Login
Username:

Password:

Remember me



Lost Password?

Register now!

Sections

Who's Online
81 user(s) are online (66 user(s) are browsing Forums)

Members: 0
Guests: 81

more...

Support us!

Headlines

Report message:*
 

Re: Atheros WLAN driver success/failures

Subject: Re: Atheros WLAN driver success/failures
by pjs on 2013/9/24 16:48:19

Just to provide some more test results, I've replaced the
WPN311 card with my Amigakit wifi card in my A1-XE to see
how it worked.

Using the v2.4 prism driver, I started WM manually and it
looks like everything fired up OK and my system is online.
Here's the WM output:

Quote:
Initializing interface 'prism2.device:0' conf 'ENV:Sys/Wireless.prefs' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
Configuration file 'ENV:Sys/Wireless.prefs' -> 'ENV:Sys/Wireless.prefs'
Reading configuration file 'ENV:Sys/Wireless.prefs'
Line: 15 - start of a new network block
ssid - hexdump_ascii(len=14):
50 4a 53 77 69 72 65 6c 65 73 73 4e 65 74 PJSwirelessNet
key_mgmt: 0x4
wep_key0 - hexdump(len=13): [REMOVED]
wep_tx_keyidx=0 (0x0)
Priority group 0
id=0 ssid='PJSwirelessNet'
*** [wpa_sm_init] sm->pmksa=0x66f26814 ***
Own MAC address: 00:0e:6a:7a:e8:8c
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: Supplicant port status: Unauthorized
EAPOL: Supplicant port status: Unauthorized
Added interface prism2.device:0
State: DISCONNECTED -> SCANNING
Starting AP scan for wildcard SSID
BSS: Start scan result update 1
BSS: Add new id 0 BSSID 00:04:e2:ad:1e:40 SSID 'PJSwirelessNet'
BSS: Add new id 1 BSSID 0a:90:7f:8a:c7:24 SSID 'FR'
BSS: Add new id 2 BSSID c0:3f:0e:76:c4:f3 SSID 'Ellens Network'
BSS: Add new id 3 BSSID 1c:af:f7:dc:ad:29 SSID 'pewettco'
BSS: Add new id 4 BSSID f8:e4:fb:d9:f1:b1 SSID 'MLN7Q'
BSS: Add new id 5 BSSID 00:7f:28:99:51:13 SSID 'LFZ7J'
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:04:e2:ad:1e:40 ssid='PJSwirelessNet' wpa_ie_len=0 rsn_ie_len=0 caps=0x431
skip - no WPA/RSN IE
1: 0a:90:7f:8a:c7:24 ssid='FR' wpa_ie_len=0 rsn_ie_len=0 caps=0x411
skip - no WPA/RSN IE
2: c0:3f:0e:76:c4:f3 ssid='Ellens Network' wpa_ie_len=0 rsn_ie_len=0 caps=0x431
skip - no WPA/RSN IE
3: 1c:af:f7:dc:ad:29 ssid='pewettco' wpa_ie_len=0 rsn_ie_len=0 caps=0x431
skip - no WPA/RSN IE
4: f8:e4:fb:d9:f1:b1 ssid='MLN7Q' wpa_ie_len=0 rsn_ie_len=0 caps=0x411
skip - no WPA/RSN IE
5: 00:7f:28:99:51:13 ssid='LFZ7J' wpa_ie_len=0 rsn_ie_len=0 caps=0x411
skip - no WPA/RSN IE
Try to find non-WPA AP
0: 00:04:e2:ad:1e:40 ssid='PJSwirelessNet' wpa_ie_len=0 rsn_ie_len=0 caps=0x431
selected non-WPA AP 00:04:e2:ad:1e:40 ssid='PJSwirelessNet'
Trying to associate with 00:04:e2:ad:1e:40 (SSID='PJSwirelessNet' freq=2452 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: clearing own WPA/RSN IE
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - EAP fail=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portControl=ForceAuthorized
EAPOL: Supplicant port status: Unauthorized
Association info event
req_ies - hexdump(len=2): 00 00
WPA: clearing own WPA/RSN IE
State: ASSOCIATING -> ASSOCIATED
Associated to a new BSS: BSSID=00:04:e2:ad:1e:40
Associated with 00:04:e2:ad:1e:40
WPA: Association event - clear replay counter
WPA: Clear old PTK
EAPOL: External notification - portEnabled=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portValid=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state S_FORCE_AUTH
EAPOL: Supplicant port status: Authorized
EAPOL: SUPP_BE entering state IDLE
Cancelling authentication timeout
State: ASSOCIATED -> COMPLETED
CTRL-EVENT-CONNECTED - Connection to 00:04:e2:ad:1e:40 completed (auth) [id=0 id_str=]
Cancelling scan request
EAPOL: disable timer tick
BSS: Expire BSS 1 due to age
BSS: Remove id 1 BSSID 0a:90:7f:8a:c7:24 SSID 'FR'
BSS: Expire BSS 2 due to age
BSS: Remove id 2 BSSID c0:3f:0e:76:c4:f3 SSID 'Ellens Network'
BSS: Expire BSS 3 due to age
BSS: Remove id 3 BSSID 1c:af:f7:dc:ad:29 SSID 'pewettco'
BSS: Expire BSS 4 due to age
BSS: Remove id 4 BSSID f8:e4:fb:d9:f1:b1 SSID 'MLN7Q'
BSS: Expire BS

Hopefully, the Amigakit card stays online longer here than
it does on my SAM. I'll keep a shell pinging the router
and see what happens.

I hope this helps with your development.

Thanks,

PJS


Powered by XOOPS 2.0 © 2001-2016 The XOOPS Project