@caver99

yeh thats the one i have, just asking

I have UBoot 1.1.1 on my amigaone is this the last one done for the se board or is there a newer version?

Can these be used on os4.1 to access a network atached storage device plus i have found out that the NAS uses SMB as its network so possible ftp or other connection.

ok unzipped them and i have 4 files, 3 have .class and 1 has .mf?

Can samba use encrypted passwords?

The reason i ask is i have some nas drives for my windows and linux pcs and would like to access them form os4 but they use a .jar file.

Is there any version of java for os4.1?

@caver99

I have just got my a1 booting again as you will see in another thread, but this works perfectly nice one.
just one thing are you working on getting it to go full scree and whats involved with getting sound?
If you need any beta testing just let me know, as i dont mind if i break my os.

Thanks again

@caver99

ok, i have just removed my battery and now it will boot inti the install thats great, what settings will i need to enter in the set env to boot from harddrive?

@caver99

Yes i have had the system fully working then i started to mess to try and get the system to boot from cd rom now my hdd wont boot, even if the slb was not present on my hdd why wont the cd boot past the kickstart screen??
I am comming close to pulling my battery out and flushing the uboot and trieing from scratch.
I can redirect the uboot out put to serial but whast good will that do, can i connect that to my pc and capture the output or something?

@caver99

i have just found the early boot screen and no dh0 or dh1 are not there, have i messed up a u-boot setting?

@caver99

Yes i see both hard drives and both dvd roms it boot the kickstart off of the main boot drive then i get the kickstart window.

I have booted from my os4.1 install cd and it loads the kickstart then goes to the insterting disk what have i meesed up as i get the same screen when i boot from the harddrive, is this a setenv parameter?
HELP!!!!

@caver99

That would be great, i am just trying to put a cable box through it, sound is not that much of an issue but would be nice in the end.
I am after a pal version as i am in the uk.

@caver99

The pciscan reports it as a bt878 card.

What software are you using then?
or where do i get a newer version of amitv.

I have a tv card ing my a1 what software would be best to use?
I have downloaded Amitv but cant get any signal from it.

Its a pci to 2 channel ide controler.

Its ok, connected a disk to the controler and os4.1 picked it up right away, way cool os

Does os4.1 have support for tha above controler, if so how do i get it to work.
I have an A1G3-SE with os4.1 installed and the aboce controler but cant see it in mediabox.

How do i load .adf images once the emulator has started, how or is there any menus or such or a gui for e-uae