Wow! This way beyond my expectation's.

29 replys in such a short amount of time. This shows that the Amiga isen't even near death. Thank's for all help!
I'm recommending this site to all of my Amiga friends.

Today I own the following Amiga models:

Amiga 500 * 4
Amiga 600HD
Amiga 3000D
Amiga 4000D
Amiga 1200
Amiga 1200T (Infinitiv)

This is my own little treasure of a computer like no other.

Thank's again!

BR Jerry.L

Actually I did make a sort of sqeaky woman like sound when it started to work again ;) ....

Ok...

Will try this. It would be great if I got it to work. =)
There is quite a difference with it on even though its only 10Mhz difference, but there's also the extra ram memory.
Is it possible to run it whitout the ram memory?

Hi again =)

I removed the originally fitted memory expansion card so that the Amiga became "original". And connected the composite cable. And then suddenly after 2 restarts it suddenly worked again. But there was no picture from the rgb connection.
Then I reconnected the memory expansion card and tada! everything worked fine?... I do wonder if something happend when I fitted the Accelerator card cause u need to push quite hard to get it in place. Anyway it works fine now and I know there's something wrong with the Accelerator card. There's no response from the Amiga when it's fitted. To bad... but I'm thrilled that it works again. Thank you all!!


(By the way the caps-lock only flashed once)


BR Jerry.L

Hi again!

Thank you all for your answer's and tips.

Then again I actually used an A500 powersupply and it was running fine. Until I plugged the accelerator card in. Before everything worked perfectly. I removed the accelerator card and reinstalled the memory expansion card that was fitted there originally (when everything worked fine). But now there's no disc activity and the screen is black. When I try to reboot CRTL+A+A the Caps lock lit's up for a second but the power light dosen't dim down as it usually do when u reboot.
And the black screen dosen't even flicker.

I havent tried the Composit connection yet though.
But the rgb connection worked fine as well before.

I turned on the computer for like 10 seconds with the accelerator card installed, the screen stayed black then I removed it and the screen stays black and there's no disc activity.

I tested my powersupply with my A600 and it worked fine.

The thing is that it was running fine just before i plugged the accelerator in. Could the ROM chips been taking damage?

Hi!

I tested my Blizzard 1230 accelerator on my recently bought A1200. When I turned the power on the power led is lit up but the disk drive dosent start to "tick" and the screen is all black. I removed the accelerator and turned the power back on. But the screen is still black. Have I ruined my new Amiga? My thought's are that I fried the CPU or the IO chip. And if I did is it possible to buy an 680020 processor today or the IO chip? I don't know where to start.
Please help me!