@Tuskagee

I got one of these off ebay and just put it in my sam 460ex today.

WirelessManager reports successful wifi connection if i put it in verbose mode or run it manually rather than in startup.

I created an networkinterface and set it to dhcp, and shownetstatus reports it has an IP and gateway and dns assigned.

But no traffic is flowing, even if i do a DOWN/UP or a OFFLINE/ONLINE with configurenetinterface i can't ping and i can't do DNS and no browsing works, but it works of course over wired interface if I plug that in and enable that instead.

What am I missing?

There are many problems with the Format app in Enhancer, are these known? Not least, when you choose a drive from the picklist, it populates the format dialog with the 'selection - 1' from the picklist i.e. the wrong bloody disk!

I recently acquired a second hand Sam460ex. How do I tell if I have the latest uboot version?

And how do you get it to dual boot MorphOS/AmigaOS?

I have been trying to contact ACube, I need a backplate for the board as it was missing, but they ignore all contacts I can find for them. Has anyone contacted them successfully lately?

I have a Sam640ex with Radeon HD 6450 (AMD Sapphire) card and I just bought Enhancer Plus so i could get access to driver version 2.22, which fixed all the problems I was having with version 1 of that driver that my second hand Sam came with. It seems my card is not powerful enough to run Warp 3D Nova, and I don't want to change it for a noisy, hot, large card as my current one is silent, low power and fits in my compact case. But I would upgrade to the latest version anyway, if only I could figure out how! Something to do with Amisphere, but not clear what one needs to do!

I have an AMD Sapphire Radeon 6450 in a Sam460ex with Radeon HD driver 2.22. It works nicely so far, it's half height and passively cooled but I don't think it works with Warp3D Nova. Everything else works though. Does anyone know a better card that is still passively cooled (i.e. silent) and half height/low profile?

The main problem I have is just HDMI port does not work, but DVI does so I can still use that.

@TiredOfLife

Hi yeah I might though the current case I have doesn't have a external access for it. Also I'm using the PCI slot for the wifi card, though I'm looking at getting a PCIE adapter to use with the wifi card so I can still use the onboard SATA, or use a PCI SATA card that it also came with. But generally speaking I don't need a CDROM very much, I have all my UAE setups and all my old Amiga software cloned onto a single massive USB stick I can move between computers including this one, and therefore mount my ADF, and CD images using DiskImage

Hi I'm new here, was told over on AW.net that this is the best place for AmigaOne discussions?

I recently acquired a Sam 460ex on ebay, and am looking for advice for how to set it up optimally.

So far I have put it in the smallest microATX case I can find, although that's still fairly big compared to miniITX cases. I've populated it with the following:

- 2GB RAM
- SD card for boot disk, running OS4.1FE Update 1
- Radeon 6450 that it came with. I know it's not the most powerful card but it's passive (silent) and half height and it works and has 1GB video RAM. I've bought Enhancer to get the updated driver.
- A 3Com wifi card with atheros chip that's known to work (and almost does... see separate thread for that)
- Connectors on all the USB headers to maximise (I mean, why use a hard disk, it's 2020)

I got a 1U small PSU for it but it's noisy a.f. so I'm replacing it with a PicoPSU and a silent unit.

It's missing its original backplane - anyone know where I can source one? ACube aren't answering their emails.

I've tried an external USB DVD drive I had lying around, and it's recognised but doesn't work (and makes all attached USB devices freak out). Any thoughts?

Anyway apart from all that, what other recommendations do you guys have?