Login
Username:

Password:

Remember me



Lost Password?

Register now!

Sections

Who's Online
158 user(s) are online (91 user(s) are browsing Forums)

Members: 0
Guests: 158

more...

Headlines

 
  Register To Post  

Radeon HD for Sam 440 Flex
Not too shy to talk
Not too shy to talk


See User information
Could someone recomend working solution for Sam Flex?

I would perfectly happy with something like this :

http://www.aliexpress.com/item/NEW-AT ... =2114.32010308.4.2.fz8tUq

But I ques it will take some time before those drivers are availlable.?

So I would need a PCI - > PCIe bridge wich is proven to work with Sam and low profile Radeon HD wich works with it??

Also there is no OS install media wich has a Radeon HD Basic driver for Sam Flex??? Will it display anything from boot?? How to do a full install with Radeon HD??

Go to top
Re: Radeon HD for Sam 440 Flex
Quite a regular
Quite a regular


See User information
The Radeon HD drivers already work on the Sam 440ep-Flex.
Tested with grahics cards in the HD5000 and HD6000 series.

http://amigaworld.net/modules/newbb/v ... p?topic_id=36053&forum=14

http://amigaworld.net/modules/newbb/v ... wmode=flat&order=0#759758

If you have a working Radeon 9250 then first do your AmiagOS FE installation.
Then Install the Radeon HD driver.
Then install the Radeon HD card.

Another method involves a working OS 4.1 machine,(winuae + OS 4.1FE classic may also work) to create a custom AmigaOS 4.1 FE iso with the radeon HD driver .

Third method using Aros/MorphOS and the AmigaOS 4.1 FE CD to create a custom OS 4.1 FE thumb drive or SDCard install with the RadeonHD driver .
You need a SDcard reader that Uboot will recognize and boot from or a thumb drive that Uboot will boot from. Both sized under 2GB . You also need a special boot image to write to the SDcard or thumb drive first to make it bootable under AmigaOS 4.1 . The Radeon HD will show uboot so the required Uboot variables can be set to make things work.




Go to top
Re: Radeon HD for Sam 440 Flex
Not too shy to talk
Not too shy to talk


See User information
@Spectre660

Sorry, I wasn't clear, I meant a both driver and warp 3d. I couldn't imagine to have a card without working 3d.

I know that this card mostlikely works with hans's driver, but htere is no 3d for it. http://www.aliexpress.com/item/NEW-AT ... =2114.32010308.4.2.fz8tUq

To be honest, driver without 3d is just half of driver, together they are whole.

Go to top
Re: Radeon HD for Sam 440 Flex
Quite a regular
Quite a regular


See User information
@utri007

Ah.

Go to top
Re: Radeon HD for Sam 440 Flex
Not too shy to talk
Not too shy to talk


See User information
@Spectre660

thanks for your information, very useful:)

Sam460ex 2GB 120Gb SSD&1Tb HD7750 Envy24HT A-Eon Drv 2.10+Warp3D New Uboot
Apollo v4 Standalone
Go to top
Re: Radeon HD for Sam 440 Flex
Not too shy to talk
Not too shy to talk


See User information
@Spectre660

Thanks I got needed adapter information from your amigaworld thread. You are saying that adapter is NOT Limited to 33mhz bus speed? That was one thing I was worried.

I have excatly same machine than you have. Does it make pragtical difference with games?


Go to top
Re: Radeon HD for Sam 440 Flex
Quite a regular
Quite a regular


See User information
@utri007

My Sam440ep-flex died in September last year .
I was using a Radeon HD6670 with it up to then.
Depending on the Game. (no warp3D)
There was an increase when games used composting like Mace.
Also the Hollywood graphics engine
http://www.amigaworld.net/modules/new ... =36878&forum=32&28#689692

Go to top
Re: Radeon HD for Sam 440 Flex
Not too shy to talk
Not too shy to talk


See User information
The current Southern Islands Warp3D driver supports Radeon HD7000, R7 series and R9 series.

Han's website lists compatible cards here.

http://hdrlab.org.nz/projects/amiga-o ... r-hardware-compatibility/

Radeon HD7750 is available in low profile and can still be bought from some places online. You shouldn't have to look too hard.

There are a few low profile R7 250 cards but you need to confirm that it has the Cape Verde core. I found one such card.

http://www.techpowerup.com/gpudb/b275 ... w-profile-micro-hdmi.html

Go to top
Re: Radeon HD for Sam 440 Flex
Quite a regular
Quite a regular


See User information
@Rob

The Radeon HD7750 cards did not work with the Sam440ep-flex .
My experience is reflected in the compatatbility list.
Same card works in a Sam460ex .
Sam440eps may need a Uboot update.

