Login
Username:

Password:

Remember me



Lost Password?

Register now!

Sections

Who's Online
85 user(s) are online (44 user(s) are browsing Forums)

Members: 0
Guests: 85

more...

Headlines

 
  Register To Post  

3000T help request
Just popping in
Just popping in


See User information
I just got a 3000T, it has no floppy drive, and no (according to WB) fast RAM. Is there a goof trouble shooting resource out there?

Thank you.

Go to top
Re: 3000T help request
Just popping in
Just popping in


See User information
@Nuder_Try

If you get desperate, you should be able to use any regular Amiga floppy drive. The problem you will run into is the front bezel which is a bit different on the 3000T to most of the other Amigas.

With the memory side of things and going off my (bad) memory, you should at least have 2Mb of chip RAM on the motherboard. The 3000 and 3000T can take up to 16Mb of fast RAM on the motherboard as well but they require special DRAM chips to do so or you could just go a RAM board like a ZorRAM or something similar.

Go to top
Re: 3000T help request
Just popping in
Just popping in


See User information
@prowler

Thanks for the info on the drive. I've not need to use the default faceplates, I have a 5.25" to 3.5" thingie somewhere. Plus I'd rather use a HD than a DD drive. The machine only has 1 meg chip, so there's not too much I can do with it, but am looking for RAM addons (and another copy of 3.9) :)

Go to top
Re: 3000T help request
Just popping in
Just popping in


See User information
well, for functionning properly the A3000 and T models needs to have at least 1 MB chip ram AND 1 MB fast ram installed !

Amigalement,
Jean-Francois Bachelet, Amiga nuts since 1985
-----------------------------------------------------------
Welcome to Happy Computing : AMIGA! (C)2K4-2K99 voxel
Go to top
Re: 3000T help request
Just popping in
Just popping in


See User information
I have several non-Amiga HD floppy drives. Is there an adaptor that I could use to get them to work?

Go to top
Re: 3000T help request
Just popping in
Just popping in


See User information
Still getting this beast back up... Doing better, but would like to put in my Apollo 4060. However, I can't find instructions for the needed motherboard fix. Is there a good place to look for that?

Go to top
Re: 3000T help request
Just popping in
Just popping in


See User information

Go to top
Re: 3000T help request
Just popping in
Just popping in


See User information
Possibly, I thought there was a lead that needed to be run as well. (This is my 1st 3000)

Go to top
Re: 3000T help request
Just popping in
Just popping in


See User information
I still have some Zip ram left, but it is not much 512or 1024KB. There is someone who sells it on Amibay, from Polen.

Also my sold 3000T had a Bigram 256MB, slower then onboard ram, but working fine.


That 68060 card does not work the onboard 3000T SCSI, reading the guide.

Go to top
Re: 3000T help request
Just popping in
Just popping in


See User information
@benny

Would love a bigram, or similar, but haven't been able to find any for sale.

Go to top
Re: 3000T help request
Just popping in
Just popping in


See User information
@benny

Do you recall what the modification to the ROMs are for that board. I got mine used, so no manual. All I could find only was the "use the supplied sockets" (also not included.)

Go to top
Re: 3000T help request
Just popping in
Just popping in


See User information
@Nuder_Try

Individual is planning en upgraded version:

https://twitter.com/AmigaWorld/status/1182394008582217728/photo/1


Go to top
Re: 3000T help request
Just popping in
Just popping in


See User information
@Nuder_Try

I don't owned the board myself, here is a german manual:

http://amiga.resource.cx/manual/Apollo4060.pdf

"A3000: a wire has to be connected between the A3000 SCSI chip and the Kickstart chips"


Go to top
Re: 3000T help request
Just can't stay away
Just can't stay away


See User information
Quote:
a wire has to be connected between the A3000 SCSI chip and the Kickstart chips

Ugh! I'm so glad I gave up on the Classics

The Rear Window blog

AmigaOne X5000 @ 2GHz / 4GB RAM / Radeon RX 560 / ESI Juli@ / AmigaOS 4.1 Final Edition
SAM440ep-flex @ 667MHz / 1GB RAM / Radeon 9250 / AmigaOS 4.1 Final Edition
Go to top
Re: 3000T help request
Just popping in
Just popping in


See User information
Does anyone know of the proper jumper settings for a 3000T to have an accelarator? I've a 68060 card (new, not the mentioned 4060), but all I can find online are what the jumpers do. not the correct settings. I'm afraid the descriptions are mainly gibberish to me.

Thanks in advance.

Go to top

  Register To Post

 




Currently Active Users Viewing This Thread: 1 ( 0 members and 1 Anonymous Users )




Powered by XOOPS 2.0 © 2001-2023 The XOOPS Project