Forums - All Posts - The Amigans website

Forum Index

Board index » All Posts (Valiant)

Bottom

« 1 ... 12 13 14 (15) 16 17 18 »

Valiant

Re: UBoot IDE scan

Posted on: 2007/1/7 6:37 #281

Not too shy to talk

@pvanni

Quote:

pvanni wrote:
@Valiant

From the UBoot main menu choose Boot sequence
then Amiga Multiboot Options
be shure there are no CD in Boot Device 1, 2, 3

Hope this help.

Regards,
Paolo

OK, using prefs/UBoot in the Boot sources selection I made sure the First (and only) bootsource is Onboard IDE Disk. This got rid of the second scan, but so there is no way I can set the Second, Third or Fourth bootsource without getting the second IDE scan?

Valiant@Camelot
AmigaOne XE, 800Mhz, 1GB, 9250 Radeon, OS4.1u7
Sam440ep, 666Mhz, 512Mb, 9250 Radeon, OS4.1u6
A1-X1000, 1.8Ghz, 1GB, 9250 Radeon, OS4.1x
A1-X5000/40 2.2Ghz, 2GB, Radeon HD 7700, OS4.1 FE ud 2

Topic | Forum

Valiant

Re: UBoot IDE scan

Posted on: 2007/1/6 15:34 #282

Not too shy to talk

@pvanni

Quote:

pvanni wrote:
@Valiant

Quote:

So is there no way to disable the second scan in UBoot?

be shure you have only the HD in bootlist in U-Boot.

Regards,
Paolo

Bootlist? I'm sorry, I don't understand.

Topic | Forum

Valiant

Re: UBoot IDE scan

Posted on: 2007/1/5 15:53 #283

Not too shy to talk

@Swoop

Quote:

Swoop wrote:

...

I use an external powered usb hub instead of a usb card, and my usb works perfectly through that.You could free up one of your pci slots the same way.

No, I can't use an external hub; I've tried. I need a VIA-based USB card to be able to get any sort of USB at all.

Topic | Forum

Valiant

Re: UBoot IDE scan

Posted on: 2007/1/5 15:21 #284

Not too shy to talk

@BillE

Quote:

BillE wrote:
@Valiant

I have my hard drives on an SII0680 card and my CD and DVD on the normal A1 IDE bus.

...

Bill

I would like to be able to put my SiL card back in the A1, but I already have Catweasel, SCSI, and VIA USB cards populating all the slots. Which brings up another question--if I were to get the fix done and could remove the USB card, would there still be any advantage to using a SiL IDE card?

Topic | Forum

Valiant

Re: UBoot IDE scan

Posted on: 2007/1/5 15:16 #285

Not too shy to talk

@NTN

So is there no way to disable the second scan in UBoot?

Topic | Forum

Valiant

UBoot IDE scan

Posted on: 2007/1/4 16:17 #286

Not too shy to talk

Since replacing my DVD drive my boot times have decreased substantially. Especially soft reboots as it doesn't hang looking for a there/not there drive. However during the UBoot phase it still scans the IDE chain a couple of times and IIRC isn't there a way to disable the second scan?

Topic | Forum

Valiant

Re: Shanghai

Posted on: 2007/1/3 15:56 #287

Not too shy to talk

@tonyw

I've got China Challange which is nice, but it doesn't have all the options that Shanghai from Activision has.

Topic | Forum

Valiant

Re: Shanghai

Posted on: 2007/1/3 15:45 #288

Not too shy to talk

@acefnq

I tried sdlLopan under ud4 but it seemed to chew up a lot of CPU cycles and slow alot of other things down. Has this improved under OS4 final?

Topic | Forum

Valiant

Re: DnetC stats

Posted on: 2007/1/3 15:35 #289

Not too shy to talk

@Outcast

Quote:

by Outcast on 2007/1/3 2:53:29

Dunno if it's just me but my Dnet stats seem to have taken a dive since updating to "Final".

Anyone else notice this ?

Same here. Although my RC5 stats have improved just slightly, OGR has really taken a dive.

Topic | Forum

Valiant

Re: New year resolution

Posted on: 2007/1/2 19:20 #290

Not too shy to talk

@Skov

How about Pagestream?

