I am testing the 4.1FE with Voodoo3
I have these libraries in the Warp3D / HWdrivers drawer:
W3D_AvengerLE.library
W3D_AvengerBE.library
W3D_Avenger.library

I noticed for example that instead for the Radeon or the Voodoo model 4/5 there is only one library and not three.
Why are there 3 libraries for the Voodoo3?
are all three needed?
Thanks everyone for any help.

@smf
thanks for the reply you were very kind

For amigaos4.1FE with Voodoo3 "pci mediator" you need to install special drivers or those included in the amigaos4.1FE cd are enough.
Thanks for any suggestions

@Cass
it probably doesn't help much
i use the 4.1FE with winuae and the jit works with the killing ground 3D II
the configuration of e-uae is similar to the one posted by Raziel but I also tried his and it works.
https://www.youtube.com/watch?v=Kzlk9RCwaDY

@tekmage
Unfortunately I never had real hardware so my experience is based on winuae only.
some little things differ in winuae however unlike real hardware.

If you just need to complete the internet connection then I recommend using RTL8029-PCI as a "driver"

If during use you happen to have lag or other problems then you can use ethernet.device is probably more compatible with your modem-router in this case.
But I advise you to try RTL8029-PCI first

You must also enable one of the two peripherals you have available in PCI bridgebords:
Mediator or G-Rex
Mediator is generally the recommended one.
I personally use G-Rex it allows to allocate more memory in winuae.
To activate G-Rex in the startup-sequence there is a floppy.adf in the 4.1FE CD in this case if you need some advice I'm happy to help you.

As an audio driver sb128 is currently the best choice.
Paula makes the sound heard and seems to work but in reality with more advanced configurations and while using the applications you will do later you will encounter problems.

The A2065 like RTL8029 can stop working in case if you try different configurations like choosing PCI etc.
But once you have your final setup this will never happen again except in very rare cases.

I made a small video on how to connect to the internet via RTL8029-PCI is also valid for Ethernet.device the procedure is the same:
https://www.youtube.com/watch?v=SF-Ivs0OZ_w

if you have to delete your old configurations the previous advice on how to do it is valid.
I hope it is useful, I am pleased to find people who use 4.1FE with winuae, currently there are not many who use it.

@Lio
thank!
@kas1e
thank you very much, now I try,
I saw in your video the use of DN is very useful.

dosbox works i can't just mount an .iso
https://www.youtube.com/watch?v=Z6ApMjY8Jfc

I wanted to try DosBox and it works I added DosNavigator to work better.
I tried from line without using DN command to mount an iso but I can't I used the following command:
imgmount C C: \ tombraider.iso -T iso
the message appears that the iso is mounted
the iso is mounted but I can't work with it.
Am I wrong something? dosbox for amigaos 4.1FE support access to iso?
Should I use another command?
Thanks for any suggestions

Hi tekmage,
if you have errors in the configuration in the wizard it is normal that it happens a few times in winuae after having already made a connection or having the wrong procedure.
Do it like this:
Start the emulation from Floppy and CD as if it is the first time you are installing.
Select Live CD
then delete in Devs / NetInterfaces / your configuration (ethernet) <---
then delete in Devs / Networks / the ethernet.device file <---
reboot your system normally and copy ethernet.device again
in Devs / Networks /
Restart normally and repeat the wizard, now everything will work.


separate note:
your configuration must be right so:
expansion -> network adapters -> A2065 enabled
then
network mode -> SlirpOpenPorts
just follow the wizard and choose automatic and the ethernet.device "driver"
I hope it's useful, that was what you were looking for?

@walkero
Solved, it was a problem of RTG tables now everything works
Thanks again!
here the video other useful tips I really appreciate them
https://www.youtube.com/watch?v=nmiQ6ZyWAB8

@jabirulo
thanks for the link, I will look at the various collections

@khayoz
Thanks, perfect, it took me a moment to replace them.

