Login
Username:

Password:

Remember me



Lost Password?

Register now!

Sections

Who's Online
116 user(s) are online (102 user(s) are browsing Forums)

Members: 0
Guests: 116

more...

Support us!

Headlines

Report message:*
 

Re: Atheros WLAN driver success/failures

Subject: Re: Atheros WLAN driver success/failures
by pjs on 2013/9/19 18:36:59

Hi ncafferkey,

Quote:
ncafferkey wrote:
But the problem in the X1000 appears to be different, as it partially works for you.


Agreed, yes it is.

FWIW, I took the atheros card to my office, plugged it into
my A1-XE and it's mostly working here. This is with the
v15 driver from OS4Depot.

The only drawback is that I have to cold boot and then warm
boot to get the machine started with the card in, but I
think this may be a problem with UBoot variables.

If it helps any, I started the network manually and here's
the feedback I got from WM:
Quote:

Initializing interface 'atheros5000.device:0' conf 'ENV:Sys/Wireless.prefs' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
Configuration file 'ENV:Sys/Wireless.prefs' -> 'ENV:Sys/Wireless.prefs'
Reading configuration file 'ENV:Sys/Wireless.prefs'
Line: 15 - start of a new network block
ssid - hexdump_ascii(len=14):
50 4a 53 77 69 72 65 6c 65 73 73 4e 65 74 PJSwirelessNet
key_mgmt: 0x4
wep_key0 - hexdump(len=13): [REMOVED]
wep_tx_keyidx=0 (0x0)
Priority group 0
id=0 ssid='PJSwirelessNet'
*** [wpa_sm_init] sm->pmksa=0x64396824 ***
Own MAC address: 00:1b:2f:cf:ba:a7
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: Supplicant port status: Unauthorized
EAPOL: Supplicant port status: Unauthorized
Added interface atheros5000.device:0
State: DISCONNECTED -> SCANNING
Starting AP scan for wildcard SSID
MLME: starting scan
MLME: scan channel 1 (2412 MHz)
sana2: sending MLME frame
unknown vendor specific information element ignored (vendor OUI 00:03:93 len=7)
unknown vendor specific information element ignored (vendor OUI 00:17:f2 len=14)
MLME: scan channel 2 (2417 MHz)
sana2: sending MLME frame
MLME: scan channel 3 (2422 MHz)
sana2: sending MLME frame
Unknown Broadcom information element ignored (type=52 len=26)

unknown vendor specific information element ignored (vendor OUI 00:03:7f len=9)
unknown vendor specific information element ignored (vendor OUI 00:03:7f len=10)
MLME: scan channel 4 (2427 MHz)
sana2: sending MLME frame
Unknown Broadcom information element ignored (type=52 len=26)

unknown vendor specific information element ignored (vendor OUI 00:03:7f len=9)
unknown vendor specific information element ignored (vendor OUI 00:03:7f len=10)
Unknown Broadcom information element ignored (type=52 len=26)

unknown vendor specific information element ignored (vendor OUI 00:03:7f len=9)
unknown vendor specific information element ignored (vendor OUI 00:03:7f len=10)
MLME: scan channel 5 (2432 MHz)
sana2: sending MLME frame
MLME: scan channel 6 (2437 MHz)
sana2: sending MLME frame
Unknown Broadcom information element ignored (type=52 len=26)

unknown vendor specific information element ignored (vendor OUI 00:03:7f len=9)
unknown vendor specific information element ignored (vendor OUI 00:03:7f len=10)
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
MLME: scan channel 7 (2442 MHz)
sana2: sending MLME frame
MLME: scan channel 8 (2447 MHz)
sana2: sending MLME frame
MLME: scan channel 9 (2452 MHz)
sana2: sending MLME frame
MLME: scan channel 10 (2457 MHz)
sana2: sending MLME frame
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=6)
MLME: scan channel 11 (2462 MHz)
sana2: sending MLME frame
MLME: scan channel 12 (2467 MHz)
sana2: sending MLME frame
unknown vendor specific information element ignored (vendor OUI 00:03:93 len=7)
unknown vendor specific information element ignored (vendor OUI 00:17:f2 len=14)
MLME: scan channel 13 (2472 MHz)
sana2: sending MLME frame
EAPOL: disable timer tick
EAPOL: Supplicant port status: Unauthorized
unknown vendor specific information element ignored (vendor OUI 00:03:93 len=7)
unknown vendor specific information element ignored (vendor OUI 00:17:f2 len=14)
MLME: scan channel 14 (2484 MHz)
sana2: sending MLME frame
unknown vendor specific information element ignored (vendor OUI 00:03:93 len=7)
unknown vendor specific information element ignored (vendor OUI 00:17:f2 len=14)
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
Unknown Broadcom information element ignored (type=52 len=26)

