@RIBDEVIL
Coño si llego a fijarme en tu "firma" te lo digo en espanglish

no its REAL!!!! and works fine, as previous version did.

RadeonHD.chip 0.55 ( 4-02-2013)
PCIGraphics.card is the same as previous one.

THX AEON & cia

Uboot version?
mine: ver=U-Boot 2010.06.05a (Jan 30 2012 - 16:06:56)

Can you post your uboot envvars?
don't know if such envvar has effect on AmigaOS/SAM (pcie_mode=RP:RP)

Didi you check such card here:
RadeonHD compatibility

..
TI Radeon HD 6570 1GB DDR3 (HD5670-PCIE-1024PB) Turks 0.49 Partial User reports that it only works when a DVI to VGA adaptor is used

HIS Radeon HD 6570 2GB DDR3 Turks 0.49 Failed No output to monitor obtained, but AmigaOS does boot in the background
..

Can you check such card on a PC?

I had the same problem with my HD6570 and to solve I
just plugged the vga cable onto the onboard SM502 and boot from CD, then copy/replace with "old" PCIGraphics.card (V53.3 or V53.5 are OK) and when I got/downloaded ATI RadeonHD V0.53 (or latest available now) and replaced it too.

IIRC is PCIGraphics.card V53.4 fault, try to use/revert to "old" V53.3.
First check what version do you have (and post it here if you want).

The problem with ATI HD series and RadeonHD.chip is that V0.23 (or was it V0.19) doesn't recognize HD5000 and HD6000 series AFAIAK and thus you need RadeonHD.chip V0.54 (buy it from AEON website or ACube) to see your Workbench screen.

with new ArcEm_OCM OCM ENABLED:
SICK V1.28
(Please mail result file to M.Seifert@t-online.de)

.---------------.
| Result Values |
'---------------'
&00000134 &00000080 &000000A4 &00000137 &000000A0 &00000000
&001E2B7C &00004E1E &00007FF8 &01000000 &008DCCC8 &FFFFFFFF
&FFFFFFFF &00008000 &00000200 &00000000 &00000000 &00000000
&036E0D4C &00000000 &00000000 &00000000 &00000000 &FFFFFFFF
&FFFFFFFF &FFFFFFFF &FFFFFFFF &FFFFFFFF &FFFFFFFF &FFFFFFFF
&FFFFFFFF &FFFFFFFF &FFFFFFFF &FFFFFFFF &FFFFFFFF &00000001
&00000000 &00000000 &00000000 &00000000 &41560300 &00000003
&00000000 &00000000 &FFFFFFFF &0000011F &000C0300 &00000000
&00FF0000 &00000D95 &FFFFFFFF &00000001 &00000050 &FFFFFFFF
&000000FF &00000004 &00000280 &000001E0 &00000040 &00006257
&00118AC3 &00004000 &00C560B1 &00000064 &373B604F &0891C000
&0080F554 &06144000 &0080539F &0566D000 &0080670E &04155000
&00800C70 &03E67000 &00802A67 &01356000 &0080E82A

.-----------.
| Guesswork |
'-----------'

Computer model: Acorn A3xx

.-----------.
| Processor |
'-----------'
Type: ARM3, rev. 0
Architecture version: ARMv2a
Designer: Acorn Computer
Implementor: ARM
Manufacturer: VLSI
Clock rate: 2.4555 MHz

Processor bugs:
RRX: No
Mode change: No
LDM^: No
LDM/STM: Yes
STM^: No
Istream abort: ?
LDMIB: -
MSR: -

Floating point handler: Old FP-Emulator
FP emulator version: 2.87

Floating point hardware: None


.--------.
| Memory |
'--------'
DRAM size: 16 Mbytes (reported by OS)

VRAM size: 0 bytes (reported by OS)

ROM size: 2 Mbytes
Low ROM access time: 450 ns
High ROM access time: 325 ns

.-------------.
| Frequencies |
'-------------'
IOC timer frequency: 1.977 MHz
IOC timer 0 setting: &4E1E (100.01 Hz)
IOC timer 1 setting: &7FF8 (61.048 Hz)

Memory clock: 9.293 MHz (reported by OS)

.--------------------.
| System Performance |
'--------------------'
Integer: 2533.214 Dhrystones/sec
(1.442 Dhrystone 2.1 MIPS)
(0.587 Dhrystone 2.1 MIPS/MHz)

Floating point: 21.58340 kWhetstones/sec
(0.02158 MWIPS)
(0.00879 MWIPS/MHz)

