Login
Username:

Password:

Remember me



Lost Password?

Register now!

Sections

Who's Online
138 user(s) are online (84 user(s) are browsing Forums)

Members: 0
Guests: 138

more...

Headlines

 
  Register To Post  

How to voltage mod A1-XE cpu module ? need 1.1 volt
Just popping in
Just popping in


See User information
Hello

The 7451 CPU on my module has cracked due to the pressure of my heatsink.

I accidentally bought an energy efficient version of the 7457 which requires 1.1 volt, (MC7457RX1000NB)
the lowest the XE can provide is 1.34 volt.

I'm thinking that changing a resistor on the module or motherboard may do the trick, but which one?


I'm inexperienced with eletronics, can anyone help me out?







If anyone needs a picture of a empty module:

https://s31.postimg.org/ei7psg4ej/Front.jpg
https://s31.postimg.org/sdalono7f/Back.jpg

The silkscreen on the front has discolored a bit with poor lighting (did my best!) making it a bit hard to read,
I think Hans de Ruiter so happens to have (or used to advertise on his site) a program to improve the white point in such images?

Go to top
Re: How to voltage mod A1-XE cpu module ? need 1.1 volt
Just can't stay away
Just can't stay away


See User information
Look at page 10.

http://www.intuitionbase.com/a1_xe.pdf

1.59 and 1.44 are the only documented voltages but if you can measure them there are several available jumper configurations.

Amiga user since 1985
AOS4, A-EON, IBrowse & Alinea Betatester

Ps. I hate the new amigans website. <shudder>
Go to top
Re: How to voltage mod A1-XE cpu module ? need 1.1 volt
Just popping in
Just popping in


See User information
@Severin

There are more VCC_CORE settings in page 13 and 14

Go to top
Re: How to voltage mod A1-XE cpu module ? need 1.1 volt
Just can't stay away
Just can't stay away


See User information
@HelloWorld

Yeah but looks like the range is from 1.244 to 3.54 so not much hope of 1.1

Amiga user since 1985
AOS4, A-EON, IBrowse & Alinea Betatester

Ps. I hate the new amigans website. <shudder>
Go to top
Re: How to voltage mod A1-XE cpu module ? need 1.1 volt
Just popping in
Just popping in


See User information
Does anyone know where I could contact the engineers of this board ?

Go to top
Re: How to voltage mod A1-XE cpu module ? need 1.1 volt
Home away from home
Home away from home


See User information
@Helloworld

Hmm, the XE was developed and build by (now defunct) chinese company MAI and sold by (now defunct) company Eyetech.

You are probably out of luck contacting any of those...and even if you would, i doubt anyone would care

sorry

People are dying.
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg
Go to top
Re: How to voltage mod A1-XE cpu module ? need 1.1 volt
Just popping in
Just popping in


See User information
@Raziel

I doubt they would even remember it at all, wouldn't bother asking if I knew Mai was Chinese.


I'm going to prod the motherboard with a multimeter some weekend..

Go to top
Re: How to voltage mod A1-XE cpu module ? need 1.1 volt
Home away from home
Home away from home


See User information
@Helloworld

I giess you alrerady know or have the AmigaOne XE manual?

Only two settings shown in there4, just with the original printed one i got with my board.

You have to be *very* careful, the chip is fried faster than the lifespan of a new character in Star Trek

People are dying.
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg
Go to top
Re: How to voltage mod A1-XE cpu module ? need 1.1 volt
Not too shy to talk
Not too shy to talk


See User information
@Helloworld

Do these lower power versions have good headroom for overclocking? Maybe you can take up the slack voltage by clocking the chip higher.

Crisot has done rework on the CPU modules so it might be worth contacting him to see if he has picked up any helpful info along the way.

Go to top
Re: How to voltage mod A1-XE cpu module ? need 1.1 volt
Just can't stay away
Just can't stay away


See User information
@helloworld

Probably a silly suggestion but can't you reduce the 5 or 3.3 voltage BEFORE it gets to the cpu card so all the different jumper settings will also be reduced?




Amiga user since 1985
AOS4, A-EON, IBrowse & Alinea Betatester

Ps. I hate the new amigans website. <shudder>
Go to top
Re: How to voltage mod A1-XE cpu module ? need 1.1 volt
Quite a regular
Quite a regular


See User information
@Severin

Quote:
Probably a silly suggestion but can't you reduce the 5 or 3.3 voltage BEFORE it gets to the cpu card so all the different jumper settings will also be reduced?


No, doesn't work that way. The CPU voltage regulator is very accurate and can tolerate large swing in the 3.3 or 5 or 12V input. 5V from the power supply isn't 5.00000V, it's more like 4.7~V to 5.5~V and swings wildly (in microsecond range) with the current load of the CPU. The CPU regulator's job is to make sure it deliver 1.34V at all times, if that's what it is set to.

Software developer for Amiga OS3 and OS4.
Develops for OnyxSoft and the Amiga using E and C and occasionally C++
Go to top
Re: How to voltage mod A1-XE cpu module ? need 1.1 volt
Just can't stay away
Just can't stay away


See User information
@Deniil

That's the sort of answer I was expecting... didn't think a 'longer elastic band' would do the job.

Amiga user since 1985
AOS4, A-EON, IBrowse & Alinea Betatester

Ps. I hate the new amigans website. <shudder>
Go to top

  Register To Post

 




Currently Active Users Viewing This Thread: 1 ( 0 members and 1 Anonymous Users )




Powered by XOOPS 2.0 © 2001-2023 The XOOPS Project