MLME: scan channel 1 (2412 MHz)
sana2: sending MLME frame
unknown vendor specific information element ignored (vendor OUI 00:03:93 len=7)
unknown vendor specific information element ignored (vendor OUI 00:17:f2 len=14)
unknown vendor specific information element ignored (vendor OUI 00:17:f2 len=11)
MLME: scan channel 2 (2417 MHz)
sana2: sending MLME frame
unknown vendor specific information element ignored (vendor OUI 00:03:93 len=7)
unknown vendor specific information element ignored (vendor OUI 00:17:f2 len=14)
unknown vendor specific information element ignored (vendor OUI 00:17:f2 len=11)
Unknown Broadcom information element ignored (type=52 len=26)

unknown vendor specific information element ignored (vendor OUI 00:03:7f len=9)
unknown vendor specific information element ignored (vendor OUI 00:03:7f len=10)
MLME: scan channel 3 (2422 MHz)
sana2: sending MLME frame
Unknown Broadcom information element ignored (type=52 len=26)

unknown vendor specific information element ignored (vendor OUI 00:03:7f len=9)
unknown vendor specific information element ignored (vendor OUI 00:03:7f len=10)
MLME: scan channel 4 (2427 MHz)
sana2: sending MLME frame
MLME: scan channel 5 (2432 MHz)
sana2: sending MLME frame
MLME: scan channel 6 (2437 MHz)
sana2: sending MLME frame
Unknown Broadcom information element ignored (type=52 len=26)

unknown vendor specific information element ignored (vendor OUI 00:03:7f len=9)
unknown vendor specific information element ignored (vendor OUI 00:03:7f len=10)
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
MLME: scan channel 7 (2442 MHz)
sana2: sending MLME frame
MLME: scan channel 8 (2447 MHz)
sana2: sending MLME frame
MLME: scan channel 9 (2452 MHz)
sana2: sending MLME frame
MLME: scan channel 10 (2457 MHz)
sana2: sending MLME frame
MLME: scan channel 11 (2462 MHz)
sana2: sending MLME frame
MLME: scan channel 12 (2467 MHz)
sana2: sending MLME frame
unknown vendor specific information element ignored (vendor OUI 00:03:93 len=7)
unknown vendor specific information element ignored (vendor OUI 00:17:f2 len=14)
unknown vendor specific information element ignored (vendor OUI 00:17:f2 len=11)
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
Unknown Broadcom information element ignored (type=52 len=26)