Memory access:
Cache read: 32.45 Mbytes/sec
(13.9 bytes/CPU clock tick)
Cache write: 23.13 Mbytes/sec
(9.88 bytes/CPU clock tick)

Main memory read: 20.54 Mbytes/sec
(2.32 bytes/Memory clock tick)
Main memory write: 15.57 Mbytes/sec
(1.76 bytes/Memory clock tick)

Screen memory read: 14.86 Mbytes/sec
(1.68 bytes/Memory clock tick)
Screen memory write: 4.578 Mbytes/sec
(0.517 bytes/Memory clock tick)

.-----.
| ICs |
'-----'
Memory controller: MEMC1

I/O chip: VL1772

Videochip: VIDC1a (reported by RISC OS)

Special functions chip: None

Real time clock: Philips PCF8583
I²C address: &A0
Reference clock: 32.768 kHz (configured)

LCD controller: None

Battery management unit: None

.-------------.
| Screen mode |
'-------------'
Resolution: 640 × 480
Colours: 256
Refresh rate: 57.4 Hz
VIDC clock speed: 25.175 MHz (reported by OS)

..

.--------.
| Others |
'--------'
Unique machine ID: None

OS version: 3.11
OS identifier: &A4
OS description: RISC OS 3.11 (29 Sep 1992)

*********************************************************

ArcEM_OCM DISABLING OCM (aka DISABLEOCM tooltype enabled)


SICK V1.28
(Please mail result file to M.Seifert@t-online.de)

.---------------.
| Result Values |
'---------------'
&00000134 &00000080 &000000A4 &00000137 &000000A0 &00000000
&001DFD90 &00004E20 &00007FFC &01000000 &03704790 &FFFFFFFF
&FFFFFFFF &00008000 &00000200 &00000000 &00000000 &00000000
&036E0D0C &00000000 &00000000 &00000000 &00000000 &FFFFFFFF
&FFFFFFFF &FFFFFFFF &FFFFFFFF &FFFFFFFF &FFFFFFFF &FFFFFFFF
&FFFFFFFF &FFFFFFFF &FFFFFFFF &FFFFFFFF &FFFFFFFF &00000001
&00000000 &00000000 &00000000 &00000000 &41560300 &00000003
&00000000 &00000000 &FFFFFFFF &0000011F &000C0300 &00000000
&00FF0000 &00000D95 &FFFFFFFF &00000001 &00000050 &FFFFFFFF
&000000FF &00000004 &00000280 &000001E0 &00000040 &00006257
&00119A72 &00020000 &01022870 &00000064 &0B76362A &70A58000
&00800DAE &4D7D8000 &00800E1A &126BA000 &00801520 &1473F000
&00800CE1 &12B6A000 &00801383 &0359D000 &0080BBDA

.-----------.
| Guesswork |
'-----------'

Computer model: Acorn A3xx

.-----------.
| Processor |
'-----------'
Type: ARM3, rev. 0
Architecture version: ARMv2a
Designer: Acorn Computer
Implementor: ARM
Manufacturer: VLSI
Clock rate: 21.536 MHz

Processor bugs:
RRX: No
Mode change: No
LDM^: No
LDM/STM: Yes
STM^: No
Istream abort: ?
LDMIB: -
MSR: -

Floating point handler: Old FP-Emulator
FP emulator version: 2.87

Floating point hardware: None


.--------.
| Memory |
'--------'
DRAM size: 16 Mbytes (reported by OS)

VRAM size: 0 bytes (reported by OS)

ROM size: 2 Mbytes
Low ROM access time: 450 ns
High ROM access time: 450 ns

.-------------.
| Frequencies |
'-------------'
IOC timer frequency: 1.965 MHz
IOC timer 0 setting: &4E20 (99.995 Hz)
IOC timer 1 setting: &7FFC (61.041 Hz)

Memory clock: 57.69 MHz (reported by OS)

.--------------------.
| System Performance |
'--------------------'
Integer: 15494.39 Dhrystones/sec
(8.819 Dhrystone 2.1 MIPS)
(0.409 Dhrystone 2.1 MIPS/MHz)

Floating point: 104.0061 kWhetstones/sec
(0.1040 MWIPS)
(0.00483 MWIPS/MHz)

Memory access:
Cache read: 429.5 Mbytes/sec
(20.9 bytes/CPU clock tick)
Cache write: 295.5 Mbytes/sec
(14.4 bytes/CPU clock tick)

Main memory read: 70.22 Mbytes/sec
(1.28 bytes/Memory clock tick)
Main memory write: 77.99 Mbytes/sec
(1.42 bytes/Memory clock tick)

