@khayoz
A-Eon

@jabirulo
Many thanks 😊

Can anyone tell me why the "Updater" is not working? When i run it, it just hangs. 😡

@daveyw
Many thanks for the reply.
I traced the problem to the router blocking the MAC address.
All sorted now, thank you.

@davebraco
Thanks for the reply
Yes, I watched the video but the connections just will not work.
Maybe the OS has not installed properly.
I shall give it another go on Monday and reinstall the OS. Then try again.

@mbrantley
Thank you MBrantley

@skynet
Thank you SkyNet 👍😊

Hello all.
The OS has now been installed (with much less hair).
The only problem i have now is getting the modem to work.
As far as i can see, there are two modem RJ45 connectors. One on the motherboard and one as an added card.
The two questions are, which one do i use and how to set it up to go online.
Here are the results:
1. https://www.dropbox.com/scl/fi/mm0gplx ... 3q442rg8&st=3h95han7&dl=0
2. https://www.dropbox.com/scl/fi/us4nx8p ... vttwz8sl&st=4axu93x9&dl=0

Ok. I have now sussed the problem.
The onboard RAM was defected and after purchasing the new RAM, everything worked perfectly.

I would like to thank everyone that took the time out to give me a hand working this out.
Very much appreciated.

@nbache
Thank you and yes it is.

@rjd324
Thanks for the reply.
I have now received the Serial / Data cable, however i am not sure what or how to use it.
I have tried booting from a Linux CD ROM but the Amiga does not boot from it.

@rjd324

I did not manage to boot the Amiga due to the fact I need the BIOS on a new SD Card, which I cannot get.
A new Serial Data lead has been ordered and should receive by late afternoon today.

@rjd324
It's an ASUS R7240 2Gb Radeon GFX card.
The USB thumb drive has booted up before with this card in the motherboard, that's why I think it is the SD card that is at fault here.

@rjd324
Its a ASUS Radeon one.

@balaton

I'm afraid i don't balaton.
Anymore ideas / suggestions?

Ok. An update as to where i am now.
1. I have replaced the battery onboard the motherboard.
2. I have now received the USB Boot thumb drive but after switching on, it just hangs and goes no further, no grey screen or boing ball.
3. I removed the GFX card and cleaned it up (it was looking good), removed the RAM and cleaned the connections on that as well.
4. I am beginning to think that the SD Card with the BIOS on, is corrupt.
Does anyone know or can supply me the SD card with the BIOS on it?
Many thanks for helping me out so far.

@sailor
I have logged in but cannot find the file.
Can you give me a direct link to it please ?
Many thanks.

@Tuvok
Yes, you are perfectly correct Tuvok 😡

@Tuvok
Thanks for the reply.
I did have a USB thumb drive but that has now corrupted and left me unable to boot the machine.
I would prefer a CDrom.

I'm not getting anywhere now. The thumb drive is corrupt and i cannot boot into Workbench any more !!

HELP !!!