I have tried a DWL G520 also on a Sam Flex, (it is second hard, Ebay)it does not want to know, it is listed as a "maybe" in the readme. Have ordered a Netgear to try instead.

Maybe a tread of what is found to work an idea.

Sam 440 Flex

Fitting a usb stick to the connector attached to J19a then powering up, I have the following:

ERROR: CTL:TIMEOUT

This does not occur with it's sister port J19b

Powering up without the usb stick in J19a and once Workbench has appeared fitting the usb stick to port J19a there is no error.

Kingston 2gb and 4gb used

Regards

@ broadblues

In graphical form a request to insert a disk

Best Regards

@ Broadblues

Have it in J23, tried it in J20 there it works to a point but then halts with a request.

Best Regards

@ ssolie

Kickstart halts on loading, due to an self inflicted error while installing graphic driver, then found my AOS4.1 disk would not boot from the DVD Drive. Entering "sii3114_conf1002" was in hope that it would be a solution, not so. Am locked out.

Best Regards

My SAM 440 Flex will not boot the AOS 4.1 cd.


The SATA data cable is in J23

SATA data cable has being checked.
Power cable has being checked.
DVD Drive has being checked.

* checked means replaced with another


Best Regards

saveenv is now working.

After entering the command I kept my finger on the return key longer than I would normally, I have a PS2 keyboard with a usb adapter, maybe there in was the cause.


Best Regsrds

I have a Sam 440 flex.

Need to enter setenv sii3114_conf1002, when entered I next enter saveenv, result "saving environment to EEPROM....".

It however then will not let me enter " reset" or any text.
Have tried numerous times.


Best Regards.

@ Chris


Correct, the Sata cables were incorrectly placed, in the transfer from one case to the other was sure that I had not unplugged them, I am getting old.

@ Thematic

Thats a relief as I have AOS4 and Linux on the drive, would be a heartbreaker to reinstall everything

Have switched cables. No differance

Bought this system all set up, does reconfiguring boot priority destroy data on harddrive

Have moved my Sam 440 from one case to another.
Was working perfect prior to change

Now have the following:

IDE Device 0: not available

AOS4 FLB

FLB: No SLB found in any of the designated boot sources;

Returning to U-Boot Press any key to continue

Suggestions Please

It,s a classic G8

Using the ipod itself

I was saving an album to the ipod

Thank you

The following occurs, have tried a fresh install

Use of unitalized concatenation (.) or string at /SDK/Local/clib2/lib/perl5/site_perl/5..5/Mac/iPod/GNUpod.pm line 190

Expected to find files, failed to get 0 at apod line 1826

With thanks

APod is up, looking forward to using it over the weekend.

Many thanks

Finding this


Undefined subroutine &main::RBNA.Labels called at apod line 529

With thanks.

Thank You

Absent:
sdk:local/clib2/lib/perl5/site_perl/5.8.5/MP3/Info.pm

Present:
sdk:local/clib2/lib/perl5/site_perl/5.8.5/MP4/Info.pm

Absent:
package MP3::info

Present:
package MP4::Info


Regards,

Unpacking to hard disk, no use of ram disk, have the following (Ver. 3)

Can't locate MP3/Info.pm in @INC (@INC contains: /SDK/Local/clib2/lib/perl5/5.8.5/ppc-amigaos /SDK/Local/clib2/lib/perl5/5.8.5 /SDK/Local/clib2/lib/perl5/site_perl/5.8.5/ppc-amigaos /SDK/Local/clib2/lib/perl5/site_perl/5.8.5 SDK/Local/clib2/lib/perl5/site_perl .) at /SDK/Local/clib2/lib/perl5/site-perl/5.8.5/Mac/iPod/GNUpod/utils.pm line 15

BEGIN failed--compilation aborted at /SDK/Local/clib2/lib/perl5/site_perl/5.8.5/Mac/iPod/GNUpod/Utils.pm line 15

Compilation failed in require at / SDK/Local/clib2/lib/perl5/site_perl/5.8.5/Mac/iPod/GNUpod.pm line 55

BEGIN failed--compilation aborted at /SDK/Local/clib2/lib/perl5/site_perl/5.8.5/Mac/iPod/GNUpod.pm line 55

Compilation failed in require at apod line 12

BEGIN failed--compilation aborted at apod line 12


Regards

Yes, you are correct, I unpacked to ram and clicked installer then.

Will do as you suggest tonight.

With thanks