Screen memory read: 71.34 Mbytes/sec
(1.30 bytes/Memory clock tick)
Screen memory write: 12.71 Mbytes/sec
(0.231 bytes/Memory clock tick)

.-----.
| ICs |
'-----'
Memory controller: MEMC1

I/O chip: VL1772

Videochip: VIDC1a (reported by RISC OS)

Special functions chip: None

Real time clock: Philips PCF8583
I²C address: &A0
Reference clock: 32.768 kHz (configured)

LCD controller: None

Battery management unit: None

.-------------.
| Screen mode |
'-------------'
Resolution: 640 × 480
Colours: 256
Refresh rate: 57.2 Hz
VIDC clock speed: 25.175 MHz (reported by OS)

.--------------------------.
| Input And Output Devices |
'--------------------------'
Keyboard type: Archimedes keyboard
Layout: (configured)

Pointer device connection: Quadrature mouse (guessed)

Monitor type: Super-VGA-type monitor (configured)
Monitor lead ID: Unknown (lead ID ='?')

..

.--------.
| Others |
'--------'
Unique machine ID: None

OS version: 3.11
OS identifier: &A4
OS description: RISC OS 3.11 (29 Sep 1992)

Yes I can confirm ArcEm_OCM is x10 slower on my SAM460. Running both emul-versions from RAM:

I bought only the SAM460ex mb and assembled myself.

AOS4.1/SAM460ex/PPC460EX-1155MHZ/2048MB/RadeonHD6570/HDD80GB/DVDRW
#version full
Kickstart 53.40, Workbench 53.11 (26-10-2012)


AmigaOS4.1 update 6+ (betatester)
U-Boot 2010.06.05a (Jan 30 2012 - 16:06:56)

1. intuitionbase helps you on finding proper RAM modules

2.google
or
http://www.google.com/imgres?imgurl=h ... bs=1&sa=X&ved=0CDAQrQMwAw

THX already saw that file, but wasn't sure how to preceed. Will add spanish localiztion ASAP. TIA

How to add spanish translation of MESSAGE file?

Must I register in netsurf svn/git?

Or where to upload such file (translated), I have the settings windows translated, menus and some requesters (the ones I see/get while web browsing).

TIA

Can you post the contents of your DEVS:NetInterfaces/ drawer?
Use Shell/CLI:
list DEVS:NetInterfaces/

Maybe you have some old .info file that AddNetInterfaces tries to load without success.

I got the same font crash, but with FNT_BS.TTF (Cinnamon archive http://desler.be/modules/wfdownloads/visit.php?cid=4&lid=30).
You can test it if it crashes with such font.

Or I can send you such TTF font and .otag .font files if you want.

BYE

Try as Chris suggested:

netsurf -v

On CLI/Shell then you can see if its a TTF font that causes such crash. Move such TTF (and its .otag and .font)) to another place and re-run FixFonts and then try again with netsurf.

I had the same crash and it was a TTF (Cinnamon IIRC) that coauses such crash, now netsurf loads fine.

But everytime I try to SAVE or USE prefs. I get a crashlog.

Will try to mark/copy and post it in netsurf web ASAP.

@K-L

I'm using RC2 libcairo (altivec) that came with RC2, no problems until now, but...

You can keep a backup of the original RC3 libcairo and try RC2 libcairo, if you get some problems revert to RC3 libcairo and re-test.

@mufa

THX it worked!!

@mufa
Hi, just tried to install Spanish ES-es.xpi. TW rc3 asked me if I wanted to install it clicked on YES, but seems nothing happens. Should I set/add/change something else?

Which language did you try?

TIA

Excellent

try UNSETENV ? in Shell/CLI to see options

UnSetEnv DELETE Warp3D/RadeonR200/GLQuake/Anisotropic

DELETE instaad of SAVE


ssolie: can you fix it in the wiki?? TIA

If you're using os4depot ftpd you have a file called FTPUsers and there you change/Add 'User Password Path Permission'

my FTPUsers file:

Hope it helps

Seems some incompatibility with usb stack (some of the modules, ohci, uhci or ehci) and your wireless mouse.
What if you comment out from kicklayout ehci.usbhcd (;MODULE Kickstart/ehci.usbhcd)? (reset button on case and loading system/modules again)

Can you provide some logs? (T:usb.log)
or when wb loads fine, LogViewer (SYS:Utilities/) USB tab.

Take care of what you are doing, if you are not sure don't edit kicklayout!!

Wireless mouse brand?