Can I also replace application icons this way without losing the tooltypes and stacks?
So I don't check them one by one it would take a long time to do it

@Raziel
Thanks, I thought I had the wrong installation.
Too bad the package does not include the entire set to replace all system icons.

Hi,
I was dedicating myself to the aesthetic configuration of the 4.1FE.
I have seen that the Enhancer package includes black icons but I have seen that it does not replace all of them but only some.
There is a set of icons in black color with an automatic installation of the set.
Or do I have to replace them one by one?
What program do you recommend to manage icons.
Thank you.

@salass00
I use the version which V53.9 in 2017
I just thought the new library was not compatible with my configuration.
Thank you

@TiredOfLife
i don't use real hardware but winuae
i have the system installed on a real hard drive with "x76" initialization marked as "hide" on a dedicated partition
as amitlhon did many years ago '
TrueImage for windows is able to make a backup copy of the entire hard disk and then restore it in case of need
Fortunately

Tonight i found on amiupdate the z.library library between updates on reboot simply remains a gray screen
I tried 3 times to redo the update but the problem remains.
Fortunately I have a backup of the system.
Has anyone encountered the same problem?
Thank you.

@walkero
The sound now works better is not perfect but now it only occasionally slows down with more applications open.

@all
This is the result of the advice you have given me together over time in this forum.
And also in other forums, I always ask I try to learn.
AmigaOS4.1FE is a nice system I like to use it.
I know the limitations I may have without having a real machine.
But this ignites my old amiga spirit, like when I used and discovered 3.xx many years ago.

I hope to always find some advice. Thanks again.

@walkero
Thanks it works Amiga + m the video is brought behind the workbench and I can only see it if I click on the workbench gadget at the top right.
But if I try to swipe the screen back and black.
I probably need to activate some options in the GUI preferences
I have already activated the composite etc. this makes the system very stable.

here the video is easier for me to explain

Thank you very much for your help
https://www.youtube.com/watch?v=13tL9fIgmHY

@walkero
@K-L
@all
I really appreciate your advice I have learned a lot from your advice and still learn

I can use Emotion Player in full screen:
https://www.youtube.com/watch?v=oILC8Q1b57E

But i can't make that step but no matter my aim is to have a working system.
And that's probably not possible for me.

I would like to ask another question this inherent to audio management, this is of fundamental importance for me because it would help me manage the processes of the AmigaOS system but at the moment I don't fully understand its mechanisms.
I played the above video of the X5000 obviously with my limitations.
And I noticed that some applications conflict with each other precisely for audio.
I give an example:
If I use an application such as BoingCube with the audio activated and then I also watch a Video with the audio activated, the applications slow down.
On the other hand, if I exclude the audio of the Video, for example, the system is not affected, everything is fast.
I also understand that it makes no sense to use multiple applications at the same time I am aware of this.
But this would help me to better understand the AmigaOS way of handling audio and its possible processes.
It is possible to somehow overcome this problem by assigning audio resources differently (for example by creating new processes) or it is normal for this to be the case.
Or am I wrong settings in the audio management preferences should I increase the audio channels?
Thanks again,
I also take this opportunity because I am happy I have made great strides also with E-UAE it is practically perfect I put both videos here:

E-UAE
https://www.youtube.com/watch?v=Kzlk9RCwaDY

here my REPLICA of the X5000 video of which I speak above:
https://www.youtube.com/watch?v=YkpAB6upH5s

Thanks again!

Hi,
I apologize, if I always ask for advice but I always try to improve.
I have reached a good configuration, and I try to find the best settings.
I've seen this video working on an X5000
At 2:01 he manages to bring the video behind the workbench with emotion player.
How you can get it would help me a lot.
It seems to me that you do not use Dopus or I am wrong.
here the video of the X5000
https://www.youtube.com/watch?v=cqMIrClXN0A

here instead my results obtained, I would very much like to continue improving. Thank you
https://www.youtube.com/watch?v=bdNE9mdagRM

@amigakit
Hi, thanks for the updates,
I saw that there is the possibility to download MUI R2 but on restart it tells me that I still use MUI R1
thank you!