Login
Username:

Password:

Remember me



Lost Password?

Register now!

Sections

Who's Online
105 user(s) are online (59 user(s) are browsing Forums)

Members: 1
Guests: 104

VooDoo, more...

Headlines

 
  Register To Post  

X5000 and temp dockies
Just popping in
Just popping in


See User information
There are nowadays temp dockies for X5000, and they give the values for the CPU, PCB and PCIe.

From what points exactly are the PCB and PCIe temperatures measured? What does the PCIe value actually mean and what factors are rising or lowering it?

Go to top
Re: X5000 and temp dockies
Just popping in
Just popping in


See User information
Hmm.... Not any answer?

It is somewhat ironical that some people make the effort to program a tool of which no one knows what it is REALLY doing !-)

Go to top
Re: X5000 and temp dockies
Just can't stay away
Just can't stay away


See User information
In Cyrus mb Technical manual PDF:

8 MCU
The MCU is a supervisor for the Cyrus Plus motherboard and provides voltage and temperature monitoring for
the CPU.
...
8.1.3 TEMPERATURES READINGS
...
There are three temperature available to read on the Cyrus Plus motherboard. The temperatures given are
returned in this order:
1. PCB temperature
2. CPU temperature
3. PCIe switch temperature
Example:
CPU command #t
MCU Returns $t+20+38+4B
Represents
+32°C for the PCB temperature
+56°C for the CPU temperature
+75°C for the PCIe switch temperature


I don't own a X50x0
I just "converted" Cyborg and ZeroG work/source to a docky.

Go to top
Re: X5000 and temp dockies
Just popping in
Just popping in


See User information
@jabirulo

>In Cyrus mb Technical manual PDF:

Thanks for the tip about the technical manual! But I was not able to find from it a) where the motherboard sensor(s) and b) the pcie-switch are located.

Or is the pcie-switch possibly the chip which has a heat sink on it but no fan? (located on the Cyrus board near the corner diagonally opposite to the battery holder)

This pcie-temperature seems to be the most sensitive to the blow speed setting of the case fans, which would logical if it has a heat sink.

Go to top

  Register To Post

 




Currently Active Users Viewing This Thread: 1 ( 0 members and 1 Anonymous Users )




Powered by XOOPS 2.0 © 2001-2023 The XOOPS Project