@Wanderer

Simply AWESOME!

Just tried it, anyone else having problem with uidl? Although my uidl file is intact from 2.6 , it checks it and then begins to download all my 16000 from the beginning! Went back to 2.6 and the same happens! Any ideas anyone plz?

edit: oh well! I decided to bite the bullet, empty my drawers and start getting all my emails anew... :/

good work man! :)

Both my NEC and VIA usb cards work fine on my Peg2, so, I suppose, they'd both also work on a Sam, A1 etc.... Also, they were supported before Update 3, albeit at usb 1.1 speeds.

Theoretically, you might be able to install the 68k version of poseidon under OS4.1 and disable Sirion by commenting out the relevant lines in kicklayout. In practice though, I think there's no driver in the 68k version of poseidon that supports Pegasos 2's internal usb controller or a pci card, so, it'd be completely pointless to do that. And openpci couldn't help with that either, so....

@alkfil

just THX! for trying to get Napalm to work m8 :)

What Antique said

boot without startup and rename from command line

@Varthall

best of luck man!

@Crisot

thx for the detailed explanation :)

@porthan

really? I see.... So, how does it benchmark non existant memory? Where are these results from? What does it benchmark instead of L3 and gives those results? Any idea? Thx!

bppc/603e@330/256mb (70ns)

RAGEMEM v0.37 - compiled 11/06/2010

CPU: 603e 7.4609 @ 0 Mhz
Caches Sizes: L1: 16 KB - L2: none - L3: none
Cache Line: 32

---> CPU <---
MAX MIPS: 502

---> L1 <---
READ32: 724 MB/Sec
READ64: 1162 MB/Sec
WRITE32: 478 MB/Sec
WRITE64: 852 MB/Sec

---> RAM <---
READ32: 41 MB/Sec
READ64: 42 MB/Sec
WRITE32: 23 MB/Sec
WRITE64: 23 MB/Sec
WRITE: 45 MB/Sec (Tricky)

---> VIDEO BUS <---
READ: 5 MB/Sec
WRITE: 15 MB/Sec

NOTE:
Under morphos 1.4.5 w OS4Emu the results are pretty much the same except of MIPS (522) and VRAM write (22mb/sec).

peg2@1.25, updated results with 0.37:

RAGEMEM v0.37 - compiled 11/06/2010

CPU: Motorola MPC 7447/7457 Apollo 1.1 @ 1266 Mhz
Caches Sizes: L1: 32 KB - L2: 512 KB - L3: none
Cache Line: 32

---> CPU <---
MAX MIPS: 3797

---> L1 <---
READ32: 4826 MB/Sec
READ64: 9650 MB/Sec
WRITE32: 4136 MB/Sec
WRITE64: 3219 MB/Sec

---> L2 <---
READ32: 2158 MB/Sec
READ64: 2807 MB/Sec
WRITE32: 1935 MB/Sec
WRITE64: 2440 MB/Sec

---> RAM <---
READ32: 146 MB/Sec
READ64: 149 MB/Sec
WRITE32: 199 MB/Sec
WRITE64: 387 MB/Sec
WRITE: 733 MB/Sec (Tricky)

---> VIDEO BUS <---
READ: 49 MB/Sec
WRITE: 221 MB/Sec

EDIT:

I ran ragemem under morphos 2.6 via os4emu and here's some interesting results:

RAGEMEM v0.37 - compiled 11/06/2010

CPU: PowerPC 7447 0.0 @ 1000 Mhz
Caches Sizes: L1: 32 KB - L2: 256 KB - L3: 1 MB
Cache Line: 0

---> CPU <---
MAX MIPS: 3031

---> L1 <---
READ32: 4814 MB/Sec
READ64: 9624 MB/Sec
WRITE32: 4126 MB/Sec
WRITE64: 3212 MB/Sec

---> L2 <---
READ32: 2260 MB/Sec
READ64: 2956 MB/Sec
WRITE32: 2025 MB/Sec
WRITE64: 2566 MB/Sec

---> L3 <---
READ32: 290 MB/Sec
READ64: 300 MB/Sec
WRITE32: 512 MB/Sec
WRITE64: 554 MB/Sec

---> RAM <---
READ32: 244 MB/Sec
READ64: 252 MB/Sec
WRITE32: 468 MB/Sec
WRITE64: 468 MB/Sec
WRITE: 548 MB/Sec (Tricky)

---> VIDEO BUS <---
READ: 49 MB/Sec
WRITE: 220 MB/Sec

As you can see , under morphos L3 cache is recognised properly and there's a big boost to RAM speed (except "tricky" which is significantly slower). The rest are more or less the same, but why isn't L3 cache recognized under OS4? MIPS are much higher under OS4 as well.

@Ant

there's an updated installer on OS4depot. Afterwards, at least on my peg2/os4.1u2, it works just fine.

@Deniil

lol
still usb 2.0 is a must.

@ssolie

So, does this mean that there IS usb 2.0 support under the hood (fingers crossed)?

@Raziel

I tried 0.35 (both A and B) and the results were pretty much the same between them (A + B) and between 0.34. It didn't crash when it reached the vmem bench, but didn't return any results either. That's on a Peg2 as I said.

edit: I tried with 0.34 again without startup and it worked. So, here's the videomem results:

---> VIDEO BUS <---
READ: 56 MB/Sec
WRITE: 184 MB/Sec

no results with new version even without startup

and (knowing I repeat myself a lot with this) let's hope the next update includes usb 2.0 support :)

good job man! :)

Peg2@1.25Ghz

RAGEMEM v0.34 - compiled 11/02/2010

CPU: Motorola MPC 7447/7457 Apollo 1.1 @ 1266 Mhz
Caches Sizes: L1: 32 KB - L2: 512 KB - L3: none

---> L1 <---
READ: 9648 MB/Sec
WRITE: 3219 MB/Sec

---> L2 <---
READ: 2802 MB/Sec
WRITE: 2428 MB/Sec

---> RAM <---
READ: 150 MB/Sec
WRITE: 392 MB/Sec
WRITE: 733 MB/Sec (Tricky)

---> VIDEO BUS <---
*CRASHES aka DSI and freezes after ignoring it*

great work so far man, here's hoping you stay motivated and complete it!