Dear all

After 5 years, this morning my X5000 suddenly stopped working. I was doing the daily OS4 beta-testing..After a reboot it stopped working.

After pressing the power button, CPU fan starts to spin 1/2 seconds and stops. After some seconds , MCU Error Led starts to blink.

Here is the video (4 seconds)

https://youtu.be/Olkg7Fmr21o

I tried:

Re-seated MicroSD card
Re-flashed, changed MicroSD. Tried 3 different SD Cards
Removed all PCI cards, memory
Replaced battery with a new one.
Tried with 3 different PSUs

Anyone had a similar problem ? Is this repairable ?

@TiredOfLife

I will try RX550 on Sam460 this weekend and will let you know.

@TiredOfLife

I tried RX580 and RX550 on my X5000.

RX 550 is slower than my R7 265.
RX 580 is faster than my R7 265.

Both RX550 and RX580 have some problems with Warp3D Nova apps (freezing, blank screen) with current public version of drivers. So I decided to use R7 265 for some time..

Probably that will change with new drivers updates from A-Eon.

@sTix

I bought LG UW monitor 3 years ago.

Tested with Radeon R7 265, RX 550 and RX580 on X5000 and A1222.

Works fine and supports 2560x1080.

https://www.lg.com/ca_en/desktop-monit ... 4UM58-P-ultrawide-monitor

Off-topic question:
I wonder if RadeonHD driver supports 144Hz refresh rates ?

Hi all

Can you share your experiences with RadeonRX driver and Radeon Polaris Graphic Cards

I have tried Asus Arez RX550 - 2GB and MSI Radeon RX580 - 8GB on my X5000.

But I have returned to R7-265 since it is supported by Warp3D-SI. And R7-265 is faster than RX-550 in real world PC benchmarks :)

Both of them boots to workbench without problems and has smooth performance in 2D operations and 2D games.

RX-550: All the latest Warp3D games Nova work fine.. e.g. Spencer runs at 60 fps. SuperTuxKart, Barony, Foobilliard e.t.c is working fine

RX-580: It has problems with most of Warp3D Nova games. -Spencer shows blank screen and freezes the system.
Barony starts then freezes the system.

Interesting Warp3DNova Logo demo works fine on RX-580.

@broadblues

Thanks for the blog... Which XP-Pen tablets are supported ? Are all recent models on market compatible ?

@Skateman

Then it is perfect for social distancing :)

Hi Paul

Here is the output fromy my X5000..I am using DHCP.

4.AmigaOS42Beta:> shownetstatus all
Network status summary
Local host address = 192.168.0.26 (on interface 'RTL8169')
Default gateway address = 192.168.0.1
Domain name system servers = 46.197.15.60, 178.233.140.110, 176.240.150.250, 46.197.15.60, 178.233.140.110, 176.240.150.250, 192.168.0.1

Device name = p50x0_eth.device
Device unit number = 0
Hardware address = 00:50:C2:FF:FF:00
Maximum transmission unit = 1500 Bytes
Transmission speed = 100000000 Bits/Second
Hardware type = Ethernet
Packets sent = 412
Packets received = 949
Packets dropped = 0 (in = 0, out = 0)
Buffer overruns = 0
Unknown packets = 124
Address = 192.168.0.26
Network mask = 255.255.255.0
Number of read I/O requests = 36 (maximum of 7 used at a time, 36 are still pending)
Number of write I/O requests = 32 (maximum of 5 used at a time, 0 are still pending)
Number of bytes received = 872,516
Number of bytes sent = 70,321
Transfer statistics (in/out) = DMA:0/0 Byte:825/412 Word:-/0
Address binding = Dynamic
Address lease expires = 07/15/2020 9:02 AM
Link status = Up

@Paul

Did you try the X5000's other ethernet port ?

Did you try with another ethernet cable ?

Is there some kind of ip blocker or some content limiter that was setup in your router ?

@Capehill

Is it possible to add screensaver option to ShaderJoy?

E.g. after 1-2 minutes (or user modifiable time), ShaderJoy switches to a fullscreen and runs the shader until you touch mouse or keyboard ?

@Paul

I think you can solve this as follows:

Hold both mouse buttons after kickstart modules are loaded and enter to early boot menu of AmigaOS4

Disable the problematic drive from the menus

Then boot from USB to Workbench.

With MediaToolBox you can change settings of any drive connected.

You can mount the drives with Mounter if you enter the correct tooltypes.

@BobSacamano

I think Samir Hawamdeh is uploading Andrea Palmatè's old ports to OS4Depot for archiving purposes.

When I look at the file dates, all these uploads are from 2010-2012 era..

@broadblues

I am trying to use Wacom Intuos Tablet (CTL-4100WL).

Alexandre Balaban added support for some Wacom tablet to his driver last year, but somehow this model is not working.

I noticed Alexandre's driver is based on your UCLogic driver while checking the source codes.

I can re-compile your driver on AmigaOS4 SDK, I wonder if your driver can be adapted to my Wacom tablet.

https://github.com/linuxwacom/libwacom ... ata/intuos-s-p3-wl.tablet

@thellier

Would it be possible to rotate whole Workbench display ?

@derfs

Thanks but I got this error after following the final step.

@all

I am taking baby steps to compile simple things from Linux..

When I try to cross compile something, I get following error:

e.g.

CMake Error: The source directory "/amiga/Projects/flac-1.3.3/flac-1.3.3" does not appear to contain CMakeLists.txt.

What can be the solution ?

@jabirulo

Here is the controllers that I tested..

I also have a XBox One Scorpio controller but it is not working with AmigaInput.

576972656c65737320436f6e74726f6c,Wireless Controller,platform:AmigaOS 4,a:b1,b:b2,x:b0,y:b3,back:b8,guide:b12,start:b9,leftstick:b10,rightstick:b11,leftshoulder:b4,rightshoulder:b5,dpup:h0.1,dpdown:h0.4,dpleft:h0.8,dpright:h0.2,leftx:a0,lefty:a1,rightx:a2,righty:a3,lefttrigger:b6,righttrigger:b7,
38426974646f20534e33302050726f20,8Bitdo SN30 Pro,platform:AmigaOS 4,a:b1,b:b0,x:b4,y:b3,back:b10,start:b11,leftstick:b13,rightstick:b14,leftshoulder:b6,rightshoulder:b7,dpup:h0.1,dpdown:h0.4,dpleft:h0.8,dpright:h0.2,leftx:a0,lefty:a1,rightx:a2,righty:a3,lefttrigger:b8,righttrigger:b9,

@Paul

Yes there are some online services that will do the printing for you e.g.

https://craftcloud3d.com/

or if one of your friends have 3D printer, they can print this file in a few minutes.

I would print and send you but I am in Istanbul Europe and I guess it will take lots of time to send it usa via normal mail.

@Paul

Is this the rail you are looking for ?

https://www.thingiverse.com/thing:4089285

@Hans

Would it be easier to port latest Webkit for AmiCygnix ?