@ktadd

Yes, I've already seen it. Nice overview.

@trixie

Quote:

@trixie
Quote:

Good to know. Plus I was not able to load any MIDI file. I have a tool/module inside Accesories(?) dir but BnP does not see it.

Quote:

Yeah, it burning my eyes!

Quote:

Ok, so I have to try it with other than SoftSyn sounds

Is there a guide or doc for HD-Rec? It looks fantastic and has a working sound module built in.

One more question. The fastest way to see if keyboard works with camd.library?

@trixie

Thanks, Trixie. I will try to play a little more with HD-Rec, Horny and BnP before.

@trixie, sinisrus

Quote:

The initial idea was to play piano thats why standard keys, etc... but then I thought maybe connect it to my SAM and have both worlds? The cheapest Yamaha piano has only USB to host connector, thats why this thread started
I noticed almost new M-Audio Keystation 61 III for 80 euro and it would allow me and my son to learn to play and have fun with Amiga. It has USB MIDI, 1x MIDI Out and is USB compliant...

As for the rest of your post, man, I have to learn a lot thanks for the input about Timi and Phonolith. Horny was unable to choose/use Softsyn from Depot.

Hi,

Following my successful tests with XSane and HP Printer/Scanner (Thanks Edgar ) I'd like to try something totally new to me. Its MIDI keyboard connected to my SAM440 Flex. I have almost zero knowledge about this topic but my plan is to buy smth not expensive, with 61+ standard, dynamic keys. Maybe M Audio Keystation 61 III? The older model is reported to work with AOS4.1 and I may buy a used one(half year old).
Probably it will be only fun/hobby for me but maybe something more for my son.
I have not decided yet but I'd like to know what is important/how to connect to AmigaOne/SAM. So...

USB MIDI - does it mean its In/Out connector?
MIDI In/Out - needed if USB MIDI is present?
MIDI Thru - probably not needed to me
USB to host - ?
USB to device - ?

I tried several programs (HD-Rec, Horny, Bars n Pipes) so far but have lots of different problems. Since I have no keyboard I use SoftSyn so far...but its a topic for another thread...

Thanks

Hi,I need more time to try again problem with tools but Its easy to reproduce the crash:
Start MS2. Open new, empty project. Try to close first one (empty) which was automatically created after start.
Sam440,R9250...
Crash log for task "MindSpace 2 WIP"
Generated by GrimReaper 53.19
Crash occured in module MindSpace 2 WIP at address 0x6F8870DC
Type of crash: DSI (Data Storage Interrupt) exception
Alert number: 0x80000003

Register dump:
GPR (General Purpose Registers):
0: 54CB434C 53CECC20 00000000 53CEEB74 53CD6AA0 00000010 73640000 00000000
8: 53CD7A40 00000000 54CB434C 01AF5E38 00000010 53CD3968 00000000 5FD2B680
16: 6F8C6730 00000000 00000000 00340014 02270000 02270000 15037018 00000000
24: 543CD9D2 00000000 24422284 00000000 00000000 00000000 17F1BC9E 53CECC20


FPR (Floating Point Registers, NaN = Not a Number):
0: nan 77 50 0
4: 0 365.8 27.8 0
8: 0 4.5036e+15 365.8 27.8
12: 443 78 0 2.43131e-295
16: 4.90824e-193 0 0 0
20: 0 0 0 0
24: 0 2.65249e-315 0 0
28: 0 0 0 5.58058e-222

FPSCR (Floating Point Status and Control Register): 0x82004000


SPRs (Special Purpose Registers):
Machine State (msr) : 0x0002F030
Condition (cr) : 0x5110DDA0
Instruction Pointer (ip) : 0x6F8870DC
Xtended Exception (xer) : 0x018233AC
Count (ctr) : 0x00000000
Link (lr) : 0x00000000
DSI Status (dsisr) : 0x01842B34
Data Address (dar) : 0x00000000



680x0 emulated registers:
DATA: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
ADDR: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
FPU0: 0 0 0 0
FPU4: 0 0 0 0



