@alfkil

Hi, Only to report that Bananabar crashes my Sam440EP OS4.1.6.
Happy NewYear for all

@AmiDark:

Good news to know you are getting better, hope you get well very soon.
Keep your great work with your Amiga if it makes you feel good.

All the best for you.

@jaokim

It's great to see that this project is on the move again.
Thanks for the great work

@samo79

Thanks, I´m still in Update 4 :( will update to 6

Where could I download the kernel 53.58?

@Elwood

I will replace but first I need to format my CF card so could backup my files.

What´s the best file system to use with a boot partition with 2GB and another non boot partition with 27GB to a Sam440ep 667Mhz and OS4.1.4?

The file system used in my OS4 it´s SFS 1.286.
I´m already formating a 32GB CF card so can backup the files but since the start of formating 1st partition of 27GB, 9 hours ago, only 21% are formated.
Why it´s formating so slownly (21% of 27GB in 9h)??.. It´s that normal?
What´s the best file system to use with a Sam440ep 667Mhz and OS4.1.4?

Hi, help needed.
Sometimes my OS4 hard disk makes weird noises and right after a message of file reading problems appear.
What's the best software so I could verify/repair my OS4 hard disk?

Thanks in advance

@Spirantho
Thanks for your offer but I will try to get some kind of drive emulation so I can read Dos disks

@Elwood
I have OS4.1 and my PCTask runs ok but I desabled parallel and serial ports, Extended memory = 32768 and in Advanced Video Options put Window and Graphics Update = Immediate SVGA 2Mb 640*200*16

@All

Thanks for your help guys,
I'm already running PC_task 44 in my OS4.1 but now I have another problem.. how to install dos without a disk drive?

There is any way to emulate a dos disk through RAD:?
Maybe editing PC0: driver so it use RAD: instead DF0:.. Is that possible?

@hotrod

What version of OS did you had on your A1 when you use PC-task on it?

Tried to install pc-task in my Sam OS4.1 but it didn?t pass from first screen (where we config drives) does pc-task runs in OS4.1?
I read in Amiga.org that it runs in classic with PPC OS4 but need to change the locale to one that doesn't use the euro-symbol

After tried hard modifying .uaerc finaly can run whdload but every game I run (no matter if run in WB directly or through RunInUAE) didn't show any image in UAE screen, instead show a black screen and some odd patterns.
When tried to configure Picasso 96 it says that there is no gfx card attached so I run in HiRes laced.
Any Ideas about what could be wrong?

I have a SAM667EP and run E-UAE 0.8.29 - amigfx, here is my .uaerc:

#hardfile2=rw,DH0:Work:Storage/Amiga.hdf,32,1,2,512,1,
kickstart_rom_file=Work:EUAE/Kickstarts/Kick31.rom
filesystem2=rw,DH0:System:Work:EUAE/System39,1
filesystem2=rw,DH1:Work:Work:Jogos,0
#filesystem2=ro,CD0:AmigaOS3.9:Work:Storage/AmigaOS,0

joyport0=mouse
joyport1=kbd1

cpu_type=68040
#amiga.screen_type=ask
cpu_speed=max
cpu_compatible=false
cpu_cycle_exact=false
#cpu_24bit_addressing=no
show_leds=true

chipmem_size=4
fastmem_size=0
z3mem_size=32
gfxcard_size=4

chipset=aga
immediate_blits=true
collision_level=full

gfx_framerate=1
gfx_width=1280
gfx_height=1024
gfx_width_windowed=720
gfx_height_windowed=568
#gfxcard_size=16
gfx_fullscreen_amiga=no
gfx_fullscreen_picasso=no
gfx_linemode=double
gfx_correct_aspect=true
gfx_center_vertical=smart
#gfx_lores=no

hide_cursor=true

sound_output=normal
sound_bits=16
sound_frequency=11025
sound_channels=stereo

@LiveForIt
Thanks for your hint but that lines already are in my UAE S-S from the beginning.
What was in fault at S-S is "C: AddDataTypes REFRESH QUIET" but already fixed it.

@ChrisH

I know .uaerc_RunInUAE it?s ok.
I installed WB 3.9 in WinUAE and then I made a copy of the folders to SAM440 but they are write-protected from beginning.
Now I?m in doubt if it was better to install WB 3.9 directly from E-UAE

@ChrisH
Yes I do reinstall RunInUae.
Seems to be a problem in WB 3.9, I discovered that all files in it are write-protected.. could it cause a problem?

@magic
Do you reedit .uaerc to include the full path to your roms?
Do you already tested your roms so can know if they are not corrupted?.. are they the right version?

Now I installed a new fresh WB 3.9 but when tried to run a game in RunInUAE with "Basic Workbench Mode" enabled it opens a window inside WB screen with the title:

"StuntCarRacer starting... Please Wait!"

and nothing more happens.. if I close this window it stays in WB screen

@ChrisH

Thanks for your reply
Tried to run in "Basic Workbench mode" but with no luck, results in same error.

I will try to install a new hdf drive with a fresh Workbench 3.9, maybe it?s something in SS or user-SS of the old WB3.9 that make the error.

Hi there,
I'm trying to run classic games with RunInUAE inOS4.1.1
I have installed WHDLoad to E-UAE with the respective key in L:
and have an hdf with WB 3.9 with WHDLoad installed too.
All seems ok but when I try to run a game this error appears always in the cli window:

EXECUTE: Can't open ":T/command-0-T1"
object already exists
execute failed
return code 10

Tried snoopy to trace the error but without sucess because it only traces the OS4 and the error it's in the OS3.9 side :(

Any ideas why this happens?

@all

So.. shoot a program that you want to see on our platform so we can start the discussion

My wish is.. A package that have a Word processor and a Spreadsheet that can read/write Word .doc and Excel .xls types. Could be OpenOffice or, for instance, Cinnamon Writer(if the author wants)

First we must reach an agreement ourself about the software we want to develop, then knowing already the amount needed we must join the money.
I think that it?s better ask to the developer how much money he wants to make the software we need and make a dead line to finish instead keep paying to the developer a salary.