VisionTek Radeon HD 7750 1GB GDDR5 (900549)
Cape Verde 1.0 Working
NOTE: Failed when tested on a Sam440ep. However, works fine with a Sam460ex.

Go to top
Re: Radeon HD for Sam 440 Flex
Not too shy to talk
Not too shy to talk


See User information
OK

Is it so that there is no 3D support for Sam Flex and Radeon HD? Or has anyone get one of these work with Sam Flex Radeon HD7000, R7 series and R9 series?

I'm bit a worried about PCI->PICIe adapter anyway, but 3D support for Radeon 5000/6000 might take some time.

Go to top
Re: Radeon HD for Sam 440 Flex
Not too shy to talk
Not too shy to talk


See User information
@utri007

Quote:
Is it so that there is no 3D support for Sam Flex and Radeon HD? Or has anyone get one of these work with Sam Flex Radeon HD7000, R7 series and R9 series?


I'd assume that if an HD7750 doesn't work then neither will R7 or R9. Hope uboot gets an update that fixes this.

Quote:
I'm bit a worried about PCI->PICIe adapter anyway, but 3D support for Radeon 5000/6000 might take some time.


The PCI versions of 5450 etc use a PCI-PCIe bridge so it's the same setup as the adapters but without the need of a separate card.

The main reason for using the adapter is that you get access to more powerful cards.

Go to top
Re: Radeon HD for Sam 440 Flex
Just popping in
Just popping in


See User information
Resurrecting this old thread 'cause I can't find precise info.

On a SamEp440-MINI, if I buy this adapter: http://www.virtuavia.eu/shop/pci-32-b ... xpress-adapter.html?sl=EN

and this card (radeon HD 7700 low profile):

https://www.ebay.com/itm/165445027647? ... 1HQQQNGSZ1RHVKNETTXMP2N0V

Will it work with accelerated 2D/3D graphics on latest 4.1 F.E + upd2 hotfix + Enforcer software?

Will the Display port work too?

Is there any other configuration (graphic card) that you might propose?

Go to top
Re: Radeon HD for Sam 440 Flex
Quite a regular
Quite a regular


See User information
@Cool_amigaN

The short answer is no.

You need to inject power to the PCIex16 slot.

See my setup here: https://www.amigans.net/modules/newbb/ ... id=124483#forumpost124483


Only vga, dvi and Hdmi work. Display port is not yet supported.

Go to top
Re: Radeon HD for Sam 440 Flex
Not too shy to talk
Not too shy to talk


See User information
@Cool_amigaN

I succesfully tested geennaam's setup with Sam440ep-flex. Here is ( Czech ) article about it.

But if you have Sam440ep ( Mini-ITX, with Radeon M9/9000 ) I cannot recommend this setup.
In this article in paragraph 4.4 I described experiences with PCI graphics card.
In one sentence - it works, but is very slow, becouse external card is in the 33 MHz PCI bus.
Internal card ( and card in Sam440ep-flex ) is on 66 MHz PCI bus.


Edited by sailor on 2024/2/29 7:04:13
AmigaOS3: Amiga 1200
AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, AmigaOne X1000
MorphOS: Efika 5200b, Pegasos I, Pegasos II, Powerbook, Mac Mini, iMac, Powermac Quad
Go to top
Re: Radeon HD for Sam 440 Flex
Not too shy to talk
Not too shy to talk


See User information
Now I have a suitable Radeon HD card and needed drivers.

What I lack is correct adapter. Adapter in this thread seems to support only 33mhz, not a 66mhz Sam Flex PCI.

What would be correct adapter support 66mhz bus, any links?

I have this adapter, which seems to be 33mhz only. Is that true?

https://photos.app.goo.gl/b2arzve4iBAcar6m7

This is how I planned to use it.

https://photos.app.goo.gl/oUzYjLden3XSCHJU6

Radeon card is HD7850 2GB

Go to top
Re: Radeon HD for Sam 440 Flex
Quite a regular
Quite a regular


See User information
@utri007

The adapter in this link supports 66MHz and is known to work: https://www.amigans.net/modules/newbb/ ... id=124483#forumpost124483

Go to top

  Register To Post

 




Currently Active Users Viewing This Thread: 1 ( 0 members and 1 Anonymous Users )




Powered by XOOPS 2.0 © 2001-2023 The XOOPS Project