Symbol info:
Instruction pointer 0x6F8870DC belongs to module "MindSpace 2 WIP" (PowerPC)
Symbol: updateWindowTitle + 0xCC in section 8 offset 0x00011608

Stack trace:
MindSpace 2 WIP:updateWindowTitle()+0xcc (section 8 @ 0x11608)
MindSpace 2 WIP:updateWindowTitle()+0x48 (section 8 @ 0x11584)
MindSpace 2 WIP:main()+0xa90 (section 8 @ 0x516EC)
native kernel module newlib.library.kmod+0x000020ac
native kernel module newlib.library.kmod+0x00002d5c
native kernel module newlib.library.kmod+0x00002ef0
MindSpace 2 WIP:_start()+0x170 (section 8 @ 0x16C)
native kernel module dos.library.kmod+0x000255c8
native kernel module kernel+0x0003e7b4
native kernel module kernel+0x0003e7fc

PPC disassembly:
6f8870d4: 813f2f00 lwz r9,12032(r31)
6f8870d8: 81290fb4 lwz r9,4020(r9)
*6f8870dc: 83690010 lwz r27,16(r9)
6f8870e0: 813f2f00 lwz r9,12032(r31)
6f8870e4: 80090fac lwz r0,4012(r9)

System information:

CPU
Model: AMCC PPC440EP V1.3
CPU speed: 799 MHz
FSB speed: 133 MHz
Extensions:

Machine
Machine name: Sam440EP
Memory: 1048576 KB
Extensions: bus.pci

@yoodoo2

Have played a little bit with MS2 and it looks promising. The urgent features are load, undo, freehand, curve, IMO.
What I really, really like is a borderless toolbar, without close, resize, etc. gadgets. Eets less space which is very important plus it looks clean and orderly. You have put a lot of effort in a toolbar preferences. Now drawbacks ;) I tried all tools and after some time they stopped working. When I open a second project window and then try to close the first one I have a crash. Need to learn a little bit more before further comments. :)

@Hans
Quote:

Done. Forum.amigaone.pl and exec.pl...

@Amigo1

OK, thanks

Maybe I'll write to ACube or molex to 3pin adapter is just enough...

Hello,

Is there a power connector on Sam440ep-flex to connect chassis/cpu fan? Not all pins are described in a manual.

@RIBDEVIL

I can see your pain, I'm in similar situation but ACube was making a great support thruogh all these years. I still hope they will make the needed changes in UBoot because no one writes the drivers for the older cards...and honestly, how long a multi bilion dollar company support your cell phone? Mine doesn't get updates after two years...
...so Tabor to the rescue?!

PS. You have to buy an expensive PCI to PCIe adapter, probably a new case and the result would not be spectacular...Hmmm, I don't know....

@Chris
Quote:

Any plans for that? Anyway, thanks for the reply...and ongoing developement

@Chris

Is it possible to allow more than only one row of links/buttons in a toolbar?

@JosDuchIt

Sorry, I don't remember, played with it only a little bit long time ago.

...or Sodipodi
http://os4depot.net/index.php?functio ... raphics/edit/sodipodi.lha

Trying to register to Amisphere...No matter how long and complicated password I set it says "try more secure password" plus it did not instal in a different location than Utilities.
Is it written in Holywood?

@trixie

By the way, what has happened to the two graphics guys

They are mentioned here...
http://www.a-eon.biz/PDF/News_Release_Candi.pdf

R9250 128MB, SAM440 flex...

@LiveForIt

mplayer -quiet -benchmark -ao null -nosound ram:superman.flv

BENCHMARKs: VC: 43.934s VO: 29.419s A: 0.000s Sys: 0.494s = 73.848s
BENCHMARK%: VC: 59.4931% VO: 39.8381% A: 0.0000% Sys: 0.6688% = 100.0000%


mplayer -quiet -benchmark -ao null -nosound -vo comp::rgb ram:superman.flv

BENCHMARKs: VC: 44.102s VO: 34.257s A: 0.000s Sys: 0.466s = 78.825s
BENCHMARK%: VC: 55.9495% VO: 43.4594% A: 0.0000% Sys: 0.5910% = 100.0000%