I'd like to use both versions of CodeBench. What is the best practice to install the HW and the GCC version together?

Created an svn repository used by the AAMP Subversion package. I can't use fully the Syncronize function of CodeBench with it. Is that svn release supported/tested?

Tmxviewer has problmems with Amiga path.

Try this:

7.Tool:Tiled/bin> tmxviewer Tool:Tiled/examples/desert.tmx

It brings an assign requester, and then crash with this stack trace:

_ZN9TmxViewerD1Ev()+0x118 (section 9 @ 0x3454)
main()+0x6a0 (section 9 @ 0x1200)
native kernel module newlib.library.kmod+0x0000208c
native kernel module newlib.library.kmod+0x00002cec
native kernel module newlib.library.kmod+0x00002eb0
_start()+0x170 (section 9 @ 0x170)
native kernel module dos.library.kmod+0x00022d9c
native kernel module kernel+0x00043fbc
native kernel module kernel+0x0004403c

@kas1e

Tested it several ways, but can't reproduce the crash that you experienced.

@cha05e90:

It took almost a day. Impressive!

It's working greatly if the stack is great enough.

Thanks! I love you

To add another one to the list, here is my wish: Tiled

According to http://www.mapeditor.org/ it is built on QT.
Have any of the the porting geniuses looked it before?

My vote goes to zzd10h for porting SQLiteMan.

Thanks!

You can check if DMA is enabled on a device with idetool. Here is how it works here but you have to change ide device name of your machine:

8.Workbench:> idetool -l peg2ide.device
-------------------Unit 0 information------------------------
Flags : $000001A7 - present, LBA48 used, supports DMA, ATA, supports acoustic mgmt, supports cache flush, interrupts used,
Xfer mode : best pio 12 (PIO 4, 16 MB/s) / best dma 69 (UDMA 5, 100 MB/s) / current 69 (UDMA 5, 100 MB/s)
Total blocks : 398294975
Blocksize : 512
Power mode : 2 / idle (ready for operation)
IO1 / IO2 / BMCR @ : $1000 / $100E / $1020
spurious interrupts: 0
bounced misaligned cache line start DMA requests: 447
bounced misaligned cache line end DMA requests: 0
bounced non-contiguous buffer DMA requests: 26
-------------------Unit 1 information------------------------
Flags : $00000187 - present, LBA48 used, supports DMA, ATA, supports cache flush, interrupts used,
Xfer mode : best pio 12 (PIO 4, 16 MB/s) / best dma 69 (UDMA 5, 100 MB/s) / current 69 (UDMA 5, 100 MB/s)
Total blocks : 976773168

PageStream 2.2 seems to be broken by one of the recent OS4.1 update. AFAIK on 4.0 it worked.

The 3.0 had several problems, so that shouldn't be bothered. If you really want to use PageStream upgrade it to 4.1.5.6. That one has its own problems too, but it is able to use for productive work.

One thing I dislike in AmiUpdate and that is the first position in the Workbench menu.
For several years that menu was untouched. Amiupdate is not a tool that is normally should be used daily. I think it would be a better place for it somewhere around Workbench/About.

Yeah! A reinstall solved my RollBack problem too. All previous installs are listed there, so nothing missed, just not listed before.

Thanks for the tip!

@spotup

Quote:

Tiled would be very useful. Is there any progress on that port?

@elwood:

Quote:
He refers that for the winuae config to compare with the x86 JIT.

@salass00

If you have no other PSU to check it, maybe you could try disconnecting every device (HDD, CD, add-on card) from the motherboard except the monitor and try to boot. That lowers the power consumption and maybe that help the PSU to start normally. However that would be just a check to see if the MB is fine.

Quote:

It is sounds like the noise of a tired PSU. Parts of it is working even when the machine is turned off. There are some capacitors that could leak its electrolyte by time. A power supply circuit with defective capacitors can do strange effects and may die slowly. If you can't replace the PSU just try to open it and check those parts.

More about this : http://en.wikipedia.org/wiki/Capacitor_plague

I love the quality how old mods can play that uade.

Thanks for it!

Quote:

You are right about that. We can't be sure that Hyperion has the source/right to develop it further. However it is part of the OS distribution, that should mean something.

Anyway, do you know some place where bugs can be reported for Vpdf? I can't find any word beside the executable.

Good luck for the porting!

I have just tested Vpdf 1.1 included MOS 3.1.
Let me tell you that it is not matured enough yet IMHO. It has some gui bugs, and lacks some features that AmiPDF has. It displayed some files incorrectly which displayed correctly even with Apdf on MOS. Can't find among other things bitmap printing, find and clipboard functionality. The toolbar is fixed horizontally and can't move to the side which is a vital feature to view paper sized documents.
There was some files which handled faster than AmiPDF, some not much faster. It IS faster, but not mindblowingly.

I don't sure we talk about the same version, but that was my first impression. AmiPDF has room for improvement that sure, but I'm tired this constantly start from ground situations instead of real ongoing developments.

Hi!

Old problem got solution.

Michael Christoph was so kind to release a fixed myApacheStarter on his website.

According to Michael this will be part of the next AAMP release by Edgar. Until then you can download separately and replace the old one. It is version 3.01 and runs without problem on update4.

Thanks Michael!

@ cygnusEd

It is strange that you don't have this problem. Tested it on another machine and it behaves just like mentioned in the first post.

Here is myApacheStarter V3.00 (2011.03.11.)

However mySQLcontrol works normally, and I think both are compiled around the same framework.

So at least strange it is.

Bye!

Hi!

AAMP native was used a lot here before, but recently I didn't touch it.
Not sure, but IIRC it was used before update 3.

Now when I start myApacheStarter, application.library gives me this:

"... has opened version 2 of the interface 'application', but tried to pass version 1 tag definitions to application.lib!"

The app. can't start, however the Apache server can be started via the Start_AAMP script.

Tried to replace application.library from an update 2 install and that solved the problem, but that one is obsoleted for other softwares.

Is there an update for the AAMP package or there is smoething wrong with my system?

Bye!
Lazi