernel and AOS4 modules from the cd it crashes.


--

 in lsi_do_command(LSIState *s)

 ..

 assert(s->current == NULL) 

 --

EMU launch command line Sam460


-machine sam460ex -rtc base=localtime -drive if=none,id=cd,file=Sam460InstallCD-53.58.iso,format=raw  -device ide-cd,drive=cd,bus=ide.1  -device lsi53c810,id=scsi0 -device scsi-hd,drive=scsi-drive,bus=scsi0.0,channel=0,scsi-id=0,lun=0 -drive file=lol.hdf,if=none,id=scsi-drive,if=none,format=raw

!!!Just for a test I did a rem "assert"!!!
sam460 sees the card and the disk. The problem is on the QEMU side. Most people from what I have seen are tuning the lsi53c810 to run linux via QEMU. It is possible that no one has tried this on AOS before and it doesn't work and the lsi53c810 itself in QEMU needs to be checked.

Pegasos bboot hangs on something like this and booting AOS4 (debug) is stopped


--

[peg2ide/init_port] Port 1 task started

[peg2ide/dev_init] All done

lsi53c8xx.device 53.22 (28.6.2017)

[lsi53c8xx/dev_init] Found chip #0

[lsi53c8xx/ide_initchip] Waiting for devices to spin up..

[lsi53c8xx/init_port] ---> Port 0

[lsi53c8xx/scsi_scan] Scanning SCSI bus...

--

Topic | Forum

smarkusg

Re: Sam460 which file systems can be used

Posted on: 3/1 14:56 #37

Not too shy to talk

@joerg

Thank you very much for your help !!!

I will check in the evening when I have more time and let you know SFS on lsi53c810 in QEMU/sam460 works.

EDIT:
On qemu sam460 i have crush.... looks like some kind of problem with qemu
Assertion failed: (s->current == NULL), function lsi_do_command, file lsi53c895a.c, line 866.
zsh: abort /tmp/z2/bin/qemu-system-ppc -machine sam460ex -rtc base=localtime -drive

Edited by smarkusg on 2024/3/1 23:14:11

Topic | Forum

smarkusg

Re: Sam460 which file systems can be used

Posted on: 3/1 12:59 #38

Not too shy to talk

@balaton

SCSI (LSI/NCR/SYM 53c8xx) works but AOS4 (lsi53c8xx.device.kmod) doesn't seem to support this model of card is in QEMU.
uboot sees the card and the board but, it even loads the system boot .... and that is the end.

edit:
Here the command line


-machine pegasos2 -rtc base=localtime -m 1024 -bios ./pegasos2.rom -serial stdio   -vga none  -device sm501 -device lsi53c810,multifunction=on,id=scsi -drive file=Pegasos2InstallCD-53.54.iso,id=scsi_iso,if=none -device scsi-cd,drive=scsi_iso

I checked on pegasos with rom and bboot because I have this emulation currently available

Edited by smarkusg on 2024/3/1 14:58:46

Topic | Forum

smarkusg

Re: Sam460 which file systems can be used

Posted on: 2/29 22:58 #39

Not too shy to talk

@balaton

Quote:

0x1302 not 0x1320.

0x1302 not 0x1320 - yes meant that value what you gave. I misspelled the values . Thanks for the explanation

qemu 8.1 also sfs not working

Topic | Forum

smarkusg

Re: Sam460 which file systems can be used

Posted on: 2/29 22:34 #40

Not too shy to talk

@joerg @balaton

One more question
in Linux kernel regarding pvr for 460ex rev. B is set 0x13202004
i checked out of curiosity setting such value in qemu and AOS got up.
I also checked for certainty by setting a random value and AOS did not boot - so I set everything right. uboot was also initialized without any problem

As I understood the pvr mask 0x1320 applies to 4xx series porceosrs.
This means that for AOS it does not matter pvr only in specific programs that try to check it ?
thank you for your reply

Topic | Forum

Top

« 1 (2) 3 4 5 ... 14 »