@portarinos

FFS2 is slow, SFS is fast, thats all it is.

If you leave it long enough timberwolf will start, and it only takes that long on the first go. Using SFS it would take max 5 minutes iirc.

@portarinos

what file system are you using? FFS2? SFS? if its FFS2 it will take a looooong time ( almost 30 mins iirc)

@MickJT

picture

sil 3132

example of pci-e card to buy

@MickJT

The linux screenshots on the acube website show the sam460 using a pci-e 1 sata to 2 sata port board. hopefully acube will have an aos driver and uboot support for that.

@Antique

Quote:

http://en.wikipedia.org/wiki/Digital_video_recorder

@Helgis

its was also running at 1.6GHz at one point, and that isnt going to be the final speed either.

@Helgis

it runs at 1.8Ghz. you've seen the a-eon website yes?

wishing it was 2GHz, or 10GHz doesnt make it true.

@nubechecorre

yes. that has been on the a-eon website since it started listing specs.

@ChrisH

It should be noted, that anyone wanting to post bugs here *please* also produce a step by step guide to reproduce it, and preferable on a default OS4.1 update 2 install. The more details you can give the better it is, dont worry about taking up space on the forum.

Other OS4 devs can then confirm if it is a bug, and add it to the 'list'.

@unimon

dont be silly, I can order sdram and even edo ram if i want, and recieve it in a few days.

for sata i doubt the hard drives people have can reach sata-1 speed, let alone sata-3, unless they have a really nice SSD or RAID

@DaveP

I'm very worried too, and probably for the same unsaid reason as you are

@COBRA

i have no idea why i put the L1 cache instead of L2 heh. obviously thinking about something else

@Troels

440ep vs. 460ex MHz for Mhz, you wont notice any difference apart from where the 64Kb cache comes into play.

the plus points are the PCIe slots, 2gig ram max, and speeds just past 1 GHz.

also, time to dig out that sata pci card you have in your amigaone so you can add cd/dvd drive as well as extra hd's.

@328gts

Quote:

that will just mean people will call it a preorder scam.

you cant win.

giving an email address to register interest so a-eon can email everyone when its available is a good option though

@Hans

Open-Source ATI R600/700 Mesa 3D Performance

link

@retro

there is no AmigaOS hardware that has USB3, and hardly anything that uses USB3 to the full. Why would you want drivers for that instead of USB2? i just dont understand...

@Caveman

http://en.wikipedia.org/wiki/Power_Architecture#Power_ISA_v.2.04

@shortcircuit

# ATX Formfactor
# Dual-core PowerISA? v2.04+ CPU
# "Xena" XMOS XS1-L1 128 SDS
# 7.1 channel HD audio
# 4x DDR2 RAM slots
# 10x USB 2.0
# 1x Gigabit Ethernet
# 2x PCIe x16 slots (1x16 or 2x8)
# 2x PCIe x1 slots
# 1x Xorro slot
# 2x PCI legacy slots
# 2x RS232
# 4x SATA 2 connectors
# 1x IDE connector
# JTAG connector
# 1x Compact Flash

and...

* APM 83290 ? The first implementations of the Titan core design. Two 1.5 GHz cores with FPU, 512 kB shared L2 cache, DDR2 controller, security engine, multi-channel DMA and I/O engine for gigabit Ethernet, PCIe, USB, RapidIO and/or SATA. It began sampling in October 2009 [1]. The processor is aimed at telecom and control plane applications. It is built using TSMC's 90 nm bulk CMOS fabrication to reduce cost.[2]

@Antique

Quote:

some info on SSD's http://forums.overclockers.co.uk/showthread.php?t=18040306

@Mrodfr

Quote:

its starcraft, as broodwar is the expansion which is not supported yet.

even starcraft isnt fully supported yet