MLME: scan channel 13 (2472 MHz)
sana2: sending MLME frame
unknown vendor specific information element ignored (vendor OUI 00:03:93 len=7)
unknown vendor specific information element ignored (vendor OUI 00:17:f2 len=14)
unknown vendor specific information element ignored (vendor OUI 00:17:f2 len=11)
unknown vendor specific information element ignored (vendor OUI 00:03:93 len=7)
unknown vendor specific information element ignored (vendor OUI 00:17:f2 len=14)
unknown vendor specific information element ignored (vendor OUI 00:17:f2 len=11)
MLME: scan completed
BSS: Start scan result update 1
BSS: Add new id 0 BSSID 00:7f:28:99:51:13 SSID 'LFZ7J'
BSS: Add new id 1 BSSID 7c:d1:c3:d1:51:d8 SSID 'METE Network'
BSS: Add new id 2 BSSID 1c:af:f7:dc:ad:29 SSID 'pewettco'
BSS: Add new id 3 BSSID c0:3f:0e:76:c4:f3 SSID 'Ellens Network'
BSS: Add new id 4 BSSID 68:7f:74:21:43:d5 SSID 'equallevel3'
BSS: Add new id 5 BSSID c0:3f:0e:8e:bc:5c SSID 'CTP'
BSS: Add new id 6 BSSID 0a:90:7f:8a:c7:24 SSID 'FR'
BSS: Add new id 7 BSSID 00:12:17:19:39:ee SSID 'ABS'
BSS: Add new id 8 BSSID 00:04:e2:ad:1e:40 SSID 'PJSwirelessNet'
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:7f:28:99:51:13 ssid='LFZ7J' wpa_ie_len=0 rsn_ie_len=24 caps=0x411
skip - SSID mismatch
1: 7c:d1:c3:d1:51:d8 ssid='METE Network' wpa_ie_len=0 rsn_ie_len=20 caps=0x1431
skip - SSID mismatch
2: 1c:af:f7:dc:ad:29 ssid='pewettco' wpa_ie_len=26 rsn_ie_len=24 caps=0x431
skip - SSID mismatch
3: c0:3f:0e:76:c4:f3 ssid='Ellens Network' wpa_ie_len=26 rsn_ie_len=24 caps=0x431
skip - SSID mismatch
4: 68:7f:74:21:43:d5 ssid='equallevel3' wpa_ie_len=28 rsn_ie_len=24 caps=0x411
skip - SSID mismatch
5: c0:3f:0e:8e:bc:5c ssid='CTP' wpa_ie_len=0 rsn_ie_len=20 caps=0x431
skip - SSID mismatch
6: 0a:90:7f:8a:c7:24 ssid='FR' wpa_ie_len=26 rsn_ie_len=0 caps=0x411
skip - SSID mismatch
7: 00:12:17:19:39:ee ssid='ABS' wpa_ie_len=24 rsn_ie_len=0 caps=0x411
skip - SSID mismatch
8: 00:04:e2:ad:1e:40 ssid='PJSwirelessNet' wpa_ie_len=0 rsn_ie_len=0 caps=0x431
skip - no WPA/RSN IE
Try to find non-WPA AP
0: 00:7f:28:99:51:13 ssid='LFZ7J' wpa_ie_len=0 rsn_ie_len=24 caps=0x411
skip - SSID mismatch
1: 7c:d1:c3:d1:51:d8 ssid='METE Network' wpa_ie_len=0 rsn_ie_len=20 caps=0x1431
skip - SSID mismatch
2: 1c:af:f7:dc:ad:29 ssid='pewettco' wpa_ie_len=26 rsn_ie_len=24 caps=0x431
skip - SSID mismatch
3: c0:3f:0e:76:c4:f3 ssid='Ellens Network' wpa_ie_len=26 rsn_ie_len=24 caps=0x431
skip - SSID mismatch
4: 68:7f:74:21:43:d5 ssid='equallevel3' wpa_ie_len=28 rsn_ie_len=24 caps=0x411
skip - SSID mismatch
5: c0:3f:0e:8e:bc:5c ssid='CTP' wpa_ie_len=0 rsn_ie_len=20 caps=0x431
skip - SSID mismatch
6: 0a:90:7f:8a:c7:24 ssid='FR' wpa_ie_len=26 rsn_ie_len=0 caps=0x411
skip - SSID mismatch
7: 00:12:17:19:39:ee ssid='ABS' wpa_ie_len=24 rsn_ie_len=0 caps=0x411
skip - SSID mismatch
8: 00:04:e2:ad:1e:40 ssid='PJSwirelessNet' wpa_ie_len=0 rsn_ie_len=0 caps=0x431
selected non-WPA AP 00:04:e2:ad:1e:40 ssid='PJSwirelessNet'
Trying to associate with 00:04:e2:ad:1e:40 (SSID='PJSwirelessNet' freq=2452 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: clearing own WPA/RSN IE
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
MLME: Initial auth_alg=0
MLME: authenticate with AP 00:04:e2:ad:1e:40
sana2: sending MLME frame
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - EAP fail=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portControl=ForceAuthorized
EAPOL: Supplicant port status: Unauthorized
MLME: RX authentication from 00:04:e2:ad:1e:40 (alg=0 transaction=2 status=0)
MLME: authenticated
MLME: associate with AP 00:04:e2:ad:1e:40
sana2: sending MLME frame
MLME: RX AssocResp from 00:04:e2:ad:1e:40 (capab=0x431 status=0 aid=2)
MLME: associated
Association info event
req_ies - hexdump(len=32): 00 0e 50 4a 53 77 69 72 65 6c 65 73 73 4e 65 74 01 08 02 04 0b 16 0c 12 18 24 32 04 30 48 60 6c
resp_ies - hexdump(len=16): 01 04 82 84 8b 96 32 08 0c 12 18 24 30 48 60 6c
freq=2452 MHz
WPA: clearing own WPA/RSN IE
State: ASSOCIATING -> ASSOCIATED
Associated to a new BSS: BSSID=00:04:e2:ad:1e:40
Associated with 00:04:e2:ad:1e:40
WPA: Association event - clear replay counter
WPA: Clear old PTK
EAPOL: External notification - portEnabled=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portValid=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state S_FORCE_AUTH
EAPOL: Supplicant port status: Authorized
EAPOL: SUPP_BE entering state IDLE
Cancelling authentication timeout
State: ASSOCIATED -> COMPLETED
CTRL-EVENT-CONNECTED - Connection to 00:04:e2:ad:1e:40 completed (auth) [id=0 id_str=]
Cancelling scan request
sana2: setting negotiate


As I said, the network is working and I've got a continuous
ping running to my router. The only running hickup I see
is the occasional "(DUP!)" in the ping returns.

Thanks & I hope this helps,

PJS


Powered by XOOPS 2.0 © 2001-2016 The XOOPS Project