Login
Username:

Password:

Remember me



Lost Password?

Register now!

Sections

Who's Online
93 user(s) are online (49 user(s) are browsing Forums)

Members: 1
Guests: 92

VooDoo, more...

Headlines

 
  Register To Post  

u-boot messages gone SOLVED
Just can't stay away
Just can't stay away


See User information
After switching sata cables between dvd end HD booting is still possible for both, but i don't see the u-boot interface and messages any more

nvgetvar gives me

baudrate=115200
loads_echo=1
hostname=Sam460ex
stdin=usbkbd
ide_doreset=on
ide_reset_timeout=15
ide_cd_timeout=20
pcie_mode=RP:RP
pciconfighost=1
bootcmd=menu; run menuboot_cmd
menucmd=menu
boot_method=boota
usb_enable_4x0=1
usb_retry=1
usb_ohci_power_down_before_reset=1
scan_usb_storage=1
ethact=ppc_4xx_eth0
ethaddr=00:50:c2:80:d5:b4
serdes=sata2
video_activate=pci
hush=0
ipaddr=192.168.2.50
serverip=192.168.2.222
stdout=vga
menuboot_cmd=boota
ver=U-Boot 2010.06.05a (Jan 30 2012 - 16:06:56)
boot1=ssii
boot2=ssiicdrom
boota_timeout=2
menuboot_delay=2
os4_commandline=debuglevel=0
bootargs=root=/dev/sda3 console=tty0





Edited by JosDuchIt on 2017/8/22 15:56:39
Go to top
Re: u-boot messages gone
Just can't stay away
Just can't stay away


See User information
@JosDuchIt

But you get AOS4 bootscreen and Workbench?

What monitor <-> sam460ex video connectior do you use? vga,dvi,hdmi?

My UBoot variables (so you can take a look and make diff):
#c:NVGetVar
baudrate=115200
loads_echo=1
hostname=Sam460ex
stdout=vga
stdin=usbkbd
ide_doreset=on
ide_cd_timeout=20
pcie_mode=RP:RP
pciconfighost=1
bootcmd=menu; run menuboot_cmd
menucmd=menu
boot_method=boota
usb_enable_4x0=1
usb_retry=1
scan_usb_storage=1
ethact=ppc_4xx_eth0
ethaddr=00:50:c2:80:d5:90
ide_reset_timeout=2
s4sii_maxbus=1
filesize=2A3B
fileaddr=2000000
ipaddr=192.168.1.201
serverip=192.168.1.200
boot1=s4siicdrom
boot2=s4sii
boota_timeout=3
menuboot_cmd=boota
bootmenu_waitticks=150
ver=U-Boot 2015.a (May 16 2015 - 14:20:11)
video_activate=pci
hush=0
x86emu=1
serdes=pci-e
ddr2_boost=0
menuboot_delay=2
os4_commandline=debuglevel=4 MUNGE SERIAL
bootargs=root=/dev/ramdisk file=/cdrom/preseed/ubuntu-mate.seed boot=casper rootdelay=10
#

Go to top
Re: u-boot messages gone
Just can't stay away
Just can't stay away


See User information
I can't see anything related comparing your 2 variables list (and with my Uboot var list).

Jos: are you sure you have "video_activate=pci" ?
It seems you have "sm502" here. It means the image is sent to the onboard VGA port and not your graphic card that you have plugged in the PCIe slot.

Philippe 'Elwood' FERRUCCI
Sam460ex 1.10 Ghz
http://elwoodb.free.fr
Go to top
Re: u-boot messages gone
Just can't stay away
Just can't stay away


See User information
@Elwood
It's what nvgetvar gives me

"video_activate=pci"
My monitor is a hp2211x connected to the graphic card with a DVI connector


Edited by JosDuchIt on 2017/8/22 7:33:08
Go to top
Re: u-boot messages gone
Just can't stay away
Just can't stay away


See User information
@Elwood

Was able to recover the messages with
nvsetvar video_num 1

something solved at last

Go to top

  Register To Post

 




Currently Active Users Viewing This Thread: 1 ( 0 members and 1 Anonymous Users )




Powered by XOOPS 2.0 © 2001-2023 The XOOPS Project