Topic | Forum

Valiant

Shanghai

Posted on: 2007/1/2 19:16 #291

Not too shy to talk

One of the games I miss playing directly in OS4 is Shanghai. Has anyone been able to tweak some setting to get it to start by just clicking on it or will E-UAE continue to be the only way to play it under OS4?

Topic | Forum

Valiant

Re: AmigaAMP and OS4 Final

Posted on: 2007/1/1 5:46 #292

Not too shy to talk

@TrevorDick

It was 2.17 that was giving me problems until I switched to autodetect. Now it works just fine. However none of this answers my original question: Is mpega.library the best one to use under OS4 Final? Is there no hope OS4 friendly version of a WarpUp library? I'd really like to have the Equalizer available even if I don't use it all that much.

Topic | Forum

Valiant

Re: AmigaAMP and OS4 Final

Posted on: 2007/1/1 5:40 #293

Not too shy to talk

@Curty

I do use TuneNet; in fact, that's what I'm using now. But before the current, most stable version I was stuck using AmigaAMP a lot and I still have a fondness for it as well as a lot of playlists.

Topic | Forum

Valiant

AmigaAMP and OS4 Final

Posted on: 2006/12/31 16:22 #294

Not too shy to talk

I also had problems with AmigaAMP locking up the system when exiting until I changed from WarpUp to autodetect which is using the mpega.library. What is the best library for AmigaAMP to use under OS4 Final?

Topic | Forum

Valiant

Re: Request for AmiDock update

Posted on: 2006/12/29 2:28 #295

Not too shy to talk

Shows the name of a sub-dock without having to click on it.

Topic | Forum

Valiant

Re: IBrowse 2.4 Released!

Posted on: 2006/12/27 19:51 #296

Not too shy to talk

Quote:

Valiant wrote:
Is anyone else having problems with context menus in the new release? I can right-click and the relevant menu comes up, but when I try to select an item from it nothing happens.

Sorry for insinuating that this is a problem with IBrowse, as it looks like how the menus function have been changed with OS4 Final. Previously with context menus you'd move the mouse over the menu item you want, it highlights, and when you lift your finger off the menu button it was selected. Now you have to select-click on the menu item again to select it. Is there a way to change this behavior in Prefs? If not, please bring back the old method.

Topic | Forum

Valiant

Re: blank CLI window during OS4 Final boot

Posted on: 2006/12/27 18:45 #297

Not too shy to talk

I thought I'd solved my problem by adding 'Run >NIL:' in front of the 'Execute S:User-Startup' and it worked the first reboot after that, but during that reboot I noticed another small window popping up which said 'Rexxmast failed.' Looking through the User-Startup again I found that the setup for ImageFX tries to run Rexxmast a second time. I commented that out of the User-Startup, but on the next reboot, I'm back to the same original problem.

Topic | Forum

Valiant

Re: Report your 'AmigaOS 4.0 Final' bugs here!

Posted on: 2006/12/27 17:44 #298

Not too shy to talk

Quote:

Severin wrote:
Quote:

spotUP wrote:

PPaint opens a requester saying 'Attention: Memory Save Mode'

Moving windows: change to simple refresh or 16bit

ppaint: edit your startup-sequence and add 'ADDCHIPRAM=4' for 4mb of emulated chipram

ppaint2: iirc that's always been like that.

Edited my startup-sequence and took care of the 'Memory Save Mode', but now there's a 'Load Audio Module' requester which says 'Audio cannot be activated'.

Topic | Forum

Valiant

Re: blank CLI window during OS4 Final boot

Posted on: 2006/12/27 17:33 #299

Not too shy to talk

@LiveForIt

Quote:

LiveForIt wrote:
Try disabling user-startup in startup-sequence, that way you know if the problem is in startup-sequence or user startup.

Aahh, the old 'divide and conquer' strategy. Yes, it is, of course, in the user-startup. At 308 lines it's going to take some time to narrow the cause down.

Topic | Forum

Valiant

Screenblanker causing lockups?

Posted on: 2006/12/27 16:46 #300

Not too shy to talk

Anybody else having problems with the screenblanker causing lockups? For instance I was just in prefs/screenblanker and as soon as I tried to test the Zoom blanker fullscreen it froze the system up entirely. Usually though it happens when I step away from the computer for a time and then the blanker kicks in, and when I come back neither moving the mouse or hitting a key removes the blanker. I have to do a hard reset.

Topic | Forum

Top

« 1 ... 12 13 14 (15) 16 17 18 »